Ergonomic assessment of selected workstations on a merchant ship

This study describes some key ergonomic factors within the engine room, navigation bridge and other locations of a merchant ship. Ergonomic assessments were carried out on a crew of a merchant ship. The study examines the importance of factors such as noise, vibration, heat radiation (in machinery areas), psychological stress and ergonomics of the physical arrangement of the navigation bridge. It also addresses the effect of working in confined areas for a long duration and the need to process large amounts of data, decision-making and the influence of specific operating conditions in different areas of a ship. This study includes analysis of workstations, working methods and the burden of environmental factors as well as a discussion of specific marine environmental conditions such as confined working and leisure spaces, long-term family and sociocultural separation, frequent changes in climate and time zones, and temporary physical overload and long-term psychological burdens.     

Response of leaf and fine roots proteomes of Salix viminalis L. to growth on Cr-rich tannery waste

Environmental Science and Pollution Research - The tannery industry is a major source of anthropogenic chromium (Cr) contamination due to the large amounts of solid waste produced and its...     

Assessment of soils contamination with veterinary antibiotic residues in Northern Poland using developed MAE-SPE-LC/MS/MS methods

Among the wide range of compounds reaching the soil are the veterinary antimicrobials. Since no regulations regarding acceptable levels of drug concentrations in the environment exist, monitoring tests, particularly concerning soils, are carried out very rarely. This study presents a preliminary assessment of the contamination of agricultural soils in Northern Poland with seven antimicrobial veterinary medicines which has never been carried out before. Veterinary drugs were detected in 54% of the examined soil samples; the most commonly detected drugs were sulfonamides and trimethoprim. The highest indicated concentrations refer to enrofloxacin (57.0 μg kg^?1) and trimethoprim (47.8 μg kg^?1). The presence of these target drugs in the soil environment confirms the need for further monitoring studies. The analytical methods developed in this study are an excellent tool to achieve this goal and allow an estimation of the risk connected with the presence of veterinary antimicrobials in soils.

     

Determination of phthalates in particulate matter and gaseous phase emitted in indoor air of offices

Environmental Science and Pollution Research - Phthalate esters (PAEs) are endocrine disrupters and can disrupt the functioning of different hormones, causing adverse effects on human health. Due...     

The first direct evidence of a Late Devonian coelacanth fish feeding on conodont animals

We describe the first known occurrence of a Devonian coelacanth specimen from the lower Famennian of the Holy Cross Mountains, Poland, with a conodont element preserved in its digestive tract. A small spiral and phosphatic coprolite (fossil excrement) containing numerous conodont elements and other unrecognized remains was also found in the same deposits. The coprolite is tentatively attributed to the coelacanth. Although it is unclear whether the Late Devonian coelacanth from Poland was an active predator or a scavenger, these finds provide the first direct evidence of feeding on conodont animals by early coelacanth fish, and one of the few evidences of feeding on these animals known to date. It also expands our knowledge about the diet and trophic relations between the Paleozoic marine animals in general.     

Sexual differences in food preferences in the white stork: an experimental study

Sex differences in the foraging ecology of monomorphic species are poorly understood, due to problems with gender identification in field studies. In the current study, we used experimental conditions to investigate the food preferences of the white stork Ciconia ciconia, an opportunistic species in terms of food, but characterised by a low level of sexual dimorphism. During a 10-day experiment, 29 individuals (20 females and 9 males) were studied by means of a ‘cafeteria test’ in which the storks’ diet consisted of mammals, birds, fish, amphibians, insects and earthworms. The storks preferred food characterised by high calorific and protein values such as mammals, birds and fish. Sexes differed strongly in their preferences; males preferred mammals, whereas females preferred birds. Moreover, females consumed insects and earthworms less often than males. Interestingly, males spent significantly less time foraging than females. We have demonstrated that the white stork exhibits clear sexual differences in food preferences which are mostly attributable to differences in parental duties, physiology and anatomy.     

Profiles of enzymatic activity in earthworms from zinc, lead and cadmium polluted areas near Olkusz (Poland)

The aim of the study was to determine whether there are signs of adaptation of soil fauna to a gradient of heavy metal contamination. Earthworms Aporrectodea caliginosa, Lumbricus terrestris and Eisenia fetida were collected during the spring and summer of 2000 and 2001 from meadow sites situated between 2 and 32 km from the Bukowno-Olkusz complex of zinc-lead ore mines and smelters. The heavy metal content in the soil near smelters reaches 10,500 mg/kg (d.w.) for Zn, 2600 mg/kg for Pb and 81.9 mg/kg for Cd. The sites differ with respect to species composition of earthworm community, with A. caliginosa being dominant. Complete data was obtained only for A. caliginosa, since other species were not abundant at all investigated sites during the whole period of investigation. The body burdens of Zn, Pb, Cd and Cu in A. caliginosa reached 1500, 100, 220 and 10 microg/g, respectively, in the vicinity of the smelter (2-4 km), and decreased to 400, 2, 36 and 6 microg/g at the most distant site (32 km). Cadmium and lead content was significantly elevated in the whole body of L. terrestris collected at the site 2.5 km distant from the smelters when compared to more distant sites, while in E. fetida only the body burden of cadmium was elevated at the nearest site compared to the next site of transect. Activities of glutathione peroxidase (GPX; EC 1.11.1.9) against hydrogen peroxide (H2O2) or cumene hydroperoxide (cumOOH), glutathione reductase (GR; EC 1.6.4.2), glutathione S-transferase (GST; EC 2.5.1.18) and catalase (CAT; EC 1.11.1.6) were assayed in postmitochondrial supernatant obtained from whole body homogenates. Seasonal and annual variations of enzyme activity were reflected by higher GPX activity in the late summer of 2001 in comparison with the spring and summer of 2000. This may reflect severe drought in the spring and summer of 2000. The activity of both GPX isozymes, GR and GST in A. caliginosa and L. terrestris increased with increasing distance from the smelters and reached maximum at sites III and IV (4 and 8 km from the smelters, respectively) and then it decreased in the animals from site V (32 km). These may be the effects of antagonism between the enzyme inducing and enzyme inhibiting action of smelter emissions, a phenomenon known as a hormetic effect. It is postulated here that this effect is of diagnostic value for metal pollution biomonitoring.     

Alginate beads containing water treatment residuals for arsenic removal from water—formation and adsorption studies

Water treatment residuals (WTRs) produced in large quantities during deironing and demanganization of infiltration water, due to high content of iron and manganese oxides, exhibit excellent sorptive properties toward arsenate and arsenite. Nonetheless, since they consist of microparticles, their practical use as an adsorbent is limited by difficulties with separation from treated solutions. The aim of this study was entrapment of chemically pretreated WTR into calcium alginate polymer and examination of sorptive properties of the obtained composite sorbent toward As(III) and As(V). Different products were formed varying in WTR content as well as in density of alginate matrix. In order to determine the key parameters of the adsorption process, both equilibrium and kinetic studies were conducted. The best properties were exhibited by a sorbent containing 5 % residuals, formed in alginate solution with a concentration of 1 %. In slightly acidic conditions (pH 4.5), its maximum sorption capacity was 3.4 and 2.9 mg g^?1 for As(III) and As(V), respectively. At neutral pH, the adsorption effectiveness decreased to 3.3 mg As g^?1 for arsenites and to 0.7 mg As g^?1 for arsenates. The presence of carboxylic groups in polymer chains impeded in neutral conditions the diffusion of anions into sorbent beads; therefore, the main rate-limiting step of the adsorption, mainly in the case of arsenates, was intraparticle diffusion. The optimal condition for simultaneous removal of arsenates and arsenites from water by means of the obtained composite sorbent is slightly acidic pH, ensuring similar adsorption effectiveness for both arsenic species.     

Conditions for the development of anaerobic digestion technologies using the organic fraction of municipal solid waste: perspectives for Poland

This article outlines problems related to the location of facilities designed to treat the organic fraction of municipal solid waste (OFMSW). Anaerobic digestion (AD) facilities are investigated as a treatment option, while taking into account the aspects of renewable energy generation. This research has been spurred on by the relationship between waste management, energy generation issues and spatial planning procedures. The analysis is focused on urban and semi-urban areas of medium and large cities. One of the most difficult issues associated with siting of waste processing plants is its integration with local infrastructures, avoiding conflicts and negative environmental impacts at the same time. This research aims to analyse possible locations for AD plants fuelled by OFMSW in Poland. Based on the experience gained from other countries and lessons learnt from the analysis of existing facilities in Europe, conditions for the location of this type of waste treatment plants have been defined, with the focus on economic, environmental and social issues. Most likely, the results of the multicriteria decision analysis for siting of municipal solid waste AD plants (M-BIST tool) could be transferred to other countries, especially those with a comparable GDP level and a similar framework for a waste management system.     

Study on the raw fish oil purification from PCDD/F and dl-PCB-industrial tests

The results of tests for the purification of fish oils with activated carbon for industrial use are presented. The optimum parameters for the process of purification (granulation of the activated carbon, its dosage, the oil temperature, and the duration of mixing the oil with activated carbon) were previously established for the laboratory scale. The optimization of the process consisted of selecting purification parameters that would allow for maximum reduction of the toxic polychlorinated dibenzo-para-dioxins and polychlorinated dibenzofurans (PCDD/Fs) content, while retaining the favorable high fatty acid content [C20:5 n−3, eicosapentaenoic acid (EPA) and C22:6 n−3, docosahexaenoic acid (DHA)]. The use of that optimum parameters in industrial conditions confirmed the satisfactory results obtained in laboratory tests. Five types of oil derived from various Baltic fish were purified. Reduction in the PCDD/Fs content was 77.0–93.6% on average, whereas in the dioxin-like polychlorinated biphenyls (dl-PCBs)—it was 42.7–50.5% on average, with insignificant changes in the total amount of EPA and DHA content. Furthermore, a significant reduction in the content of arsenic was noted (by about 62% on average), with insignificant changes in the content of organochlorine pesticides (OCPs), and marker polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs), cadmium, lead, and mercury.Purification provided fish oil having standardized parameters that allow for its use as feed additives, whilst retaining its favorable fatty acid content.