Modeling and simulation of industrial water demand of Beijing municipality in China

Statistic and econometric regression models were established in this study to analyze and predict industrial water demand, water deficits, and their future uncertainty in Beijing—a Chinese city with a severe water stress problem. A forecasting model was selected based on a modeling evaluation by comparing predictions with observations. Four scenarios were designed to simulate and analyze the future uncertainty of industrial water demand and the water deficit of Beijing. The modeling results for industrial water demand suggested that Beijing industry would face a water deficit between 3.06 × 10⁸ m³ in 2008 and 2.77×10⁸ m³ in 2015, though its industrial water demand would decrease from 6.31×10⁸ m³ to 4.84 ×10⁸ m³ during this period of time. Results from simulated scenario illustrated that, due to the extreme water scarcity situation, industry in Beijing would still face a serious water deficit problem even with a very optimistic scenario for the future.     

Potential of microalgae Bio-Coke as a sustainable solid fuel alternative to coal coke

Energy and environmental issues have triggered the search for new sources of green energy alternatives in recent years. Biofuel production from renewable sources is widely considered one of the most sustainable alternatives for environmental and economic sustainability. Microalgae are currently being promoted as one of the most promising liquid biofuel feedstocks due to their rapid growth, high lipid production capacity, and carbon–neutral cycle. In this study, whole microalgae cells were utilized as raw material to produce solid biofuel, i.e., Bio-Coke, and this study aimed to investigate the possibility of microalgae Bio-Coke as an alternative to coal coke. The results show that Bio-Coke can be produced from microalgae in the temperature range of 80–100 °C. The apparent density is between 1.253 and 1.261 g/cm³, comparable to the apparent density of lignocellulosic Bio-Coke. Additionally, the calorific value is higher than the calorific value of lignocellulosic Bio-Coke and within the range of the calorific value of subbituminous coal. Therefore, microalgae Bio-Coke can be utilized to replace coal coke usage in the future.

     

Investigating effect of proton-exchange membrane on new air-cathode single-chamber microbial fuel cell configuration for bioenergy recovery from Azorubine dye degradation

Environmental Science and Pollution Research - One of the biggest challenges of using single-chamber microbial fuel cells (MFCs) that utilize proton-exchange membrane (PEM) air cathode for...     

Preparation of Liquid Epoxidized Natural Rubber by Oxidative Degradations Using Periodic Acid,Potassium Permanganate and UV-Irradiation

Epoxidized natural rubber (ENR) needs to be degraded into shorter chain lengths, to form liquid epoxidized natural rubber (LENR), for applications such as coating and adhesives. Since ENR contains both C=C and epoxide groups as reactive sites for degradation reactions, thus, LENR could be prepared by different methods through cleavages of C=C or epoxide groups, or a combination of both sites. Different mechanisms would produce different terminals on the LENR. This paper reports the oxidative degradation by (a) periodic acid, (b) potassium permanganate and (c) ultra violet (UV) irradiation. The degraded rubbers were characterized by gel permeation chromatography (GPC), nuclear magnetic resonance (NMR) and Fourier transform infra-red spectroscopy (FTIR). Ester and ketone terminals were formed in all the three methods, but lactone and hydrofuranic structures were observed only in degradation by UV irradiation. NMR spectrum reveals that cyclization of ENR has occurred during degradation by periodic acid. At lower periodic acid concentration, degradation takes place only via C=C cleavage, but at higher concentration, the attack to the epoxide groups becomes more prominent. Potassium permanganate has attacked both the double bonds and epoxide groups. On the other hands, epoxide group was not affected during degradation by UV irradiation, which cleaved only the C=C bonds.     

Reuse of Selected Lignocellulosic and Processed Biomasses as Sustainable Sources for the Fabrication of Nanocellulose via Ni(II)-Catalyzed Hydrolysis Approach: A Comparative Study

This study investigates for the first time the feasibility of isolating nanocellulose from several selected feedstocks via a novel Ni(II)-hydrolysis process, including lignocellulosic biomasses (oil palm trunk, banana peel and coconut husk) and processed biomasses (newspaper, tissue paper and cotton linter), with an obtained gravimetric yield ranging from 59.6 to 86.2%. The isolation of nanocellulose products from these selected feedstocks was verified by the successive removal of most of their non-cellulosic components (lignin and hemicellulose) and cellulose amorphous regions, the increase in the crystallinity index and the nanoscale of the individual crystals. Most importantly, the resultant nanocellulose products rendered better thermal stability than that of corresponding original sources, which are highly potential to be utilized as the new renewable sources of reinforcement materials with potential applications in bio-nanocomposites and thermoplastics. Therefore, this work proves the viability of direct production of nanocellulose from a variety of cellulosic sources by using Ni(II)-based transition metal salt catalyst. The results suggested that the concept of waste to wealth could be well executed from the obtained nanocellulose, which are greatly potential for various industrial applications.     

Developing the first halophytic turfgrasses for the urban landscape from native Arabian desert grass

Environmental Science and Pollution Research - Climate change is occurring and is influencing biological systems through augmented temperatures, more inconstant precipitation, and rising CO2 in the...     

Behaviors of 323Th, 238U, 228Ra and 226Ra on combustion of crude oil terminal sludge

Crude oil terminal sludge contains technologically enhanced naturally occurring radionuclides such as (232)Th, (238)U, (228)Ra and (226)Ra, thus cannot be disposed of freely without proper control. The current method of disposal, such as land farming and storing in plastic drums is not recommended because it will have a long-term impact on the environment. Due to its organic nature, there is a move to treat this sludge by thermal methods such as incineration. This study has been carried out to determine the behaviors of (232)Th, (238)U, (228)Ra and (226)Ra present in the sludge during combustion at a certain temperature and time. The percentage of volatilization was found to vary between 2% and 70%, (238)U was the most volatile in comparison with (232)Th, (228)Ra and (226)Ra. (238)U is found to be significantly volatilized above 500 degrees C, and might reach maximum volatilization at above 700 degrees C. A mathematical model was developed to predict the percentage of volatilization of (232)Th, (238)U, (228)Ra and (226)Ra contained in the sludge. With this known percentage of volatilization, the concentration of (232)Th, (238)U, (228)Ra and (226)Ra present in the bottom and filter ashes can be calculated.     

Physiopathology and effectiveness of therapeutic vaccines against human papillomavirus

Environmental Science and Pollution Research - Human papillomavirus (HPV) is a well-known sexually transmitted disorder globally. Human papillomavirus (HPV) is the 3rd most common cancer that...     

Statistical analysis of PM10 concentrations at different locations in Malaysia

Malaysia has experienced several haze events since the 1980s as a consequence of the transboundary movement of air pollutants emitted from forest fires and open burning activities. Hazy episodes can result from local activities and be categorized as "localized haze". General probability distributions (i.e., gamma and log-normal) were chosen to analyze the PM(10) concentrations data at two different types of locations in Malaysia: industrial (Johor Bahru and Nilai) and residential (Kota Kinabalu and Kuantan). These areas were chosen based on their frequently high PM(10) concentration readings. The best models representing the areas were chosen based on their performance indicator values. The best distributions provided the probability of exceedances and the return period between the actual and predicted concentrations based on the threshold limit given by the Malaysian Ambient Air Quality Guidelines (24-h average of 150 μg/m(3)) for PM(10) concentrations. The short-term prediction for PM(10) exceedances in 14 days was obtained using the autoregressive model.     

Kinetic adsorption of application of carbon nanotubes for Pb（II） removal from aqueous solution

The capability of carbon nanotubes (CNTs) to adsorb lead (Pb) in aqueous solution was investigated. Batch mode adsorption experiment was conducted to determine the effects of pH, agitation speed, CNTs dosage and contact time. The removal of Pb(II) was reach to maximum value 85% or 83% at pH 5 or 40 mg/L of CNTs, respectively. Higher correlation coefficients from Langmuir isotherm model indicates the strong adsorptions of Pb(II) on the surface of CNTs (adsorption capacity Xm = 102.04 mg/g). From this study, the results indicates that the highest percentage removal of Pb (96.03%) can be achieved at pH 5, 40 mg/L of CNTs, contact time 80 min, and agitation speed 50 r/min.