油污染土壤气体抽排去污模型及影响因素

为了开展适合我国实际情况的有机污染土壤气体抽排净化技术研究,在对油污染土壤的通风去污过程机理进行分析的基础上,建立了一个简化机理模拟模型.以华北地区典型土壤为实验土样,油污染物为例,通过一维土柱实验,研究了抽排气体流速、土壤含水率和土质对去污过程的影响.实验表明抽排气体流速存在最佳值,土壤含水率对不同土质土壤净化时间影响不同,对粉砂土,含水率升高,净化效率增强;而对粘质土壤,结果正好相反.对模型预测结果进行实验验证表明,本文建立的模拟模型在实验限定条件范围内是准确和适用的.     

表面活性剂对分枝杆菌KR2生长的影响

研究了表面活性剂的浓度、离子类型和分子结构等对分枝杆菌KR2菌株生长的影响。结果表明，一些表面活性剂在低浓度时可以促进分枝杆菌KR2的生长，高浓度时则会抑制KR2菌株的生长。表面活性剂的离子类型对KR2菌株生长抑制作用的顺序为：阳离子活性剂TDTMA＞阴离子表面活性剂LAS＞非离子表面活性剂Tween80。表面活性剂的直链长度对KR2菌株生长的影响为：直链越短，对分枝杆菌KR2菌株生长的抑制作用越大。     

南京大气细粒子中重金属污染特征及来源解析

利用2011年1月、4月、7月和10月在南京市区和北郊采集的气溶胶样品,研究了南京大气细粒子中zn、Ph、Hg、As和cd5种重金属的污染水平,通过元素相关性分析和因子分析方法,对细粒子中这些重金属的污染来源进行了初步解析。结果表明,南京大气细粒子及其重金属污染严重,北郊普遍比市区严重;As严重超标,cd在南京北郊超标约5倍,zn在市区与北郊的质量浓度均高于其他重金属元素。每种重金属的浓度均随季节而变化。市区细粒子中,As和zn可能主要与燃煤、轮胎灰尘和建筑扬尘等有关,Pb、Hg和cd主要来自交通尘、城市垃圾焚烧等。北郊细粒子中,As、Hg和zn主要来源于燃煤、钢铁冶炼等工业,Pb和cd主要与农作物秸秆燃烧、汽车尾气、道路扬尘等影响有关。     

Comparison on surface properties and desulfurization of MnO2 and pyrolusite blended activated carbon by steam activation

In this study, MnO₂ and pyrolusite were used as the catalysts to prepare modified activated carbon, that is, AC-Mn and AC-P, respectively, from coals by blending method and steam activation. The Brunauer–Emmett–Teller (BET) results indicated that the AC-P had higher surface areas and micropore volumes than the AC-Mn with the same blending ratio. The relative contents of basic functional groups (i.e., C = O, π-π*) on AC-P were slightly lower than those on AC-Mn, while both contained the same main metal species, namely, MnO. The desulfurization results showed that with 3 wt% of blending ratio, AC-Mn3 and AC-P3 had higher sulfur capacities at 220 and 205 mg/g, respectively, which were much higher than for the blank one (149.6 mg/g). Moreover, the AC-P had relatively higher sulfur capacity than the AC-Mn with the same contents of Mn, which might be attributed to the existence of other metals in pyrolusite. After the desulfurization process, MnO were gradually transferred into MnSO₄, and the relative contents of basic functional groups decreased evidently for both AC-Mn3 and AC-P3. The results demonstrated that pyrolusite could be one good alternative to MnO₂ to prepare modified activated carbon for desulfurization.

Implications: MnO₂ and pyrolusite were used as the additives to prepare modified activated carbon from coals by a blending method and by steam activation, that is, AC-Mn and AC-P, respectively. The AC-P had higher surface areas and micropore volumes than the AC-Mn with the same blending ratio. The AC-Mn and AC-P had higher sulfur capacities than a blank one. Moreover, the AC-P had relatively higher sulfur capacity than the AC-Mn with the same contents of Mn. The results demonstrated that pyrolusite could be one good alternative to MnO₂ to prepare modified activated carbon for desulfurizatio.     

氧化锰共生矿烟气脱硫的机理及影响因素

利用南非的氧化锰共生矿进行烟气脱硫,研究了共生锰矿烟气脱硫性能及其机理,并考察了锰矿粒径、反应温度、液固比、进气流量、进口SO2浓度等因素对脱硫率的影响。结果表明,氧化锰共生矿中主要的锰化合物是MnO2、Mn2O3和MnCO3,烟气脱硫过程主要存在4种方式：MnO2与SO2发生氧化还原反应生成硫酸锰;液相中Mn2+催化氧化SO2产生硫酸;MnCO3与硫酸反应生成硫酸锰;Mn2O3与硫酸反应后生成的MnO2可以继续与SO2进行脱硫反应,但是Mn2O3与SO2直接反应的活性较差。氧化锰共生矿烟气脱硫的最佳工艺参数为：锰矿粒径200目、反应温度80 ℃、液固比10:1以及进气流量600 mL?min-1     

Ti/Ru/SnO2+Sb2O5电极的制备及其对垃圾渗滤液的电催化氧化

通过实验探究了不同Ru掺杂量对 Ti/Ru/SnO2+Sb2O5电极电化学性能及表面结构的影响。结果表明：Sb含量10%,溶胶涂覆6层,煅烧温度600 ℃,煅烧时间1 h条件下,Ru掺杂量为10%的涂层电极的加速寿命最长,为50 min;该条件下制备的电极涂层表面金属氧化物 SnO2的特征峰强度较大,峰形窄;涂层表面光滑,无裂缝。同时用Ti/Ru/SnO2+Sb2O5电极处理垃圾渗滤液MBR出水,Ru掺杂为10%的电极对废水COD去除率最高,为93.33%,电解出水芳香化程度大幅降低,对腐殖质和芳香族化合物的去除效果良好。研究对Ti/Ru/SnO2+Sb2O5电极在实际工业生产中的应用具有指导意义。     

不同营养水平下悬浮细菌数量对生物粘泥性质的影响

循环水系统中的微生物有悬浮态和附着态,悬浮细菌的存在对附着态生物粘泥的生长及特性有明显影响。通过向模拟循环冷却水系统中投加不同数量初始悬浮细菌,考察在营养水平不同的情况下,悬浮细菌数量对生物粘泥化学组成和脱氢酶活性的影响。结果表明,营养水平不同,初始悬浮细菌数量对生物粘泥的化学组成和脱氢酶活性的影响程度不同;在不同营养水平下,应分别控制初始悬浮细菌数量。贫营养下,初始悬浮细菌数量应控制在6×105个/mL左右;中营养下,初始悬浮细菌数量应控制在1×105～2.6×105个/mL之间;富营养下,初始悬浮细菌数量应控制在0.11×105～2.6×105个/mL之间最不利于生物粘泥的生长。     

餐厨垃圾厌氧消化中硬脂酸钙的形成及作用

在稳定运行的餐厨垃圾单相厌氧消化体系中,出现白色颗粒状物质,且随着负荷的提高,其数量和粒径不断增加。利用能谱技术分析白色颗粒的元素组成,结合傅里叶红外光谱和13C核磁共振技术分析白色颗粒中的官能基团。经过研究分析认为,该白色颗粒的主要成分为长链羧酸钙盐,具体为硬脂酸钙。同时,对其形成过程进行了分析。该物质的形成对餐厨垃圾中油脂的去除提供了新的思路和途径。     

干湿交替中碳酸化对废物水泥窑共处置产品中重金属浸出的影响

通过比较连续浸出、碳酸化保存间歇浸出和密封保存间歇浸出3种浸出条件下,废物水泥窑共处置产品--混凝土中Cr、Ni、As、Cd和Pb的浸出量,研究了干湿交替的环境中碳酸化对混凝土中重金属浸出的影响.结果表明,不同的漫出条件对混凝土中重金属的浸出产生了一定的影响.间歇浸出过程降低了重金属在混凝土固相与孔隙水(液相)中的浓度...     

Chlorination of chlortoluron: kinetics, pathways and chloroform formation

Chlortoluron chlorination is studied in the pH range of 3-10 at 25 ± 1 °C. The chlorination kinetics can be well described by a second-order kinetics model, first-order in chlorine and first-order in chlortoluron. The apparent rate constants were determined and found to be minimum at pH 6, maximum at pH 3 and medium at alkaline conditions. The rate constant of each predominant elementary reactions (i.e., the acid-catalyzed reaction of chlortoluron with HOCl, the reaction of chlortoluron with HOCl and the reaction of chlortoluron with OCl⁻) was calculated as 3.12 (± 0.10) × 10⁷ M⁻² h⁻¹, 3.11 (±0.39) × 10² M⁻¹ h⁻¹ and 3.06 (±0.47) × 10³ M⁻¹ h⁻¹, respectively. The main chlortoluron chlorination by-products were identified by gas chromatography-mass spectrometry (GC-MS) with purge-and-trap pretreatment, ultra-performance liquid chromatography-electrospray ionization-MS and GC-electron capture detector. Six volatile disinfection by-products were identified including chloroform (CF), dichloroacetonitrile, 1,1-dichloropropanone, 1,1,1-trichloropropanone, dichloronitromethane and trichloronitromethane. Degradation pathways of chlortoluron chlorination were then proposed. High concentrations of CF were generated during chlortoluron chlorination, with maximum CF yield at circumneutral pH range in solution.