Efficient microwave degradation of humic acids in water using persulfate and activated carbon

Environmental Chemistry Letters - Humic acids are complex mixtures of organic molecules of different sizes, molecular weights and functional groups such as phenols, carboxyls, quinones and amino...     

A novel approach to rapid detection of acute water toxicity and its policy implications for grassroots sustainable environmental monitoring

Unknown chemicals, emerging contaminants, and the resulting reactions among them make early detection and warning of acute water toxicity extremely challenging. The conventional approach using small fish for toxicity monitoring normally requires a designated species of fish and over a week's time to complete, including dilution of the wastewater, a pre-test, and a full test. It often increases chances for error and delays emergency management. This paper reports a novel approach, based on grassroots knowledge and field and lab experience in Jilin, China. This approach uses a combination of different species of aquarium fish to achieve fast and reliable monitoring. It tests the original source water directly without going through the dilution procedure, while paying attention to the time factor. The approach does not require a pre-test and may shorten the time needed for detecting acute toxicity to a few minutes, using a new classification of aquatic toxicity levels. It is inexpensive to use and may be easily adopted by grassroots organizations. The approach is "greener" and more financially and socially sustainable than traditional approaches. The wide use of the approach has the potential to encourage policy innovations for making toxicity monitoring grassroots based and more effective in reducing acute contamination emergencies.     

Accuracy and uncertainty assessment on geostatistical simulation of soil salinity in a coastal farmland using auxiliary variable

Understanding the spatial soil salinity aids farmers and researchers in identifying areas in the field where special management practices are required. Apparent electrical conductivity measured by electromagnetic induction instrument in a fairly quick manner has been widely used to estimate spatial soil salinity. However, methods used for this purpose are mostly a series of interpolation algorithms. In this study, sequential Gaussian simulation (SGS) and sequential Gaussian co-simulation (SGCS) algorithms were applied for assessing the prediction accuracy and uncertainty of soil salinity with apparent electrical conductivity as auxiliary variable. Results showed that the spatial patterns of soil salinity generated by SGS and SGCS algorithms showed consistency with the measured values. The profile distribution of soil salinity was characterized by increasing with depth with medium salinization (EC_e 4–8 dS/m) as the predominant salinization class. SGCS algorithm privileged SGS algorithm with smaller root mean square error according to the generated realizations. In addition, SGCS algorithm had larger proportions of true values falling within probability intervals and narrower range of probability intervals than SGS algorithm. We concluded that SGCS algorithm had better performance in modeling local uncertainty and propagating spatial uncertainty. The inclusion of auxiliary variable contributed to prediction capability and uncertainty modeling when using densely auxiliary variable as the covariate to predict the sparse target variable.     

Occurrence and characterization of selected organochlorine contaminants in outdoor dust collected from Xinxiang,a fast developing city in North China

As facile “environmental media”, the outdoor dust may reflect the changes of contaminants in environment more promptly. In the present study, selected organochlorine contaminants (OCs) include hexachlorocyclohexanes (HCHs), dichlorodiphenyltrichloroethanes (DDTs), hexachlorobenzene (HCB), and pentachlorobenzene (PeCB) were detected in 20 outdoor dust samples collected from Xinxiang City. The concentrations of ΣHCHs, ΣDDTs, HCB, and PeCB in dust were in the range of 0.18–5.05 ng/g dry weight, 0.44–13.50 ng/g dry weight, 0.13–51.61 ng/g dry weight and ND-0.74 ng/g dry weight, respectively. Long-range transport, historical use, and recent impact of impure pesticides might be the main sources of OCs in the outdoor dust. The results of this study indicated that impure pesticide application maybe an important source of DDTs and HCB in the environment.     

Soil surface Hg emission flux in coalfield in Wuda,Inner Mongolia,China

Hg emission flux from various land covers, such as forests, wetlands, and urban areas, have been investigated. China has the largest area of coalfield in the world, but data of Hg flux of coalfields, especially, those with coal fires, are seriously limited. In this study, Hg fluxes of a coalfield were measured using the dynamic flux chamber (DFC) method, coupled with a Lumex multifunctional Hg analyzer RA-915+ (Lumex Ltd., Russia). The results show that the Hg flux in Wuda coalfield ranged from 4 to 318 ng m^?2 h^?1, and the average value for different areas varied, e.g., coal-fire area 99 and 177 ng m^?2 h^?1; no coal-fire area 19 and 32 ng m^?2 h^?1; and backfilling area 53 ng m^?2 h^?1. Hg continued to be emitted from an underground coal seam, even if there were no phenomena, such as vents, cracks, and smog, of coal fire on the soil surface. This phenomenon occurred in all area types, i.e., coal-fire area, no coal-fire area, and backfilling area, which is universal in Wuda coalfield. Considering that many coalfields in northern China are similar to Wuda coalfield, they may be large sources of atmospheric Hg. The correlations of Hg emission flux with influence factors, such as sunlight intensity, soil surface temperature, and atmospheric Hg content, were also investigated for Wuda coalfield.

?

     

Gasification characteristics of biomass for tar removal by secondary oxidant injection

Gasification experiments for sawdust were conducted using a fixed bed reactor at 900 °C by varying the secondary oxidant injection ratio to determine the optimal conditions for tar removal along with the enhancement of gasification efficiency. Secondary oxidant was injected as an oxidant at the top zone of the gasifier in varying ratios of 10–30% of the total amount of oxidant. This method was based on the primary method of tar removal and gasification efficiency improvement by thermal cracking of tar. Various gasification performance parameters were evaluated and tar content was estimated by measuring the fluctuation of weight of the activated carbon filter. The results showed that the concentration of tar in the producer gas decreased by injecting the secondary oxidant, even though syngas yield decreased. The recycling potential of the char produced in the gasification experiments was also assessed with the purpose of utilizing char as an adsorbent by determining its surface area and pore volume. The results demonstrated that the char produced from the gasification experiment had similar quality to that of the activated carbon used in this experiment.     

Formation of persistent chlorinated aromatic compounds in simulated and real fly ash from iron ore sintering

Effects of carbon concentration and Cu additive in simulated fly ash (SFA) and real fly ash (RFA) on the formation of polychlorinated dibenzofurans (PCDFs), polychlorinated dibenzo-p-dioxins (PCDDs), chlorobenzenes, and polychlorinated biphenyls which were all regarded as persistent chlorinated aromatics in iron ore sintering were investigated. In the annealing process of SFA with various carbon contents, the yield of chlorinated aromatics and the I-TEQ obtained their maximum at 10 wt% carbon content. Active carbon in SFA acted as the carbon source as well as an adsorbent which led to higher production of PCDD/F in solid phase at 10 wt% carbon content. The increase of carbon content will be beneficial on the formation of 2,3,7,8-Chloro-substituted PCDF compared with 2,3,7,8-Chloro-substituted PCDD. In addition, the CuCl₂·2H₂O was a much more powerful catalyst in the formation of chlorinated aromatic compounds compared with elementary Cu, since it served as both a catalyst and a chlorine donor. However, the RFA behaved similarly with SFA with elementary Cu in the formation of chlorinated aromatic compounds. The effect of carbon content and copper additives on formation of 2,3,7,8-chloro-substituted congeners displayed similar characteristics with the tetra- to octa-PCDD/F isomers and even the total PCDD/Fs.     

Preparation of biochar catalyst with saccharide and lignocellulose residues of corncob degradation for corncob hydrolysis into furfural

This paper presented a novel process for production of furfural by hydrothermal degradation of corncob over biochar catalyst, in which it was prepared with the recycling degradation solution and lignocellulosic solid residues. The biochar catalyst was papered by lignocellulose residues and concentrated saccharide solution, and then impregnated in 0.5 mol/L sulphuric acid at room temperature for 24 h assisted by the ultrasonic vibration. In the system of recycling, 8.8 % lignocellulose residues and 100 % concentrated saccharide solution from corncob hydrolysis have been recycled. Hydrolysis of corncob was carried out at 180 °C for duration of 170 min over the biochar catalyst. The experimental results have shown that the furfural yield of up to 37.75 % and overall corncob conversion rate of 62.00 % could be achieved under optimum operating conditions for the catalysts preparation and the corncob hydrolysis. It is believed that the acid density of 4.27 mmol/g of biochar catalyst makes the SO₃H groups cleave β-1,4 glycosidic linkages effectively and hydrolyze the cellulose and hemicellulose to water-soluble sugars, as well as to facilitate dehydration of xylose to give the product of furfural.     

High CO2 adsorption on improved ZSM-5 zeolite porous structure modified with ethylenediamine and desorption characteristics with microwave

Journal of Material Cycles and Waste Management - Synthesized zeolite Socony Mobil-5 (ZSM-5) with large pore surface structures and modified with ethylenediamine were used to achieve high CO2...