Sanitation of seawater effluent from seaweed processing plants using a photo-catalytic TiO2 oxidation

A fine porcelain open-cell photo-catalytic filter with titanium dioxide (TiO(2)) was evaluated for sterilization and sanitation of bio-polluted industrial water. In simulated seawater industrial effluent samples, the populations of Escherichia coli and Vibrio parahaemolyticus quickly decreased and reached non-detectable level within 10min. In seawater effluents from a seaweed processing plant, the bacterial populations in two samples quickly decreased by more than 10(3). In another two samples the decreases were slow and lowered by less than 10(2). Using fluorescence microscopy, it was indicated that the bacterial cells treated with photo-catalytic TiO(2) were damaged. In addition, the protein concentration in simulated seawater effluent slowly decreased using the photo-catalytic TiO(2) reaction; and reached similar concentrations as seawater near cultured seaweed beds. These results indicate that using a reactor with a TiO(2) photo-catalyst filter was effective for the sanitation of seawater effluents.     

Degradation of 2,7-dichlorodibenzo-p-dioxin by Fe(3+)-H(2)O(2) mixed reagent

Fe(3+)-H(2)O(2) mixed reagent, but not Fe(2+)-H(2)O(2), was found to be capable of degrading 2,7-dichlorodibenzo-p-dioxin (DCDD). A reaction mixture of FeCl(3) (8 mM) and H(2)O(2) (1%) caused approximately 50% degradation within 6 h and >90% degradation within 24 h at 27 degrees C. Increasing the temperature remarkably stimulated degradation: at 70 degrees C, approximately 100% degradation was achieved within 15 min. When DCDD-treated model soil (5 micrograms/g) was conducted, approximately 100% of the DCDD was degraded within 30 min at 70 degrees C (both reagents were added every 10 min). These results suggest that Fe(3+)-H(2)O(2) mixed reagent may be a new tool for combating persistent environmental pollutants such as dioxins and polychlorinated biphenyls.     

Evaluation of solubilizing ability of humic aggregate basing on the phase-separation model

Solubilizing abilities of aggregates of humic acid (HA) to chlorinated benzenes (CBs) were investigated by means of the apparent water solubility enhancement. Both the water solubilities of 1,4-dichlorobenzene (DCB) and 1,2,4,5-tetrachlorobenzene (TeCB) linearly increased with increasing concentration of HA above the critical micelle concentration (CMC). Such solubilization behavior of CBs for HA was compatible with those for sodium dodecyl sulfate (SDS). These results indicate that the solubilization of CBs in the aqueous solution of HA above the CMC can be interpreted on the basis of the phase-separation model. Thus, the partition coefficients (K(mic)) of CBs between water and HA aggregate phases were calculated by assuming this model. The fact that the K(mic) value increased with increasing K(ow) of CBs supported the partition into the HA aggregate phase by hydrophobic interaction. The estimated K(mic) values of DCB were not dependent on the solution pH. Both K(mic) values of DCB and TeCB for the HA aggregate were found to be 4-5-fold lower than those of SDS.     

Production and characterization of KOH-activated carbon derived from polychlorinated biphenyl residue generated by the sodium dispersion process

Polychlorinated biphenyl (PCB) residues from the sodium dispersion (SD) process were employed as the raw materials for the production of activated carbon using KOH activation. The pore properties, such as the specific surface area and pore size distribution, were characterized using the Barrett–Joyner–Halenda method and the Horvath–Kawazoe method based on the N₂ adsorption isotherm at 77 K. The activated carbon produced showed similar adsorption capacities and specific surface areas to the commercially available product. The effects of the activation conditions on the porosity of the activated carbon produced were studied. The most significant factor affecting the specific surface proved to be the activation temperature. The activated carbon produced from PCB residues from the high-temperature (423–443 K) SD process had a binary pore size distribution well developed in the 4 nm region and in the micropore region. The pore structure of the carbon produced from PCB residues from the low-temperature (333–393 K) SD process had a wide range of micropores and mesopores.     

Taxonomy of oxalotrophic <Emphasis Type="Italic">Methylobacterium</Emphasis> strains

Most of the oxalotrophic bacteria are facultative methylotrophs and play important ecological roles in soil fertility and cycling of elements. This study gives a detailed picture of the taxonomy and diversity of these bacteria and provides new information about the taxonomical variability within the genus Methylobacterium. Twelve mesophilic, pink-pigmented, and facultatively methylotrophic oxalate-oxidizing strains were included in this work that had been previously isolated from the soil and some plant tissues by the potassium oxalate enrichment method. The isolates were characterized using biochemical tests, cellular lipid profiles, spectral characteristics of carotenoid pigments, G+C content of the DNA, and 16S rDNA sequencing. The taxonomic similarities among the strains were analyzed using the simple matching (S _SM) and Jaccard (S _J) coefficients, and the UPGMA clustering algorithm. The phylogenetic position of the strains was inferred by the neighbor-joining method on the basis of the 16S rDNA sequences. All isolates were Gram-negative, facultatively methylotrophic, oxidase and catalase positive, and required no growth factors. Based on the results of numerical taxonomy, the strains formed four closely related clusters sharing ≥85% similarity. Analysis of the 16S rDNA sequences demonstrated that oxalotrophic, pink-pigmented, and facultatively methylotrophic strains could be identified as members of the genus Methylobacterium. Except for M. variabile and M. aquaticum, all of the Methylobacterium type strains tested had the ability of oxalate utilization. Our results indicate that the capability of oxalate utilization seems to be an uncommon trait and could be used as a valuable taxonomic criterion for differentiation of Methylobacterium species.     

Measurement of ammonia volatilization from a field,in upland Japan,spread with cattle slurry

Ammonia volatilization from livestock manure is one of the most important pathways of nitrogen loss from agricultural cultivated fields. In this paper, we report the measurement of ammonia emission from cattle slurry manure applied to upland in Miyazaki, Japan. It has been determined that after the cattle slurry was sprayed on the upland surface, the emission flux of the first day was 110 microg N ha(-1) s(-1). The loss of NH4(+) -N in the applied slurry was 60% after 5 days following the spraying of cattle slurry.     

Measurement of total OH reactivity by laser-induced pump and probe technique—comprehensive observations in the urban atmosphere of Tokyo

Total OH reactivity was observed by use of the laser-induced pump and probe technique, and the urban air quality in Tokyo was diagnosed comprehensively. The concentrations of NO_x, CO, O₃, non-methane hydrocarbons (NMHCs) and oxygenated volatile organic compounds (OVOCs) were observed simultaneously. The observations were conducted in July and August 2003, and in January, February, May, and November 2004. Generally, the observed OH reactivity was higher than the calculated values derived using the observed concentrations of the trace species. The differences between the observed and calculated values in summer, spring, and autumn were approximately 30%. However, the difference in winter was smaller than those in the other seasons. In addition, while the differences observed in summer, spring, and autumn correlated with the total reactivity of the OVOCs (Σ_i k_OVOCi[OVOC_i](s⁻¹), k_i is rate constant of its compounds with OH), the correlations were not confirmed in the case of winter because atmospheric oxidation was less active and OVOCs levels were low in winter. These results suggest that the secondary products of the photochemical reactions in the atmosphere would be a missing sink for the OH loss process in the urban area.     

Method of removal of volatile organic compounds by using wet scrubber coupled with photo-Fenton reaction - Preventing emission of by-products

The photo-Fenton reaction was applied as a novel method for the removal of volatile organic compounds (VOCs) in the gas phase, and its effectiveness was experimentally examined. In conventional VOCs removal methods using a photocatalyst or ozone, VOCs are oxidized in the gas phase. Therefore, incompletely oxidized intermediates, which may have adverse effects on health, are likely to contaminate the treated air. On the other hand, in the VOCs removal method developed in this study, because the VOCs are oxidized in the liquid phase by the photo-Fenton reaction, any incompletely oxidized intermediates produced are confined to the liquid phase. As a result, the contamination of the treated air by these harmful intermediates can be prevented. Using a semi-batch process, it was found that the removal efficiency for toluene in a one-pass test (residence time of 17 s) was 61%, for an inlet toluene gas concentration of 930 ppbv, an initial iron ion concentration of 20 mg L⁻¹, and an initial hydrogen peroxide concentration of 630 mg L⁻¹. The removal efficiency was almost constant as long as H₂O₂ was present in the solution. Proton transfer reaction mass spectrometry analysis confirmed the absence of any incompletely oxidized intermediates in the treated air.