SiO2气凝胶隔热性能的影响因素研究

目的 在不同热流条件下,通过调整SiO2气凝胶的孔隙率、涂层厚度等,以满足合适的隔热要求。方法 针对中短程飞行器飞行时外壁面承受短时高热流的特点,在分析孔隙率对SiO2气凝胶热导率影响规律的基础上,通过数值仿真研究不同气凝胶孔隙率、气凝胶厚度及热流作用下的温度响应。结果 得到了不同条件下满足隔热要求的气凝胶最小厚度,以及气凝胶表面的最高温度。高温情况下,气凝胶孔隙率为96%时,有效热导率最低,孔隙率超过96%时,隔热性能变差。结论 当飞行器内壁面温度满足要求时,增大气凝胶的孔隙率,则需要减小气凝胶的厚度,相应的气凝胶表面温度会升高,但升幅很小。当飞行器外壁面承受长时间大热流时,仅调整气凝胶的厚度和孔隙率不能达到结构的隔热要求。     

陕西绥德地区黄土-古土壤序列地球化学特征及其环境指示意义

黄土高原北部的绥德地区处于干旱-半干旱地区,对环境变化的响应十分敏感,通过对黄土-古土壤的研究对比可以探索该区的古环境气候特征、环境变化信息等相关问题.本文对绥德黄土-古土壤进行常量、微量、稀土元素测试分析,并与其他地区黄土的地球化学特征进行了对比.结果 表明:绥德地区黄土-古土壤的主要化学成分以SiO2、Al2O3、...     

高职院校环境专业就业情况调查——以中国环境管理干部学院2014届毕业生为例

采用资料收集、实地调研、调查问卷等方法,对环境保护领域人才需求情况以及岗位知识技能的要求、环境专业毕业生的就业意向进行调查和分析。结果表明,企业对高职环保人才需求量较大,环保人员应具备的素质以分析问题能力和沟通能力为主;高职院校环境专业毕业生对目前环境保护行业就业形势认识清楚,对就业单位的环保人才素质需求分析正确,但求职过程中存在目标设定偏高等问题,因此,从课程设置、教学方法和就业指导方面提出措施。     

某运载火箭舱内无线系统电磁兼容性仿真分析方法与应用

为保证某运载火箭与卫星星箭分离面处的电磁兼容性设计,在火箭无线系统研制阶段,应用电磁仿真预测分析方法,构建火箭箭体及无线系统电磁仿真模型,搭建火箭系统电磁仿真平台,计算星箭分离面处的电磁辐射特性,分析潜在电磁干扰危害。在预测分析基础上,结合火箭、卫星总装状态下的星箭分离面处电磁兼容性测试,验证仿真预测分析方法的有效性。这种电磁仿真预测分析、试验验证相结合的方法,为在火箭设计全流程的电磁兼容设计提供支撑,同时实现了火箭研制与试验验证的闭环设计。     

Bioanalytical and instrumental analysis of estrogenic activities in drinking water sources from Yangtze River Delta

The estrogenic activities of source water from Yangtze River, Huaihe River, Taihu Lake and groundwater in Yangtze River Delta in the dry and wet season were determined by use of reporter gene assays based on African green monkey kidney (CV-1) cell lines. Higher estrogenic activities were observed in the dry season, and the estrogenic potentials in water samples from Taihu Lake were greater than other river basins. None of the samples from groundwater showed estrogen receptor (ER) agonist activity. The 17β-Estradiol (E2) equivalents (EEQs) of water samples in the dry season ranged from 9.41 × 10^?1 to 1.20 × 10¹ ng E2 L^?1. In the wet season, EEQs of all the water samples were below the detection limit as 9.00 × 10^?1 ng E2 L^?1 except for one sample from Huaihe River. The highest contribution of E2 was detected in Yangtze River as 99% of estrogenic activity. Nonylphenol (NP, 100% detection rate) and octylphenol (OP, 100% detection rate) might also be responsible for the estrogenic activities in water sources. Potential health risk induced by the estrogenic chemicals in source water may be posed to the residents through water drinking.     

试论油气集输场站消防力量配置原则

从消防安全基本原理出发,分析了油田企业消防力量配置上的两大"误导"因素,论述了油田企业消防力量配置的基本构想,提出了5种典型场站消防力量配备原则。     

Novel Co-Mg-Al-Ti-O catalyst derived from hydrotalcite-like compound for NO storage/decomposition

Catalysts of Co_1.5Mg_1.5/Al_0.9Ti_0.1O and Co_1.5Mg_1.5/AlO were successfully prepared by calcinations of corresponding hydrotalcite-like compounds at 800℃ for 4 hr. The derived oxides were of spinel phase and a small quantity of Ti substitution did not change the crystal purity. Their catalytic performance for the NO storage/decomposition was investigated. Ti incorporation enhanced the NO decomposition activity while has an opposite effect on the storage capacity of catalyst. In situ FT-IR spectra of the catalysts showed that the final adsorption species on the catalysts was coordinated nitrates/nitrites. In addition, NO storage/decomposition mechanism has been discussed on the basis of these observations.     

Size distributions and sources of elements in particulate matter at curbside, urban and rural sites in Beijing

Size distributions of 29 elements in aerosols collected at urban, rural and curbside sites in Beijing were studied. High levels of Mn, Ni, As, Cd and Pb indicate the pollution of toxic heavy metals cannot be neglected in Beijing. Principal component analysis (PCA) indicates 4 sources of combustion emission, crust related sources, traffic related sources and volatile species from coal combustion. The elements can be roughly divided into 3 groups by size distribution and enrichment factors method (EFs). Group 1 elements are crust related and mainly found within coarse mode including Al, Mg, Ca, Sc, Ti, Fe, Sr, Zr and Ba; Group 2 elements are fossil fuel related and mostly concentrated in accumulation mode including S, As, Se, Ag, Cd, Tl and Pb; Group 3 elements are multi-source related and show multi-mode distribution including Be, Na, K, Cr, Mn, Co, Ni, Cu, Zn, Ga, Mo, Sn and Sb. The EFs of Be, S, Cr, Co, Ni, Cu, Ga, Se, Mo, Ag, Cd, Sb, Tl and Pb show higher values in winter than in summer indicating sources of coal combustion for heating in winter. The abundance of Cu and Sb in coarse mode is about 2-6 times higher at curbside site than at urban site indicating their traffic sources. Coal burning may be the major source of Pb in Beijing since the phase out of leaded gasoline, as the EFs of Pb are comparable at both urban and curbside sites, and about two times higher in winter than that in summer.     

Sewage sludge disintegration by high-pressure homogenization: A sludge disintegration model

High-pressure homogenization (HPH) technology was applied as a pretreatment to disintegrate sewage sludge. The effects of homogenization pressure, homogenization cycle number, and total solid content on sludge disintegration were investigated. The sludge disintegration degree (DDCOD), protein concentration, and polysaccharide concentration increased with the increase of homogenization pressure and homogenization cycle number, and decreased with the increase of sludge total solid (TS) content. The maximum DDCOD of 43.94% was achieved at 80 MPa with four homogenization cycles for a 9.58 g/L TS sludge sample. A HPH sludge disintegration model of DD_COD= kN^aP^b was established by multivariable linear regression to quantify the effects of homogenization parameters. The homogenization cycle exponent a and homogenization pressure exponent b were 0.4763 and 0.7324 respectively, showing that the effect of homogenization pressure (P) was more significant than that of homogenization cycle number (N). The value of the rate constant k decreased with the increase of sludge total solid content. The specific energy consumption increased with the increment of sludge disintegration efficiency. Lower specific energy consumption was required for higher total solid content sludge.