区域土地利用类型对水源水中溶解性有机物丰度和荧光组分的影响

以潮白河密云段水体为研究对象,采用三维荧光光谱法及平行因子分析解析了潮白河饮用水源中溶解性有机物(DOM)来源和荧光特性,结合方差分析探讨了不同季节和区域土地利用类型对DOM浓度和荧光组分强度的影响.结果表明,潮白河密云段水体荧光溶解性有机物(FDOM)由5种荧光组分组成,包括微生物腐殖质2种,自生酪氨酸,还原醌类和陆...     

基于PMF模型的PM2.5中金属元素污染及来源的区域特征分析

金属元素是大气PM_2.5的重要组成成分,对人群危害性极强且兼具源特异性,分析不同经济模式地区大气细颗粒物中金属污染状况及来源差异,可以为科学规划城市产业布局和保护大气环境提供参考.通过霾/非霾期大气PM_2.5采样,使用电感耦合等离子体发射光谱仪（ICP-OES）测定成都市及仁寿县样品中18种金属元素质量浓度,分析其污染水平,并基于正定矩阵因子分解模型（PMF）解析两地大气PM_2.5中金属元素的来源.结果表明,成都市扬尘源、移动源和燃煤源特征元素占元素总和的比值大于仁寿县,而仁寿县生物质燃烧源、工业源以及燃油源特征元素占比则较高.两地Cr、Cd和As元素浓度均超标,表明PM_2.5中重金属污染严重.随着霾污染加剧,两地PM_2.5中金属元素总量上升,但增幅远低于PM_2.5浓度增长.此外,不同元素在霾期和非霾期浓度比值存在差异,成都市变化范围为0.7（Al）~2.8（Ba）,仁寿县介于0.8（Al）~3.1（Mn）之间,但总的来说两地大致呈现出燃煤和工业活动排放元素增幅较大,机动车污染源次之,扬尘源增幅较缓的状况.受地区产业布局、经济规模和发展模式的影响,大气PM_2.5中金属元素污染水平及来源呈现出不同的区域特征.在重点发展第三产业的大型城市,如成都,更易遭受交通运输和城市建设等带来的大气污染,而在仁寿等第二产业占比不断增加的郊县,其污染主要受化石燃料燃烧和工业过程排放的影响.     

珠江三角洲地区大气中多溴联苯醚的被动采样观测

利用PUF被动采样技术对珠江三角洲地区大气中多溴联苯醚(PBDEs)进行了为期8周的监测分析,以研究该区域中PBDEs的含量及分布.结果表明,内地采样点PBDEs含量为62～625pg/m³,平均值210pg/m³,其中东莞(625pg/m³)和佛山(560pg/m³)是PBDEs的高污染地区,工业点源释放可能是该地区PBDEs的主要来源.香港PBDEs含量为92～420pg/m³,平均值200pg/m³,其中Highst(420pg/m³)和Kwungtong(325pg/m³)的PBDEs含量较高,历史上大量PBDEs阻燃剂的使用可能是香港地区大气中PBDEs残留的主要来源.     

基于CYCBD和麻雀搜索算法的滚动轴承故障特征提取方法

目的解决在较强的噪声环境下最大二阶循环平稳盲解卷积(MaximumSecond OrderCyclostationary Blind Deconvolution,CYCBD)算法在滚动轴承故障特征提取时效果欠佳的问题,为滚转尾翼导弹的尾翼滚动轴承故障诊断提供方法参考。方法提出一种利用麻雀搜索算法(SparrowSearchAlgorithm,SSA)优化CYCBD算法的方法,将CYCBD算法解卷积的包络谱熵作为SSA寻优的适应度函数,利用SSA高效地寻找出合适的循环频率以及滤波器长度,选择自适应参数后,再使用CYCBD算法有效解卷得到周期脉冲特征。结果同时对比SSA优化CYCBD前后进行故障特征提取的包络谱图,CYCBD的噪声幅值不超过0.13 m/s^(2),峰值不超过0.29 m/s^(2),用SSA优化CYCBD的噪声幅值不超过0.08 m/s^(2),峰值不超过0.32 m/s^(2),故障频率成分更加突显,无论是噪声幅度,还是峰值幅度特性,均较CYCBD有了较大改善。结论仿真实验验证了SSA优化CYCBD方法能够更加清晰地辨识到故障特征频率及其倍频成分,其具有良好的工程应用前景。     

不同类型电镀液中阴离子的离子色谱法检测

采用抑制型电导离子色谱法检测电镀液中的常见阴离子.色谱条件是: IonPac AS11-HC阴离子交换色谱柱,淋洗液自动发生装置在线产生KOH梯度淋洗,抑制型电导检测.检测限(S/N=3)在0.29-15.3 μg·l-1,阴离子F-,Cl-,MSA-,NO-3,SO2-4,PO3-4和CrO2-4的线性范围均在两个数量级以上,RSD在5%以下,回收率为92%-110%,具有灵敏度高,选择性好,重现性佳等特点,用于实际样品的检测,结果令人满意.     

交联壳聚糖对铀的吸附研究

以壳聚糖(CTS)为原料,在碱性条件下用环氧氯丙烷对壳聚糖进行化学改性,制得不溶水的交联壳聚糖(CCTS)。利用CCTS吸附铀(UO22+),探讨吸附动力学规律以及初始浓度,pH值的影响。实验结果表明,CCTS对UO22+的吸附符合Langmu ir吸附等温模型,并能用准二级速率方程对吸附动力学加以描述。当在CCTS为10 mg,pH为3,UO22+初始浓度为50μg/mL条件下,CCTS对UO22+的吸附去除率为98%以上。     

铝盐絮凝剂及其环境效应

概述了铝盐絮凝剂的结构、形态分布及铝盐絮凝剂对环境所产生的一些不良影响,描述了铝盐絮凝剂对人体及各种生物体的毒性作用,同时,介绍了对污水后续处理的影响,并作了简要的评述。     

铁炭内电解-厌氧-好氧工艺处理阿维菌素废水的试验研究

血清瓶毒性试验表明 ,AVM对厌氧消化产生强烈的抑制作用。AVM废水经铁炭内电解预处理后 ,COD和AVM的去除率分别达到 19.5 %和 6 8.5 % ,可大大降低废水的毒性。预处理出水再经UASB +生物接触氧化反应器进一步处理 ,当生化系统进水COD为 6 0 0 0— 6 5 0 0mg/L时 ,出水COD为 2 5 0— 2 80mg/L ,总COD去除率达到 95 .6 % ,出水达到生物制药行业排放标准     

Estimation and characterization of PCDD/Fs and dioxin-like PCBs from Chinese iron foundries

The iron foundry industry is considered to be a potential source of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). This study investigated the emission factors and total emission amounts of PCDD/Fs and dioxin-like polychlorinated biphenyls (DL-PCBs) from iron foundries in China. The concentrations and the World Health Organization toxicity equivalents (WHO-TEQs) are presented and the congener profiles are discussed in this paper.In the present work, 26 fly ash samples were collected and tested to quantify the PCDD/Fs and DL-PCBs generated by 14 plants of different scales, and five stack gas samples were collected from two (named as EFG and LFG) of those plants. The emission levels of PCDD/Fs and DL-PCBs indicated that hot-air cupolas had lower emissions than cold-air cupolas. When iron ore lump and sinter were used as raw material, the emission factors were about 250 ng TEQ t⁻¹ of product. However, if the raw material was scrap, the emission factors varied owing to the different contents of organic materials in the raw materials. It was found that the mean WHO-TEQ values of PCDD/Fs and DL-PCBs were 144 and 34.2 pg Nm⁻³ in stack gas and 20.0 and 1.58 pg g⁻¹ in fly ash. In multiple tests, it was estimated that the mean emission factors of PCDD/Fs and DL-PCBs were 365 and 10.9 ng WHO-TEQ t⁻¹ released to residue and 2719 and 555 ng TEQ t⁻¹ released to air. The total emission amounts of PCDD/Fs and DL-PCBs from Chinese iron foundries with cupola furnaces released to residue and air were 16.8 and 146 g WHO-TEQ in 2008, respectively.     

Estimation and characterization of unintentionally produced persistent organic pollutant emission from converter steelmaking processes

Unintentionally produced persistent organic pollutants (UP-POPs) including polychlorinated dibenzo-p-dioxins, and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs), and polychlorinated naphthalenes (PCNs) were characterized and quantified in stack gas and fly ash from the second ventilation systems in five typical converters in five different steelmaking plants. The 2378-substituted PCDD/Fs (2378-PCDD/Fs) and dioxin-like PCB (dl-PCBs) toxic equivalents (TEQs) were 1.84–10.3 pg WHO-TEQ Nm^?3 in the stack gas and 5.59–87.6 pg WHO-TEQ g^?1 in the fly ash, and the PCN TEQs were 0.06–0.56 pg TEQ Nm^?3 in the stack gas and 0.03–0.08 pg TEQ g^?1 in the fly ash. The concentrations of UP-POPs in the present study were generally lower than those in other metallurgical processes, such as electric arc furnaces, iron ore sintering, and secondary metallurgical processes. Adding scrap metal might increase UP-POP emissions, indicating that raw material composition was a key influence on emissions. HxCDF, HpCDF, OCDF, HpCDD, and OCDD were the dominant PCDD/Fs in the stack gas and fly ash. TeCB and PeCB were dominant in the stack gas, but HxCB provided more to the total PCB concentrations in the fly ash. The lower chlorinated PCNs were dominant in all of the samples. The 2378-PCDD/F, dl-PCB, and PCN emission factors in stack gases from the steelmaking converter processes (per ton of steel produced) were 1.88–2.89, 0.14–0.76_, and 229–759 μg t^?1, respectively.