一起塔式起重机冲顶事故的技术分析

某桥梁施工企业在对桥面施工时,塔式起重机空载起升发生冲顶事故,起升钢丝绳断裂,造成吊钩装置坠落砸死1人伤害事故.本文介绍了事故情况、事故勘查要点和模拟试验及相关计算方法,分析事故技术原因,提出预防事故的建议.     

堆肥中纤维素和木质素的生物降解研究现状

堆肥是垃圾处理的主要方法之一 ,厨房垃圾、园林垃圾、农村秸秆和日常生活中的废弃纤维产品均可作为堆肥原料 ,这些原料中含有一定量的纤维素和木质素 ,而纤维素和木质素在堆肥过程中较难生物降解。因此 ,国内外学者致力于研究能加速纤维素和木质素降解的高效微生物。研究发现 ,对纤维素和木质素有降解能力的微生物主要是高温放线菌和高温真菌 ,其中有独特降解机制的白腐菌在木质素降解中起着重要作用     

生物炭基固定化菌剂对石油类污染物的高效降解

以生物炭为载体,采用吸附法制备固定化菌剂,通过分析不同材料生物炭的结构差异,探讨了不同生物炭的结构在固定化中的影响机制。SEM和EDS分析表明,降解菌主要固定在生物炭表面。生物炭内含有C、N和P成分,能为降解菌提供营养物质。生物炭的多孔结构能促进石油污染物的降解。结果表明,经玉米芯和秸秆生物炭固定化后F-3、R-7及其混合菌的除油率显著提高,分别为41.7%和29.5%、52.5%和42.8%、63.8%和53.2%。玉米芯生物炭固定化菌剂的除油率比秸秆生物炭固定化菌剂高10.6%。玉米芯生物炭表面比秸秆生物炭粗糙,其固定的微生物量为4.2×1010 cfu·g-1,固定效率达71.2%;秸秆生物炭固定的微生物量为2.5×1010 cfu·g-1,固定效率为57.6%。固定化菌剂的最佳制备条件为：选择500℃下热解3 h的玉米芯生物炭为载体,微生物接种量为10%,载体投加量为10 g·L-1,置于35℃、130 r·min-1摇床中固定18 h。     

中低温厌氧处理城市污水污泥颗粒化的研究

用高径比为3：1的UASB反应器分别在35℃和室温条件下处理模拟城市污水,研究了污泥的颗粒化过程.比较了在不同温度、浓度下形成的颗粒污泥的特征.水温为9～25℃,进水浓度为100～200 mg COD/L,水力上流速度（Vup）在0.013～0.11 m/h的4^#UASB反应器在60 d内在形成了成熟的颗粒污泥.研究表明,进水中低的有机物浓度,低的Ca^2＋、Mg^2＋浓度和低的Vup没有抑制颗粒化进程.     

CNTs/TiO2/CS光降解苯的动力学

综合光催化氧化苯的动力学过程、光辐射场模型和质量守恒定律,采用平板型反应器建立了碳纳米管/二氧化钛/壳聚糖(CNTs/TiO2/CS)催化薄膜光催化氧化气相苯的数学模型;该模型考虑了光强、相对湿度、初始浓度与气体流速对气相苯光降解的影响。结果表明,建立的数学模型与实验结果吻合较好。     

Bioaccessibility of polychlorinated biphenyls in workplace dust and its implication for risk assessment

Human exposure to bioaccessible PCBs via indoor dust is limited around the world. In the present study, the workplace dust sample from commercial office, hospital, secondary school, shopping mall, electronic factory and manufacturing plant were collected from Hong Kong for PCBs analyses. Total PCBs concentrations ranged from 46.8 to 249 ng g⁻¹, with a median of 107 ng g⁻¹. Manufacturing plant showed the highest concentration among all of sampling sites. PCB 77 was found as the dominant congeners. The bioaccessibility of PCBs in small intestinal juice ranging from 8.3% to 26.0% was significantly higher than that in gastric condition, ranging from 4.8% to 12.4%. In addition, significant negative correlations (p < 0.05) were observed between K_OW and bioaccessibility for all workplace dust samples. Risk assessment indicated that the averaged daily dose of dioxin-like PCBs via non-dietary intake of workplace dust, considering the bioaccessibility of PCBs, were much lower than the TDI of dioxins (2.3 pg WHO-TEQ kg bw⁻¹ d⁻¹) established by Joint FAO/WHO Expert Committee on Food Additives.     

Assessing heavy metal pollution in the surface soils of a region that had undergone three decades of intense industrialization and urbanization

Heavy metals in the surface soils from lands of six different use types in one of the world’s most densely populated regions, which is also a major global manufacturing base, were analyzed to assess the impact of urbanization and industrialization on soil pollution. A total of 227 surface soil samples were collected and analyzed for major heavy metals (As, Cd, Co, Cr, Cu, Fe, Hg, Mn, Ni, Pb, and Zn) by using microwave-assisted acid digestion and inductively coupled plasma–mass spectrometry (ICP-MS). Multivariate analysis combined with enrichment factors showed that surface soils from the region (>7.2?×?10⁴ km²) had mean Cd, Cu, Zn, and As concentrations that were over two times higher than the background values, with Cd, Cu, and Zn clearly contributed by anthropogenic sources. Soil pollution by Pb was more widespread than the other heavy metals, which was contributed mostly by anthropogenic sources. The results also indicate that Mn, Co, Fe, Cr, and Ni in the surface soils were primarily derived from lithogenic sources, while Hg and As contents in the surface soils were controlled by both natural and anthropogenic sources. The pollution level and potential ecological risk of the surface soils both decreased in the order of: urban areas?>?waste disposal/treatment sites?～?industrial areas?>?agricultural lands?～?forest lands?>?water source protection areas. These results indicate the significant need for the development of pollution prevention and reduction strategies to reduce heavy metal pollution for regions undergoing fast industrialization and urbanization.     

白腐菌应用于堆肥处理含木质素废物的研究

白腐菌对木质素具有较强的降解能力。通过在含大量木质素的模拟垃圾堆肥中采取添加白腐菌菌剂与不添加该菌剂2组实验对比,在相同堆肥处理条件下,接种菌剂的堆肥中木质素总量由274988mg降至15438mg,降解率达4386%,远高于未接种菌剂的堆肥中木质素的降解率,表明白腐菌可有效用于含木质素废弃物的堆肥处理,并有望于加速堆肥腐熟,提高堆肥效率。     

基于可调二极管激光技术的汽车尾气遥感监测系统

汽车尾气排放已成为最主要的城市污染源之一。汽车尾气的遥感监测系统作为一种高效实时监测汽车正常运行状况下的尾气排放方法已越来越受到人们的广泛关注。本文主要介绍基于可调二极管激光(TDL)技术的汽车尾气遥感监测系统。首先介绍遥感监测系统的产生与发展以及TDL技术的基本原理,其次阐述遥感监测系统的组成、关键技术以及系统的优点,并分析遥感监测系统在国内外的应用现状,最后提出目前应用中尚待解决的若干关键技术问题。     

预处理后的活性污泥对锌吸附的研究

剩余活性污泥处理是当今的热点问题,从活性污泥资源化的角度出发,将活性污泥加工成为锌离子的生物吸附剂,比较了8种方法预处理后的活性污泥对锌的吸附效果,分析了这8种方法对污泥吸附能力的影响机理.对经过NaOH和H2O2处理的污泥的吸附特性和影响因素进行了研究,结果表明该吸附过程符合Psemio-seconal Order吸附动力学模型及Freunomch吸附等温模型,低pH不利于吸附,适当提高温度可以增强吸附效果,增加污泥吸附剂浓度可以增加金属离子去除率,但是单位质量吸附剂吸附金属离子的量减小.用红外光谱对比的手段对吸附机理进行了探讨,结果表明污泥颗粒表面一些含氮氧的基团对zn.'的络合作用是主要的吸附机理.该研究在污泥资源化和废水中锌离子的去除方面有重要意义.