固定化包埋亚硝酸菌短程脱氮与同步除磷工艺研究

为实现常温下低碳源城市生活污水的低能耗脱氮除磷,采用固定化技术和厌氧/好氧/缺氧(AOA)工艺耦合与游离组进行了对比实验研究。在温度为25±1℃、pH为8.0±1、DO为1±0.5 mg/L和HRT为9 h的条件下,两组运行结果表明,固定组具有较高的硝化效率和较强的适应能力,亚硝氮的积累率可以稳定维持在70%以上,对NH4+-N、COD和TP的去除率分别为92.2%、87.2%和81.3%,明显优于游离组。     

UASB-FEO-氨吹脱-CASS工艺在垃圾渗滤液处理中的应用

针对垃圾渗滤液可生化性差、氨氮含量高等特点和国内处理工艺现状,采用UASB-FEO-氨吹脱-CASS工艺处理合肥市龙泉山城市垃圾填埋场垃圾渗滤液。介绍了工艺的重要构筑物及其设计参数。运行实践表明,整套装置运行平稳,出水水质满足设计要求。根据出水水质对该工艺进行技术分析以及运行结果的讨论,并与新发布的技术规范及排放标准进行对比分析。     

Flotability and flotation separation of polymer materials modulated by wetting agents

The surface free energy, surface tension and contact angles were performed to investigate the properties of wetting agents. Adsorption of wetting agents changes wetting behavior of polymer resins. Flotability of polymer materials modulated by wetting agents was studied, and wetting agents change significantly flotability of polymer materials. The flotability decreases with increasing the concentration of wetting agents, and the wetting ability is lignin sulfonate (LS) > tannic acid (TA) > methylcellulose (MC) > triton X-100 (TX-100) (from strong to weak). There is significant difference in the flotability between polymer resins and plastics due to the presence of additives in the plastics. Flotation separation of two-component and multicomponent plastics was conducted based on the flotability modulated by wetting agents. The two-component mixtures can be efficiently separated using proper wetting agent through simple flotation flowsheet. The multicomponent plastic mixtures can be separated efficiently through multi-stage flotation using TA and LS as wetting agents, and the purity of separated component was above 94%, and the recovery was more than 93%.     

冲击倾向性煤体失稳破坏电荷感应问题试验研究

为了探究煤样冲击倾向性与煤样破裂电荷感应关系,利用自主研发的多通道电荷感应监测系统,开展单轴压缩条件下不同冲击倾向性煤样电荷信号规律的试验研究,对不同冲击倾向性煤样破坏全程电荷信号分布趋势以及电荷相关参量分别进行定性和定量分析。结果表明:煤样破裂过程的应力-电荷变化具有一致性,加载初始阶段电荷信号稳定,应力突降阶段电荷信号变化显著;不同冲击倾向性煤样,电荷信号变化规律有所不同;强冲击倾向煤样电荷信号主要集中在应力峰前的临近峰值应力阶段,弱冲击倾向煤样电荷信号在应力峰前和峰后均有,无冲击倾向煤样电荷信号主要集中在应力峰后的软化阶段;煤体冲击倾向性越强,应力峰后累积电荷量越小,单位时间电荷量越大;因此,可以通过电荷信号的分布以及电荷相关参量的量化分析,初步判断煤体冲击倾向,为冲击地压动力灾害的预测提供理论依据。     

A two-dimensional model for simulating the transport and fate of toxic chemicals in a stratified reservoir

A two-dimensional reservoir toxics model is essential to establishing effective water resources management and protection. In a reservoir, the fate of a toxic chemical is closely connected with flow regimes and circulation patterns. To better understand the kinetic processes and persistence and predict the dissipation of toxic contaminants in the reservoir during a spill or storm runoff event, a toxics submodel was developed and incorporated into an existing laterally integrated hydrodynamics and transport model. The toxics submodel describes the physical, chemical, and biological processes and predicts unsteady vertical and longitudinal distributions of a toxic chemical. The two-dimensional toxicant simulation model was applied to Shasta Reservoir in California to simulate the physico-chemical processes and fate of a volatile toxic compound, methyl isothiocyanate (MITC), during a chemical spill into the Sacramento River in 1991. The predicted MITC concentrations were compared with those observed. The effect of reservoir flow regimes on the transport and fate of the toxic substance was investigated. The results suggested that the persistence of MITC is significantly influenced by different flow regimes. Methyl isothiocyanate is more persistent in the reservoir under an interflow condition due to reduced volatilization from deep layers than under an overflow condition. In the overflow situation, the plume moved more slowly toward the dam and experienced greater dissipation. This analysis can assist in toxic spill control and reservoir management, including field sampling and closure of water intakes.     

有机离子载入-复焙烧失法制备新型净水材料

探索了一种制备介孔复合净水材料的新方法——载入有机离子一复焙烧失法。通过实验得到的最佳工艺参数为：有机载入剂为CTMAB,有机载入剂(质量浓度5g/L)加入量4mL／g,有机离子交换反应时间2h,反应温度40℃,复焙烧失温度230℃,复焙烧失时间1．5h。在最佳工艺条件下制备的净水材料对色度为7400倍、COD为3040mg／L的染料废水的脱色率为98．9％,略优于杏壳活性炭的脱色率(98．2％);COD去除率为91．3％,与杏壳活性炭的COD去除率91．7％相差无几。净水材料的染料吸附量是添加剂升温烧蚀后产品的近85倍,是酸洗刻蚀后产品的近590倍,是原材料的900多倍,其对染料废水的净化能力整体优于杏壳活性炭。     

零价铁类Fenton试剂氧化降解废水中有机污染物的研究进展

综述了近年来国内外Fe0类Fenton试剂氧化反应降解废水中有机污染物的研究现状,介绍了Fe0-H2O2体系、紫外光-Fe0-H2O2体系和可见光-Fe0-H2O2体系处理有机污染物的机理、特点和效果,并对未来Fe0类Fenton试剂氧化反应体系处理有机污染物的发展前景进行了展望。     

Effect of environmental parameters on the degradability of polymer films in laboratory-scale composting reactors

Previous research in our laboratory reported a convenient laboratory-scale composting test method to study the weight loss of polymer films in aerobic thermophilic (53°C) reactors maintained at a 60% moisture content. The laboratory-scale compost reactors contained the following synthetic compost mixture (percentage on dry-weight basis): tree leaves (45.0), shredded paper (16.5), food (6.7), meat (5.8), cow manure (17.5), sawdust (1.9), aluminum and steel shavings (2.4), glass beads (1.3), urea (1.9), and a compost seed (1.0) which is designated Mix-1 in this work. To simplify the laboratory-scale compost weight loss test method and better understand how compost mixture compositions and environmental parameters affect the rate of plastic degradation, a systematic variation of the synthetic mixture composition as well as the moisture content was carried out. Cellulose acetate (CA) with a degree of substitution (DS) value of 1.7 and cellophane films were chosen as test polymer substrates for this work. The extent of CA DS-1.7 and cellophane weight loss as a function of the exposure time remained unchanged when the metal and glass components of the mixture were excluded in Mix-2. Further study showed that large variations in the mixture composition such as the replacement of tree leaves, food, meat, and sawdust with steam-exploded wood and alfalfa (forming Mix-C) could be made with little or no change in the time dependence of CA DS-1.7 film weight loss. In contrast, substituting tree leaves, food, meat, cow manure, and sawdust with steam-exploded wood in combination with either Rabbit Choice (Mix-D) or starch and urea (Mix-E) resulted in a significant time increase (from 7 to 12 days) for the complete disappearance of CA DS-1.7 films. Interestingly, in this work no direct correlation was observed between the C/N ratio (which ranged from 13.9 to 61.4) and the CA DS-1.7 film weight loss. Decreasing moisture contents of the compost Mix-2 from 60 and 50 and 40% resulted in dramatic changes in polymer degradation such that CA DS-1.7 showed an increase in the time period for a complete disappearance of polymer films from 6 to 16 and 30 days, respectively.Guest Editor: Dr. Graham Swift, Rohm & Haas.Paper presented at the Bio/Environmentally Degradable Polymer Society—Second National Meeting, August 19–21, 1993, Chicago, Illinois.