餐厨垃圾厌氧处理“碳中和”综合效益评价

为综合评估餐厨垃圾厌氧处理的环境影响与效益,对某餐厨垃圾厌氧处理工艺及其技术单元进行生命周期环境影响评价,并建立“碳中和”计算模型预测与验证实际碳排及耗能情况,综合“环境影响-碳排耗能-经济效益-社会效益”对实际案例进行评估.结果表明,沼肥加工和沼气提纯技术单元分别造成39%和59%总环境影响.另外,粗油提炼、沼气提纯以生物基产品回收形式大幅度削减碳排,分别占理论碳削减的9.7%和54.7%.餐厨垃圾处理厂需通过增加系统稳定性、完善气体监测体系、提高技术处理效率和优化设备额外耗能情况等方式,以减少理论与实际碳排能耗偏差.经综合评价,该餐厨垃圾处理厂模式具备实现“负碳”潜力,其工艺推广具有未来前景.     

Review on recent progress in on-line monitoring technology for atmospheric pollution source emissions in China

Emissions from mobile sources and stationary sources contribute to atmospheric pollution in China, and its components, which include ultrafine particles (UFPs), volatile organic compounds (VOCs), and other reactive gases, such as NH₃ and NO_x, are the most harmful to human health. China has released various regulations and standards to address pollution from mobile and stationary sources. Thus, it is urgent to develop online monitoring technology for atmospheric pollution source emissions. This study provides an overview of the main progress in mobile and stationary source monitoring technology in China and describes the comprehensive application of some typical instruments in vital areas in recent years. These instruments have been applied to monitor emissions from motor vehicles, ships, airports, the chemical industry, and electric power generation. Not only has the level of atmospheric environment monitoring technology and equipment been improving, but relevant regulations and standards have also been constantly updated. Meanwhile, the developed instruments can provide scientific assistance for the successful implementation of regulations. According to the potential problem areas in atmospheric pollution in China, some research hotspots and future trends of atmospheric online monitoring technology are summarized. Furthermore, more advanced atmospheric online monitoring technology will contribute to a comprehensive understanding of atmospheric pollution and improve environmental monitoring capacity.     

邢台市区道路可悬浮灰尘重金属污染特征及来源识别

为探究工业企业转型城市的道路可悬浮灰尘中重金属的来源特征,在邢台市区采集50份道路灰尘样品,利用X-Ray荧光光谱仪测定可悬浮灰尘中Cr、 Mn、 Co、 Ni、 Cu、 Zn、 As和Pb的含量,采用富集因子法评价重金属的污染水平,利用相关分析、主成分分析和聚类分析判别重金属之间的关系,识别其可能来源.结果表明,Co、 Cu、 Zn和Pb的平均含量是其相应河北省土壤背景值的2倍以上.富集因子评价结果显示,邢台市道路可悬浮灰尘中Co、 Cu、 Zn和Pb整体呈现中度富集,Ni、 As、 Cr和Mn无富集或轻微富集.综合样品中各重金属元素的含量特征与多元统计分析结果,邢台市区道路可悬浮灰尘中Cr、 Mn和Ni主要来源于自然和工业混合源,Zn、 Pb和Cu来源于交通和燃煤源,As来源于自然源,Co主要受工业活动的影响.     

A signal-amplified whole-cell biosensor for sensitive detection of Hg2+ based on Hg2+-enhanced reporter module

A signal-amplified mercury sensing biosensor with desired sensitivity was developed through firstly using the GFP mutant with fluorescence increasing response towards Hg²⁺ as the reporter module.The developed biosensor showed response for Hg²⁺ in a relatively wide range of 1–10,000 nmol/L,and the detection limit was improved one or two orders of magnitude in comparison with most metal-sensing biosensors in similar constructs.In addition,the biosensor could distinguish Hg     

Preparation of Ti species coating hydrotalcite by chemical vapor deposition for photodegradation of azo dye

TiO_2 in anatase crystal phase is a very effective catalyst in the photocatalytic oxidation of organic compounds in water. To improve its photocatalytic activity, the Ti-coating Mg Al hydrotalcite(Ti–Mg Al–LDH) was prepared by chemical vapor deposition(CVD) method.Response surface method(RSM) was employed to evaluate the effect of Ti species coating parameters on the photocatalytic activity, which was found to be affected by the furnace temperature, N2 flow rate and influx time of precursor gas. Application of RSM successfully increased the photocatalytic efficiency of the Ti–Mg Al–LDH in methylene blue photodegradation under UV irradiation, leading to improved economy of the process.According to the results from X-ray diffraction, scanning electron microscopy, Brunner–Emmet–Teller and Barrett–Joyner–Hallender, thermogravimetric and differential thermal analysis, UV–vis diffuse reflectance spectra analyses, the Ti species(TiO_2or/and Ti~(4+)) were successfully coated on the Mg Al–LDH matrix. The Ti species on the surface of the Ti–Mg Al–LDH lead to a higher photocatalytic performance than commercial TiO_2-P25. The results suggested that CVD method provided a new approach for the industrial preparation of Ti-coating Mg Al–LDH material with good photocatalytic performances.     

垃圾填埋有色溶解性有机质与铜络合机制

为了阐明填埋场中重金属的形态演变机制,采用三维荧光光谱、荧光猝灭滴定技术及平行因子分析,研究了不同填埋年限垃圾中有色溶解性有机物(colored dissolved organic matter,CDOM)与Cu(Ⅱ)的络合过程.结果表明,填埋垃圾CDOM中含有类蛋白、类富里酸及类胡敏酸物质,随着填埋时间的延伸,类蛋白物质含量呈下降趋势,而类富里酸和类胡敏酸含量呈上升趋势.填埋垃圾CDOM中类蛋白物质对Cu(Ⅱ)络合能力和参与络合的荧光基团比例存在差异,络合的条件稳定常数在4.00~5.75之间,参与络合的荧光基团比例在22.78%~95.30%之间;而类腐殖质与Cu(Ⅱ)作用的条件稳定常数和参与络合的荧光基团比例变化较小,类胡敏酸物质与Cu(Ⅱ)络合的条件稳定常数在4.71~5.54之间,参与络合的荧光基团比例在42.35%~61.46%之间,类富里酸物质与Cu(Ⅱ)络合的条件稳定常数在4.44~5.25之间,参与络合的荧光基团比例在46.14%~57.22%之间.类富里酸和类胡敏酸与Cu(Ⅱ)的结合能力都随着填埋年限的增加而降低,但参与络合的荧光基团比例增加,并且类胡敏酸物质与重金属的结合能力强于类富里酸,但参与配位的官能团较类富里酸少.     

关于建设项目生态补偿的思考

作为一种解决环境保护与经济社会发展矛盾的重要经济手段,生态补偿越来越受到人们关注。建设项目生态补偿是生态补偿的一个重要领域,但相对于其他领域而言,理论和实践研究均相对较少。结合实际案例研究,文章初次提出了建设项目生态补偿概念、原则及应注意的问题。最后,建议加强两方面研究,建设项目生态补偿内涵和范畴确定;建设项目生态补偿方式及标准确定。     

邯郸市大气PM_(2.5)成分空间分布研究

为研究邯郸市2015年PM_(2.5)的污染状况,采用河北工程大学监测站全年PM_(2.5)浓度和气象在线监测数据以及4个代表月4个站点离线采样成分数据,分析了PM_(2.5)的浓度水平与气象要素的关系以及其化学组分特征。结果表明:PM_(2.5)的年均浓度为91.14μg/m~3,最高达到706.56μg/m~3;不同相对湿度条件下,PM_(2.5)浓度对邯郸地区能见度有较大影响。此外,邯郸静风频率较大,全年东南风风速较小,PM_(2.5)污染相对更加严重;PM_(2.5)中主要化学成分为SO_4~(2-)、NO_3~-和NH_4~+、OC和EC,4个站点采样无显著差异性。     

在氧化沟中构建微生物燃料电池

在氧化沟中构建了微生物燃料电池,经测定微生物燃料电池电压为0.24～0.39 V,均值为0.29 V.经计算该微生物燃料电池的产电功率为0.05～0.15 mW,均值为0.08 mW.构建了微生物燃料电池的氧化沟COD去除率为75％～ 90％,TN去除率为5％～38％;无微生物燃料电池的氧化沟COD去除率为77％～89％,TN去除率为5％～23％.构建微生物燃料电池后能减少氧化沟内外沟中污泥的增加量,约减少15％.     

Ecological utilization of leather tannery waste with circular economy model

Circular economy (CE) focuses on resource-productivity and eco-efficiency improvement in a comprehensive way, especially on the industrial structure optimization of new technology development and application, equipment renewal and management renovation. The leather industry on the one side boosts the local economic development, on the other side however leads to the tremendous environment pollution and biological chains destruction. The CE model has been implemented as a new way of raw materials, water and energy consumption reduction in the leather industry. Reduce, Reuse, Recycle and Recover of the tannery effluents have been discussed in detail according to the different operation processes. The successful treatment approaches with analysis in the aspects such as wastewater, solid waste, sulfide, Chemical Oxygen Demand (COD), ammonium salt, chloride and chrome of the leather tannery with CE model provide guidance for the sustainable development of leather industry in the future.