Transesterification of hazelnut oil by ultrasonic irradiation

Ultrasonic irradiation is considered an effective way to increase mass transfer between immiscible liquid–liquid phases in a heterogeneous system leading to faster transesterification and higher yield and saving excess methanol and catalyst. In this study, the transesteri?cation of hazelnut oil with methanol and ethanol was performed in the presence of potassium hydroxide or sodium methoxide as a catalyst using two types of ultrasonic irradiation with a probe (20 kHz, 200 W) and a bath (35 kHz, 400 W); a conventional production method was also used. The reaction time, alcohol:oil molar ratio, catalyst type (KOH or NaOCH₃), and catalyst amount (wt.% of oil) were studied as experimental parameters. The highest methyl ester conversion was obtained as 98.12% by using ultrasonic probe at a 5:1 methanol:oil molar ratio with KOH 1 wt.% of oil as catalyst in 20-min reaction time at autogenous temperature. The application of ultrasonic irradiation by using a probe decreased the level of energy consumption, showing that this method may be a promising alternative compared with the conventional production method.     

Sulphur-oxidising bacteria isolated from deep caves improve the removal of arsenic from contaminated harbour sediments

Acidophilic S-oxidising bacteria isolated from sulphur-rich deep caves (Frasassi, Italy), characterised by relatively low temperature, were tested for their ability to mobilise (semi-)metals from contaminated sediments. Sediment samples from two commercial Italian seaports were used to set up bioleaching experiments. The effect of different growth substrates was also investigated. Our experiments revealed that S-oxidising bacteria isolated from Frasassi caves have a high potential to remove As from contaminated marine sediments, as never reported before. Although As solubilisation efficiency was quite low (i.e. about 30%), only a small amount of As was associated with non-residual fractions of the sediment. On the contrary, the solubilisation efficiencies of Zn and Ni (20% and 10%, respectively) were lower than those previously obtained by the use of other acidophilic bacteria and mainly influenced by the experimental conditions rather than by the presence of the S-oxidising bacteria. Results presented here open new perspectives in bioleaching applications for the remediation of contaminated sediments. Indeed, microbial strains adapted to relatively low-temperature environments could improve sediment bioleaching at temperature regimes where mesophilic and thermophilic strains are not favoured. Such strains could be exploited for developing selective bioremediation procedures for sediments contaminated with As, to be applied in multistep biotreatment processes.     

Genotoxic risk assessment in professionals working hairdressers area using buccal micronucleus assay,in Aydın City,Turkey

The aim of this study was to determine the genotoxic risk of professional hairdressers in Ayd?n City, Turkey, through investigating the micronucleus frequencies in buccal mucosa epithelial cells. All the hairdresser working hairdresser area were included in the genotoxic risk group (GRG = 20) in Ayd?n City, Turkey. The control group (CG = 20) comprised healthy individuals matching the gender and age of the GRG. Buccal mucosal scraping from all the 40 subjects of GRG (10 women and 10 men) and CG (10 women and 10 men) was stained with Giemsa stain and observed under light microscope (×40) for the presence of micronuclei (M 10 N) and karyolysis, pyknosis, condensed chromatin, karyorrhexis, nuclear bud, and binucleates in the exfoliated epithelial cells. There are significance between the incidence of MN in GRG and CG (P = <0.005) using one-way ANOVA, Kolmogorov-Smirnov Z test, and Spearman Rank Correlation Tests.     

The effect of pyrolysis atmosphere on bio-oil yields and structure

A food industry waste, almond shell, was pyrolyzed under three different environment static, nitrogen, and steam to produce bio-oil and its derivatives. The oil yield obtained at pyrolysis temperature of 600°C was 24.23% in a static atmosphere, whereas it increased to 27.25% and 33.05% in nitrogen and steam atmospheres, respectively. The bio-oil obtained under steam atmosphere is very efficient due to the production of high liquid and gas yields. Moreover, co-feeding steam during the pyrolysis altered the bio-oil structure by increasing the aliphatics and reducing the asphaltenes. Moreover, steam treatment also increases H/C and heating value of bio-oils. According to the obtained results, steam pyrolysis is an alternative option for future applications in refineries.     

Assessment of thermodynamics performance with sustainable propulsion indicators of a seaplane engine for different temperatures in the same altitude

Seaplanes have become an important tool along with rapidly developing technology in modern transportation for many countries related to sea. Considering the environmental evaluation for these aircraft, decreasing fossil fuels consumption and energy efficiency are important points for sustainability. For this purpose, in this study, first, the energy and exergy analyses based on the real data of a turboprop engine used in seaplane taken as the reference were performed. Then, new indicators developed for the sustainable propulsion index were examined and evaluated separately. The analyses were made for an altitude of 9000 ft and three different dead state temperatures of ?33°C, ?3°C, and 27°C. According to the analyses, while the average energy efficiencies were found to be 34.7%, 37.8%, and 40.7%, the average exergy efficiencies were found to be 19.24%, 21.25%, and 23.20%, respectively. In addition, the improvement potential due to irreversibility and entropy production for each case was also calculated and the results of the sustainable emission index were found to be very low. At the end of the study, the results were evaluated and some suggestions for the effective use of energy in the seaplanes were made.     

Analysis of coupled model uncertainties in source-to-dose modeling of human exposures to ambient air pollution: A PM2.5 case study

Quantitative assessment of human exposures and health effects due to air pollution involve detailed characterization of impacts of air quality on exposure and dose. A key challenge is to integrate these three components on a consistent spatial and temporal basis taking into account linkages and feedbacks. The current state-of-practice for such assessments is to exercise emission, meteorology, air quality, exposure, and dose models separately, and to link them together by using the output of one model as input to the subsequent downstream model. Quantification of variability and uncertainty has been an important topic in the exposure assessment community for a number of years. Variability refers to differences in the value of a quantity (e.g., exposure) over time, space, or among individuals. Uncertainty refers to lack of knowledge regarding the true value of a quantity. An emerging challenge is how to quantify variability and uncertainty in integrated assessments over the source-to-dose continuum by considering contributions from individual as well as linked components. For a case study of fine particulate matter (PM_2.5) in North Carolina during July 2002, we characterize variability and uncertainty associated with each of the individual concentration, exposure and dose models that are linked, and use a conceptual framework to quantify and evaluate the implications of coupled model uncertainties. We find that the resulting overall uncertainties due to combined effects of both variability and uncertainty are smaller (usually by a factor of 3–4) than the crudely multiplied model-specific overall uncertainty ratios. Future research will need to examine the impact of potential dependencies among the model components by conducting a truly coupled modeling analysis.     

Increased deposition of polychlorinated biphenyls (PCBs) under an AC high-voltage power line

There is considerable public concern regarding the potential risks to health of electromagnetic fields in general and high-voltage power lines in particular. As epidemiological findings are not supported by a clearly defined mechanism of direct magnetic field interactions with the human body, potential indirect effects are of interest. It has been suggested that an increased exposure to chemical pollutants could occur near high-voltage power lines due to formation and deposition of charged aerosols. The current study reports empirical evidence that seems to support this hypothesis. The deposition of 18 congeners of polychlorinated biphenyls (PCBs) was studied by collecting samples of pine needles under a 400 kV AC power line and at reference sites in the vicinity. Compared to the reference sites, the average deposition of PCB congeners under the power line was almost double. This difference between the two groups of samples was statistically significant. While it is premature to draw any conclusions regarding the human exposure near high-voltage power lines, the issue deserves attention and further investigations.     

An improved user-based beach climate index

In many coastal resort areas of the world, it is likely that optimal climatic conditions for beach use might occur outside the peak of the tourist season. Investigation of this issue together with associated publicity might help to spread the tourism load and hence reduce undesirable social and environmental effects of extreme seasonality in tourist demand. For this to take place, better knowledge of beach user preferences in terms of climate and bathing water temperature is required. Questionnaire surveys were carried out in Wales, Malta and Turkey to establish the preferences of north European beach users for thermal sensation and bathing water temperature, plus priority levels for other climatic attributes. A user-based beach climate index based on these preferences and priorities was formulated. Linkage was made between the user-generated ratings for various climatic conditions and published climate data to evaluate most major Euro-Mediterranean/Black Sea and a range of other beach tourism areas on a month-by-month basis. Results showed excessively hot thermal sensation in many southern and eastern Mediterranean coastal destinations during July and August, the present peak of the beach tourism season. Highest preference was given to water temperatures rather lower than those found in these areas during late summer. Many long haul coastal destinations popular with north European visitors had similar unpleasant thermal sensations over several months. Uncertainties and deficiencies still exist with the system, but from the point of view of north European beach users the final scores generated in this study may be regarded as good approximations of the quality of resort area climates for sedentary beach use.     

A New Phosphorus Paradigm for the Baltic Proper

The external phosphorus (P) loading has been halved, but the P content in the water column and the area of anoxic bottoms in Baltic proper has increased during the last 30 years. This can be explained by a temporary internal source of dissolved inorganic phosphorus (DIP) that is turned on when the water above the bottom sediment becomes anoxic. A load-response model, explaining the evolution from 1980 to 2005, suggests that the average specific DIP flux from anoxic bottoms in the Baltic proper is about 2.3 g P m⁻² year⁻¹. This is commensurable with fluxes estimated in situ from anoxic bottoms in the open Baltic proper and from hydrographic data in the deep part of Bornholm Basin. Oxygenation of anoxic bottoms, natural or manmade, may quickly turn off the internal P source from anoxic bottoms. This new P-paradigm should have far-reaching implications for abatement of eutrophication in the Baltic proper.

Electronic supplementary material

The online version of this article (doi:10.1007/s13280-013-0441-3) contains supplementary material, which is available to authorized users.