Conversion of Mixed Low-Density Polyethylene Wastes into Liquid Fuel by Novel CaO/SiO<Subscript>2</Subscript> Catalyst

Plastic wastes disposal can be done by various methods such as landfill, incineration, mechanical and chemical recycling but these are restricted due to some environmental, economic and political problems. Conversion of these plastic wastes into valuable products by degradation is the best option. In the present work waste low density polyethylene was degraded by catalytic process using CaO/SiO₂ as mixed catalyst. The conditions for catalytic degradation were optimized for the production of maximum liquid fuel. It was found that the yield of liquid product was up to 69.10 wt% at optimum condition of temperature (350 °C), time (90 min) and catalyst feed ratio (1:0.4). Liquid fuels obtained from the catalytic degradation were further separated into various fractions by fractional distillation. Composition of liquid fuels was analyzed by FTIR spectroscopy, which showed that the liquid fuels mostly consist of paraffinic and naphthenic hydrocarbons. Different fuel properties such as density, specific gravity, American petroleum institute gravity (API gravity), viscosity, kinematic viscosity, refractive index, refractive intercept and flash point of both the parents and various fractional fuels were determined. All the properties of the obtained fuels are in close agreement with the fuel properties of gasoline, kerosene and diesel. It was found that our catalyst is very much efficient in terms of time, degradation temperature and amount of catalyst.     

Photocatalytic degradation of ciprofloxacin in aqueous media: a short review

The frequent detection of antibiotics such as ciprofloxacin in surface and drinking waters around the world has attracted concern from various researchers. Such presence is an indication that the decontamination of water polluted by antibiotics is beyond the conventional treatment methods. However, among the different treatment methods that have been developed in the area of water purification, heterogeneous photocatalysis using semiconductor as a mediator has been rated as an efficient and a green wastewater treatment method. This is because, the process is effective in degrading and mineralizing organic pollutants, using UV or visible light. The present review paper covers a brief survey over a range of publications in the last decade, involving photocatalytic materials that have been employed in the purification of water contaminated by ciprofloxacin.     

A review of global outlook on fluoride contamination in groundwater with prominence on the Pakistan current situation

Several million people are exposed to fluoride (F^?) via drinking water in the world. Current review emphasized the elevated level of fluoride concentrations in the groundwater and associated potential health risk globally with a special focus on Pakistan. Millions of people are deeply dependent on groundwater from different countries of the world encompassing with an elevated level of fluoride. The latest estimates suggest that around 200 million people, from among 25 nations the world over, are under the dreadful fate of fluorosis. India and China, the two most populous countries of the world, are the worst affected. In Pakistan, fluoride data of 29 major cities are reviewed and 34% of the cities show fluoride levels with a mean value greater than 1.5 mg/L where Lahore, Quetta and Tehsil Mailsi are having the maximum values of 23.60, 24.48, > 5.5 mg/L, respectively. In recent years, however, other countries have minimized, even eliminated its use due to health issues. High concentration of fluoride for extended time period causes adverse effects of health such as skin lesions, discoloration, cardiovascular disorders, dental fluorosis and crippling skeletal fluorosis. This review deliberates comprehensive strategy of drinking water quality in the global scenario of fluoride contamination, especially in Pakistan with prominence on major pollutants, mitigation technologies, sources of pollution and ensuing health problems. Considering these verities, health authorities urgently need to establish alternative means of water decontamination in order to prevent associated health problems.     

Free radical-assisted electrocoagulation processes for wastewater treatment

The combination of electrocoagulation with another process is a promising approach to enhance the removal efficiency of water pollutants. For instance, free radical-assisted electrocoagulation is a new combination showing higher performance. There are different combinations depending on the free radical source. This article reviews free radical-assisted electrocoagulation processes. We discuss electrocoagulation mechanisms; ozone-assisted electrocoagulation processes; advanced oxidation-assisted electrocoagulation processes; and ultrasound-assisted electrocoagulation. We present kinetic models used in free radical-assisted electrocoagulation, scale-up of free radical-assisted electrocoagulation and cost estimation. The major points are: most of the available studies have been done at laboratory scale with synthetic wastewater, and lack holistic and systematic approaches to consider the process complexity. The performance of the combined process is improved, and the removal efficiency is increased especially with ozone-assisted electrocoagulation, which gives a removal efficiency of more than 95%. The use of ultrasound energy with electrocoagulation is advantageous in reducing the problem of electrode passivation.     

Challenges to promoting eco-industry parks in Malaysia: A case study of Rawang Integrated Industrial Park

Journal of Material Cycles and Waste Management - Malaysia is a developing country, and its economic growth has caused the increase in the generation of industrial waste in terms of its volume. The...     

Occupational Cognitive Failures and Safety Performance in the Workplace

Introduction. The majority of industrial accidents occur because of human errors. Human error has different causes, however, in all cases cognitive abilities and limitations of human play an important role. Occupational cognitive failures are cognitively-based human errors that occur at work. The aim of this study was to examine the relationship between occupational cognitive failures and safety consequences. Method. Personnel of a large industrial company in Iran filled out an occupational cognitive failure questionnaire (OCFQ) and answered questions on accidents. Univariate and multiple logistic regression analysis were used to determine the relationship between cognitive failures and safety consequences. Results. According to developed regression models, personnel with a high rate of cognitive failure, in comparison to low rate, have a high risk of minor injury involvement (OR 5.1, 95% CI [2.62, 10.3]); similar results were for major injury and near miss. Discussion. The results of this study revealed usefulness of the OCFQ as a tool of predicting safety-related consequences and planning preventive actions.     

Technological trends in nanosilica synthesis and utilization in advanced treatment of water and wastewater

Environmental Science and Pollution Research - Water and wastewater treatment applications stand to benefit immensely from the design and development of new materials based on silica nanoparticles...     

A review of antibiotic removal from domestic wastewater using the activated sludge process: removal routes,kinetics and operational parameters

Environmental Science and Pollution Research - Many advanced technologies have shown encouraging results in removing antibiotics from domestic wastewater. However, as activated sludge treatment is...     

Hand-arm vibration disorder among grass-cutter workers in Malaysia

Introduction. Prolonged exposure to hand-transmitted vibration from grass-cutting machines has been associated with increasing occurrences of symptoms and signs of occupational diseases related to hand–arm vibration syndrome (HAVS). Methods. A cross-sectional study was carried out using an adopted HAVS questionnaire on hand–arm vibration exposure and symptoms distributed to 168 male workers from the grass and turf maintenance industry who use hand-held grass-cutting machines as part of their work. The prevalence ratio and symptom correlation to HAVS between high and low–moderate exposure risk groups were evaluated. Results. There were positive HAVS symptoms relationships between the low–moderate exposure group and the high exposure group among hand-held grass-cutting workers. The prevalence ratio was considered high because there were indicators that fingers turned white and felt numb, 3.63, 95% CI [1.41, 9.39] and 4.24, 95% CI [2.18, 8.27], respectively. Less than 14.3% of workers stated that they were aware of the occupational hand–arm vibration, and it seemed to be related to the finger blanching and numbness. Conclusion. The results suggest that HAVS is under-diagnosed in Malaysia, especially in the agricultural sectors. More information related to safety and health awareness programmes for HAVS exposure is required among hand-held grass-cutting workers.