Field-breeding birds on organic and conventional arable farms in the Netherlands

In this study territory densities of field-breeding farmland birds were compared on pairwise-selected organic and conventional arable farms for two years. Differences in territory densities between the two farm types were explained examining the effects of three factors on territory densities: (1) non-crop habitats, (2) crop types and (3) within-crop factors. In both years, densities of most species did not differ between organic and conventional farms. Only skylark and lapwing were more abundant on organic farms, but only skylarks showed a consistent pattern over both years. Differences in crop types grown between the two systems were the only explaining factor for differences in densities of skylark. For lapwing, the difference was only partly due to differences in crop type, but differences in within-crop factors (probably as a result of crop management) were likely to have had an effect as well. There were no significant differences in abundance of non-crop habitats between the two farming systems, so this could not explain differences in territory densities.     

Runoff and sediment losses from 27 upland catchments in Southeast Asia: Impact of rapid land use changes and conservation practices

Rapid changes in upland farming systems in Southeast Asia generated predominantly by increased population pressure and ‘market forces’ have resulted in widespread land degradation that has been well documented at the plot scale. Yet, the links between agricultural activities in the uplands and downstream off-site effects remain largely unknown because of the difficulties in transferring results from plots to a larger scale. Many authors have thus pointed out the need for long-term catchment studies. The objective of this paper is to summarize the results obtained by the Management of Soil Erosion Consortium (MSEC) over the last 5 years from 27 catchments in five countries (Indonesia, Laos, Philippines, Thailand, and Vietnam). The purpose of the study was to assess the impacts of cultivation practices on annual runoff and erosion rates. Initial surveys in each catchment included topography, soils and land use. Monitoring included climatic, hydrologic and erosion (total sediment yield including bed load and suspended sediment load) data, land use and crop yields, and farmers’ income. In addition, new land management options were introduced through consultations with farmers and evaluated in terms of runoff and erosion. These included tree plantations, fruit trees, improved fallow with legumes, maize intercropped with legumes, planted fodder, native grass strips and agro-ecological practices (direct sowing and mulch-based conservation agriculture). Regressions analyses showed that runoff during the rainy season, and normalized runoff flow coefficient based on erosive rainfall during the rainy season (rainfall with intensity exceeding 25 mm h⁻¹) increase with the percentage of the catchment covered by maize. Both variables decrease with increasing soil depth, standard deviation of catchment slope (that reflects terrain roughness), and the percentages of the catchment covered by fallow (regular and improved), tree plantations and planted fodder. The best predictors of sediment yield were the surface percentages of maize, Job's tears, cassava and footpaths. The main conclusions generated from this study were: (i) soil erosion is predominantly influenced by land use rather than environmental characteristics not only at the plot scale but also at the catchment scale; (ii) slash-and-burn shifting cultivation with sufficiently long rotations (1 year of cultivation, 8 years of fallow) is too often unjustly blamed for degradation; (iii) in its place, continuous cropping of maize and cassava promotes high rates of soil erosion at the catchment scale; (iv) conservation technologies are efficient in reducing runoff and total sediment yield at the catchment scale; (v) the adoption of improved soil management technologies by upland farmers is not a function of the degree of intensification of their farming system and/or of their incomes. The results suggest that if expansion of maize and cassava into already degraded upland systems were to occur due to increased demand for biofuels, there is a risk of higher runoff and sediment generation. A failure to adopt appropriate land use management strategies will result in further rapid resource degradation with negative impacts to downstream communities.     

Optimization of Methods for Detecting Hepatitis A Virus in Food

Hepatitis A virus (HAV) is currently recognized as an important human food borne pathogen, and it is one of the most resistant enteric RNA viruses, is highly infectious, and may lead to widespread outbreaks. The aim of this study was to optimize the methods to detect HAV from artificially contaminated food. To this end, strawberry and lettuce were experimentally contaminated with HAV suspension containing 6 × 10⁶ copies/ml. After contamination, HAV persistence and washing procedure were evaluated at 0, 1, 3, 7, and 9 days of storage. Five elution buffers (PBS (pH 7.4)/0.1% Tween80; 50 mM glycine/3% (wt/vol) beef extract (pH 9.5); PBS (pH 7, 4); 25 mM glycine/0.1 Tween80; and 1 M sodium bicarbonate) were used to elute the virus, and qualitative and quantitative PCR were used for HAV detection. HAV was detected by qualitative and quantitative PCR using any of the five elution buffers, but PBS was the most effective. Even after washing, HAV was detected up to 9 days after contamination by quantitative PCR. Quantitative PCR was more sensitive than qualitative PCR since samples containing viral load lower than 1.4 × 10³ copies/ml could not be detected by qualitative PCR. Quantitative PCR can be used for rapid detection of food borne viruses and will help in the monitoring and control of food borne disease.     

Brazil's Electric Power Choices and Their Corresponding Carbon Emissions Implications

This study analyzes the options for meeting power demand in the Brazilianpower sector through the year 2015. Three policy cases are constructedto test economic and environmental policy measures against a baseline:advanced technologies scenario, environmental control scenario and carbon(C) elimination scenario. Least-cost modeling simulated these scenarios throughchanges in emissions fees and caps, costs for advanced technologies,demand side efficiency, and clean energy supplies. Results show that, in theabsence of alternative policies, new additions to Brazil's electric powersector will shift rapidly from hydroelectricity to combined-cycle natural gasplants. When the cost of environmental impacts are incorporated in theprice of power, the least-cost mix of electric power generation technologycould change in other ways. In all scenarios, energy efficiency andcogeneration play an important role in the least-cost power solution. Savingelectricity through increased efficiency offsets the needs for new supply andhas enormous potential in Brazil's industrial sector. Efficiency also reducesthe environmental burden associated with electricity production andtransmission, without compromising the quality of the services demandedby end users. Interesting enough, carbon dioxide (CO₂) emissions will remainrelatively low under almost every conceivable scenario.     

Food caching in orb-web spiders (Araneae: Araneoidea)

Caching or storing surplus prey may reduce the risk of starvation during periods of food deprivation. While this behaviour occurs in a variety of birds and mammals, it is infrequent among invertebrates. However, golden orb-web spiders, Nephila edulis, incorporate a prey cache in their relatively permanent web, which they feed on during periods of food shortage. Heavier spiders significantly reduced weight loss if they were able to access a cache, but lost weight if the cache was removed. The presence or absence of stored prey had no effect on the weight loss of lighter spiders. Furthermore, N. edulis always attacked new prey, irrespective of the number of unprocessed prey in the web. In contrast, females of Argiope keyserlingi, who build a new web every day and do not cache prey, attacked fewer new prey items if some had already been caught. Thus, a necessary preadaptation to the evolution of prey caching in orb-web spiders may be a durable or permanent web, such as that constructed by Nephila.     

Survey of the occurrence of residues of methyl tertiary butyl ether (MTBE) in Dutch drinking water sources and drinking water

An indicative survey has been carried out in The Netherlands investigating the presence of methyl tertiary butyl ether (MTBE) in drinking water and the corresponding sources. In total, 71 different sites used for the preparation of drinking water in The Netherlands were sampled in two successive seasons in 2001 involving the analysis of 156 samples. (ground water (n = 88), surface water (n = 17), bank filtrate water (n = 6) and drinking water (n = 45)). To combine high sample throughput with high selectivity and sensitivity, off-line purge and trap for sampling and gas chromatography mass spectrometry equipped with an automated thermal desorption sampler (TDS-GC-MS) was selected as the preferred analytical methodology. The developed procedure enabled the analysis of at least 40 samples per day and provided a limit of quantification of 2 ng l(-1). In the first period 63 samples of raw water were analyzed. Concentrations ranged between < 10 ng l(-1) and 420 ng l(-1) with a median concentration below 10 ng l(-1). The second period was focused at the re-sampling of positive locations (MTBE > 10 ng l(-1)) and a few additional drinking water utilities of which both the raw and drinking water of the utilities were analyzed. The median concentration of MTBE in the selected set of drinking water samples was 20 ng l(-1) (n = 45). At one location MTBE was found at a level of 2900 ng l(-1) caused by point source contamination of the ground water (11 900 ng l(-1)). Special attention has been paid to the quality of the results by analyzing all samples in duplicate and the analysis of control samples during each series of analyses.     

Sequential extractions of selenium soils from Stewart Lake: total selenium and speciation measurements with ICP-MS detection

Different techniques have been employed in order to evaluate the most efficient procedure for the extraction of selenium from soil as required for speciation. Selenium contaminated sediments from Stewart Lake Wetland, California were used. A strong acid mineralization of the samples gives quantitative total selenium, which is then used to estimate recoveries for the milder extraction methods. The different extraction methodologies involve the sequential use of water, buffer (phosphate, pH 7) and either acid solution (e.g. HNO3 or HCl) or basic solutions (e.g. ammonium acetate, NaOH or TMAH). Pyrophosphate extraction was also evaluated and showed that selenium was not associated with humic acids. The extractants were subsequently analyzed by size exclusion chromatography (SEC) with UV (254 and 400 nm) and on-line ICP-MS detection; anion exchange chromatography, and ion-pair reversed phase chromatography with ICP-MS detection. For sequential extractions the extraction efficiencies showed that the basic extractions were more efficient than the acidic. The difference between the acidic and the basic extraction efficiency is carried to the sulfite extraction, suggesting that whatever is not extracted by the acid is subsequently extracted by the sulfite. The species identified with the different chromatographies were selenate, selenite, elemental selenium and some organic selenium.     

Rate of occurrence of failures based on a nonhomogeneous Poisson process: an ozone analyzer case study

Atmospheric pollutant monitoring constitutes a primordial activity in public policies concerning air quality. In São Paulo State, Brazil, the São Paulo State Environment Company (CETESB) maintains an automatic network which continuously monitors CO, SO₂, NO _x , O₃, and particulate matter concentrations in the air. The monitoring process accuracy is a fundamental condition for the actions to be taken by CETESB. As one of the support systems, a preventive maintenance program for the different analyzers used is part of the data quality strategy. Knowledge of the behavior of analyzer failure times could help optimize the program. To achieve this goal, the failure times of an ozone analyzer—considered a repairable system—were modeled by means of the nonhomogeneous Poisson process. The rate of occurrence of failures (ROCOF) was estimated for the intervals 0–70,800 h and 0–88,320 h, in which six and seven failures were observed, respectively. The results showed that the ROCOF estimate is influenced by the choice of the observation period, t ₀?=?70,800 h and t ₇?=?88,320 h in the cases analyzed. Identification of preventive maintenance actions, mainly when parts replacement occurs in the last interval of observation, is highlighted, justifying the alteration in the behavior of the inter-arrival times. The performance of a follow-up on each analyzer is recommended in order to record the impact of the performed preventive maintenance program on the enhancement of its useful life.