废纸造纸废水结垢原因及防治对策研究

针对无锡某废纸造纸企业产生的污水经厌氧-好氧-化学混凝处理后,出水在放流池产生结垢现状,对各段污水中主要离子浓度进行跟踪分析,并对结垢的组分、结垢原因、机理和防治结垢对策进行了探讨。结果表明:垢样的主要成分为CaCO3;污水中含有较高浓度的钙离子和碳酸氢根离子是导致结垢的主要原因,较高的水温、pH值、流速、流动状态、池壁的粗糙程度以及PAC的投加对结垢也有一定的影响;最佳防治对策为使用Ca(OH)2+PAM代替PAC+PAM混凝,保证COD达标排放同时,也解决了出水结垢问题。     

工业废水中多金属离子的吸附净化

以含有Si、Al、Ca、C元素的矿物材料作为基质,经特定条件处理后造粒成型加工成轻质多孔Si-Al-Ca-C结构的吸附材料。研究了该吸附材料对工业废水中多种金属离子的吸附性能,探讨了影响吸附性能的因素。研究结果表明,在一定条件下,Si-Al-Ca-C吸附材料对工业废水中Al3+、Ca2+、Mn2+、Cu2+、Fe3+、Mg2+、As3+和Zn2+的净化率分别高达99.34%、99.82%、98.26%、98.16%、97.76%、97.01%、100%和89.09%。金属离子残留浓度分别为0.152、0.07、0.012、0.02、0.119、0.311、0和0.259 mg/L,均低于国家污水综合排放标准(GB8978-1996)一级标准。     

滇池流域水资源综合平衡管理研究

随着滇池治理的进展,在今后一个时期内,恢复滇池饮用水环境功能,成为滇池治理的首要目标和任务。围绕滇池流域水资源供求平衡,采用水资源全要素配置框架下的三次平衡分析理论,从整体上分析了滇池流域水资源供求平衡关系及存在的主要问题,提出了以需求为导向,建立滇池流域水资源综合平衡管理目标和措施。分析表明：在滇池治理的基础上,通过建立滇池流域水资源综合平衡管理体系,落实管理措施,从总量平衡的理论上能够充分发挥引水工程的作用,恢复滇池饮用水环境功能,实现水量、水质供求的综合平衡。建议进一步开展量化分析和模拟实验研究,为在滇池流域实施综合平衡管理提供可靠依据和建议     

Authentication of emission monitoring data and optimization of desulfurization in the molybdenum roasting process based on BAT-OOPN and the response surface method

Environmental Science and Pollution Research - This paper presents a quantitative pollutant discharge model for a typical molybdenum roasting plant, which combines the best available technology and...     

Contextual and organizational factors in sustainable supply chain decision making: grey relational analysis and interpretative structural modeling

Environment, Development and Sustainability - Sustainable supply chain emerges as a major business trend essential to long-term competitive advantage. Relevant corporate decisions concern a broad...     

Thermal conversion of rice husks and sawdust to liquid fuel

The paper focuses on studying the conversion of rice husks and sawdust into liquid fuel. Rice husks, sawdust and their mixture are pyrolyzed at temperatures between 420 and 540 degrees C, and the main product of liquid fuel is obtained. The experimental result shows that the yield of liquid fuel depends on various factors such as feedstock and temperature. The maximum yields for rice husks, sawdust and their mixture are 56%, 61% and 60% at 465, 490 and 475 degrees C, respectively. Analyses with GC-MS and other apparatus show that the liquid fuel is a complicated compound with low caloric value and can be directly used as a fuel oil for combustion in a boiler or a furnace without any upgrading. Alternatively, the fuel can be refined to be used by vehicles.     

CO2资源化利用的现状及前景

介绍了CO2分离捕集最新工艺——电化学法、膜法、化学循环燃烧法的研究进展。评述分析了CO2的各种资源化应用前景：CO2气体用作生物碳源、辅助注射成型剂及有机物（如氨基甲酸酯、表面活性剂）合成原料等;液态CO2用于人造金刚石、热泵干燥、超临界CO2萃取及固体干冰冷喷射清洗等。CO2作为一种潜在的丰富碳源,应不断研发其新的应用领域,加快其工业化应用。     

Enhanced arsenate removal from aqueous solution by Mn-doped MgAl-layered double hydroxides

Environmental Science and Pollution Research - In this study, Mn-doped MgAl-layered double hydroxides (LDHs) were successfully synthesized for efficient removal arsenate from aqueous solution. The...     

伞罩型湿式脱硫除尘塔入口结构优化模拟

利用商用CFD软件Fluent,采用k-ε湍流模型和SIMPLE算法,对新型伞罩型湿式脱硫除尘塔内的三维两相流场进行数值模拟,发现了塔内烟气入口处流场所存在的不均匀性。为将其流场调节均匀从而提高脱硫除尘效率,在数值模拟的基础上提出在入口处加装直导流板、阶梯导流板和弯曲导流板,并分析塔内y=0截面速度的分布,以及z＝0.21 m截面上的颗粒浓度、速度和压力等参数的分布。结果表明：通过加装阶梯导流板和弯曲导流板均可以将流场调节均匀,达到较理想状态,从而实现高效净化气体的目的。模拟结果对设备的优化设计和实际运行有一定的指导作用。     

污水污泥裂解及其性能的研究

以碘吸附值为裂解残渣吸附性能的指标,通过单因素实验和正交实验,确定了制备裂解残渣的最佳工艺条件,并对残渣的表面元素组成、孔结构组成、晶相组成和吸附性能等性质进行了表征。结果显示：以浓度均为5 mol/L的ZnCl₂和H₂SO₄作活化剂、复配比2∶1、活化温度600℃、活化时间1 h、固液比1∶2.5,制得的裂解残渣酸洗后碘值平均值可达892.8 mg/g;用制备的裂解残渣对苯酚废水进行处理,室温下振荡5 min,苯酚去除率即可达到87.9%,且符合Langmuir吸附等温线方程和Freundlich吸附等温线方程。