Influence of mercury from fly ash on cattle reared nearby thermal power plant

Cattle grazing nearby coal-fired power stations are exposed to fly ash. The present investigation aims to assess the environmental and health impacts of fly ash containing mercury emitted from thermal power plant. The health effect of fly ash were studied using 20 lactating cattle reared within a 5-km radius of s thermal power plant for the possible effect of fly ash such as the alterations in hematological and biochemical parameters of blood, milk, and urine. Results indicated that the hemoglobin levels (6.65?±?0.40?g/dl) were significantly reduced in all the exposed animals. Biochemical parameters viz., blood urea nitrogen (27.35?±?1.19?mg/dl), serum glutamate oxaloacetate transaminase (43.39?±?3.08?IU/l), albumin, and creatinine were found to be increased, whereas serum glutamate pyruvic transaminase (29.26?±?2.02) and Ca²⁺ were observed to be statistically insignificant in exposed animals. Mercury concentrations estimated in the blood, milk, and urine of exposed (n?=?20) and control (n?=?20) animals were 7.41?±?0.86, 4.75?±?0.57, 2.08?±?0.18, and 1.05?±?0.07, 0.54?±?0.03, 0.20?±?0.02?μg/kg, respectively. The significant increase (P?<?0.01) in the levels of mercury in blood, milk, and urine of exposed animals in comparison to control indicated that the alterations of biochemical parameters in exposed cattle could be due to their long term exposure to fly ash mercury which may have direct or indirect impact on human populations via food chain.     

Mapping aboveground woody biomass using forest inventory,remote sensing and geostatistical techniques

Mapping forest biomass is fundamental for estimating CO₂ emissions, and planning and monitoring of forests and ecosystem productivity. The present study attempted to map aboveground woody biomass (AGWB) integrating forest inventory, remote sensing and geostatistical techniques, viz., direct radiometric relationships (DRR), k-nearest neighbours (k-NN) and cokriging (CoK) and to evaluate their accuracy. A part of the Timli Forest Range of Kalsi Soil and Water Conservation Division, Uttarakhand, India was selected for the present study. Stratified random sampling was used to collect biophysical data from 36 sample plots of 0.1 ha (31.62 m?×?31.62 m) size. Species-specific volumetric equations were used for calculating volume and multiplied by specific gravity to get biomass. Three forest-type density classes, viz. 10–40, 40–70 and >70 % of Shorea robusta forest and four non-forest classes were delineated using on-screen visual interpretation of IRS P6 LISS-III data of December 2012. The volume in different strata of forest-type density ranged from 189.84 to 484.36 m³ ha^?1. The total growing stock of the forest was found to be 2,024,652.88 m³. The AGWB ranged from 143 to 421 Mgha^?1. Spectral bands and vegetation indices were used as independent variables and biomass as dependent variable for DRR, k-NN and CoK. After validation and comparison, k-NN method of Mahalanobis distance (root mean square error (RMSE)?=?42.25 Mgha^?1) was found to be the best method followed by fuzzy distance and Euclidean distance with RMSE of 44.23 and 45.13 Mgha^?1 respectively. DRR was found to be the least accurate method with RMSE of 67.17 Mgha^?1. The study highlighted the potential of integrating of forest inventory, remote sensing and geostatistical techniques for forest biomass mapping.     

Synthesis,characterization, and systematic studies of a novel aluminum selective chelating resin

A procedure is detailed for the selective analysis of trace aluminum by flame atomic absorption spectrophotometer coupled with off-line column separation and preconcentration. Chelating resin was synthesized by covalent functionalization of Amberlite XAD-16 by 2-(2-hydroxyphenyl) benzoxazole. The modified resin was characterized using FT-IR spectroscopy, energy dispersive x-ray analysis, elemental analysis, thermogravimetric analysis/differential thermal analysis, and minimum energy run. The optimum sorption was at pH 9?±?0.1 with corresponding t _1/2 of only 7 min. Many competitive anions and cations studied did not interfere at all in the selective determination of Al(III), at the optimized conditions. The resin shows maximum sorption capacity of 21.58 mg g^?1 and can be regenerated up to 75 cycles without any discernible capacity loss. The Langmuir isotherm model provides the better correlation of the experimental data (r ²?=?0.999) in comparison to Freundlich isotherm model, while the Scatchard analysis revealed homogeneous binding sites in the chelating resin. Analytical figures of merit were evaluated by accuracy (standard reference materials and recovery experiment), precision (RSD <5 %), and detection limit (2.8 μg L^?1). The applicability was demonstrated by analysis of trace aluminum in biological, environmental, and food samples.     

Hexavalent chromium reduction and plant growth promotion by Staphylococcusarlettae strain Cr11

Cr(VI), a mutagenic and carcinogenic pollutant in industrial effluents, was effectively reduced by an indigenous tannery effluent isolate Staphylococcus arlettae strain Cr11 under aerobic conditions. The isolate could tolerate Cr(VI) up to 2000 and 5000 mg L⁻¹ in liquid and solid media respectively. S. arlettae Cr11 effectively reduced 98% of 100 mg L⁻¹ Cr(VI) in 24 h. Reduction for initial Cr(VI) concentrations of 500 and 1000 mg L⁻¹ was 98% and 75%, respectively in 120 h. The isolate was also positive for siderophore, indole acetic acid, ammonia and catalase production, phosphate solubilization and biofilm formation in the presence and absence of Cr(VI). The isolate showed halotolerance (10% NaCl) and cross tolerance to other toxic heavy metals such as Hg²⁺, Ni²⁺, Cd²⁺ and Pb²⁺. Bacterial inoculation of Triticum aestivum in controlled petri dish and soil environment showed significant increase in percent germination, root and shoot length as well as dry and wet weight in Cr(VI) treated and untreated samples. This is the first report of simultaneous Cr(VI) reduction and plant growth promotion for a S. arlettae strain.     

Concentration and recovery of coliphages from water with bituminous coal.

Coliphages represent a process indicator for fecal pollution. The coal bed concentration method prepared for enterovirus was refined for a concentration of coliphages. A bed made from 1.5 g of 120-mesh coal powder was used for concentrating coliphage from 200 mL of a water sample with or without the addition of aluminum chloride at different pH values. The isolated E. coli strain EC-R8 was found to be more susceptible to the desired coliphage and showed significant coliphage-coliform response, with clear plaque used for further studies. The complete coliphage adsorption was achieved with the addition of 0.0005 M AlCl3 at pH 6.0. Adsorbed coliphages were eluted with 3% beef extract in Mcllvaine buffer at pH 7.1, with an average recovery of 78.74%. This concentration technique was applied for the detection of coliphages from the well water of Nagpur city (India) and found to contain coliphages in the range of 2 to 28 plaque-forming units per liter (PFU/L).     

Coupling between meteorological factors and ambient aerosol load

The coarser (CPM) and respirable (RPM) fractions of aerosol loads collected in a time sequence, during the onset of winter season in Delhi region, were subjected to Principal Component Analysis (15 elemental variables, 39 samples); the absolute mass contributed by each identified source to the CPM and RPM was quantified by using Absolute Principal Component Score (APCS) and Positive Matrix Factorization (PMF) method. Interestingly, the mass contributed by the local crustal source (material) to both fractions manifested undulating periodic behavior, a dominating harmonic corresponding to 24-h period was detected by using Discrete Fourier Transform (DFT). The corresponding harmonics, of varying strengths, were also detected in the recorded meteorological factors: Planetary Boundary Layer (PBL), Surface Level Temperature (T), Surface Level Relative Humidity (RH) and Wind Speed (WS). The analysis of the respective harmonic strength within the CPM, RPM, and meteorological factors suggested that the undulation observed in both size fractions of aerosol load from the local crust was affected by the meteorological factors. The large proportion of undulating loads (CPM and RPM), explained by the dominating harmonic, was fully accounted for by the empirical relation involving the discrete coupling parameters, and the recorded meteorological factors: PBL, T, RH and WS. The analysis suggests that the magnitude and the direction (‘positive’ load increase and ‘negative’ the reverse) of coupled meteorological factors'(s) effect on ambient CPM, RPM load is determined by the phase difference between the harmonic explaining the aerosol fraction's load and the corresponding harmonic present in the respective meteorological factor. The absolute mass contributions arising from the identified sources (APCS and PMF) allowed us to calculate the baseline ambient concentrations of undulating CPM and RPM loads, in the region of this study, affected by meteorological factors only.     

Enrichment of vermicomposts prepared from cow dung spiked solid textile mill sludge using nitrogen fixing and phosphate solubilizing bacteria

Textile mill waste can be vermicomposted if it is mixed in the range of 20–30% with cow dung. This article reports the effect of inoculation, of nitrogen fixing Azotobacter chroococcum strain; Azospirillum brasilense strain and phosphate solubilizing Pseudomonas maltophila, on nitrogen and phosphorus content of vermicomposts prepared from cow dung (CD) and cow dung spiked textile mill sludge (CD + STMS). The CD vermicompost was more supportive to the growth and multiplication of all the three bacteria than CD + STMS vermicompost. In Azotobacter chroococcum treated vermicomposts maximum nitrogen content was recorded between 45 and 60 days [CD␣vermicompost (25.9 ± 0.45 g kg⁻¹) and CD + STMS vermicompost (20.6 ± 0.62 g kg⁻¹)] followed by Azospirillum brasilense inoculation [CD vermicompost (19.4 ± 0.60 g kg⁻¹) and CD + STMS vermicompost (18.6 ± 0.17 g kg⁻¹)]. Phosphorus content in Pseudomonas maltophila inoculated CD vermicompost was 20.8 ± 0.20 g kg⁻¹ and CD + STMS vermicompost was 13.4 ± 0.45 g kg⁻¹ after 75th day of inoculation.     

Catalytic effect on hydrogen de/absorption properties of MgH2 − x wt% MM (x = 0, 10, 20, 30) nanomaterials

Environmental Science and Pollution Research - Reversible hydrogen storage in MgH2 under specified conditions is a possible way for the positive reception of hydrogen economy, in which the...     

Coastal flood management in rural planning unit through land-use planning: Kaikhali, West Bengal, India

The Indian subcontinent is highly prone to the detrimental impacts of hazards viz. cyclones, floods and storm surges. Of late, these events have become extreme in nature and intensity. While occurrence and severity of the events is being linked to the phenomenon of climate change, their devastating potentialities are also getting triggered due to lack of resilience and coping capacity of the human community. That in turn depends on distribution of activities over the land i.e. land use pattern, affecting the socio -economic conditions directly. A coastal village often lacks infrastructural support, administrative attention and planning standards compared to a coastal city, thereby making it more vulnerable to disasters like flood. In a coastal city it is easy to govern and manage livelihood as land use depends highly on anthropogenic decisions. While in a coastal village, activities would highly depend on its natural characteristics viz. coastal geomorphology, soil, vegetation cover i.e. governance of livelihood by the eco-system. Hence, managing disaster through in-situ pro-active or developmental measures in a rural planning unit though imperative, is a challenging task. This paper focuses on spatial planning techniques for Restoration of ecological buffers and livelihood enhancement that would sustainably combat the impact of flood at village level in a coastal area. Geographic Information System (GIS) and Remote Sensing (RS) techniques have been used extensively in this study as application tools.     

Tracing the geographic origin of traded leopard body parts in the indian subcontinent with DNA‐based assignment tests

Illicit trade in wildlife products is rapidly decimating many species across the globe. Such trade is often underestimated for wide‐ranging species until it is too late for the survival of their remaining populations. Policing this trade could be vastly improved if one could reliably determine geographic origins of illegal wildlife products and identify areas where greater enforcement is needed. Using DNA‐based assignment tests (i.e., samples are assigned to geographic locations), we addressed these factors for leopards (Panthera pardus) on the Indian subcontinent. We created geography‐specific allele frequencies from a genetic reference database of 173 leopards across India to infer geographic origins of DNA samples from 40 seized leopard skins. Sensitivity analyses of samples of known geographic origins and assignments of seized skins demonstrated robust assignments for Indian leopards. We found that confiscated pelts seized in small numbers were not necessarily from local leopards. The geographic footprint of large seizures appeared to be bigger than the cumulative footprint of several smaller seizures, indicating widespread leopard poaching across the subcontinent. Our seized samples had male‐biased sex ratios, especially the large seizures. From multiple seized sample assignments, we identified central India as a poaching hotspot for leopards. The techniques we applied can be used to identify origins of seized illegal wildlife products and trade routes at the subcontinent scale and beyond.