Anaerobic co-digestion of fat,oil, and grease (FOG): A review of gas production and process limitations

The addition of readily available high strength organic wastes such as fats, oils, and grease (FOG) from restaurant grease abatement devices may substantially increase biogas production from anaerobic digesters at wastewater treatment facilities. This FOG addition may provide greater economic incentives for the use of excess biogas to generate electricity, thermal, or mechanical energy. Co-digestion of FOG with municipal biosolids at a rate of 10–30% FOG by volume of total digester feed caused a 30–80% increase in digester gas production in two full scale wastewater biosolids anaerobic digesters (Bailey, 2007, Muller et al., 2010). Laboratory and pilot scale anaerobic digesters have shown even larger increases in gas production. However, anaerobic digestion of high lipid wastes has been reported to cause inhibition of acetoclastic and methanogenic bacteria, substrate, and product transport limitation, sludge flotation, digester foaming, blockages of pipes and pumps, and clogging of gas collection and handling systems. This paper reviews the scientific literature on biogas production, inhibition, and optimal reactor configurations, and will highlight future research needed to improve the gas production and overall efficiency of anaerobic co-digestion of FOG with biosolids from municipal wastewater treatment.     

The performance of Electro-Fenton oxidation in the removal of coliform bacteria from landfill leachate

Leachate pollution is one of the main problems in landfilling. Researchers have yet to find an effective solution to this problem. The technology that can be used may differ based on the type of leachate produced. Coliform bacteria were recently reported as one of the most problematic pollutants in semi-aerobic (stabilized) leachate. In the present study, the performance of the Electro-Fenton process in removing coliform from leachate was investigated. The study focused on two types of leachate: Palau Borung landfill leachate with low Coliform content (200 MPN/100 m/L) and Ampang Jajar landfill leachate with high coliform content (>24 × 10⁴ MPN/100 m/L). Optimal conditions for the Electro-Fenton treatment process were applied on both types of leachate. Then, the coliform was examined before and after treatment using the Most Probable Number (MPN) technique. Accordingly, 100% removal of coliform was obtained at low initial coliform content, whereas 99.9% removal was obtained at high initial coliform content. The study revealed that Electro-Fenton is an efficient process in removing high concentrations of pathogenic microorganisms from stabilized leachate.     

Minimizing human health effects of urban air pollution through quantification and control of motor vehicular carbon monoxide (CO) in Lahore

Impact of urban air pollution has variety of focuses such as urban ecology, human health, economy, etc. But human health is always given priority. Air pollution is threat to the lives of people living in big cities of Pakistan. In Lahore only there die 1,250 people annually because of air pollution. A strong correlation exists between urban air pollution and human health in Lahore. Growth of COPD is highest among other air pollution borne diseases. Existing mass transit system (one of driving forces behind motor vehicular emission) in Lahore due to frequent stoppages, entering and exit in flow of traffic causes excess discharge of motor vehicular carbon monoxide (CO) which is a hazardous to human health. Quantification and enumeration of this discharge is essential for environmental management. The paper is an attempt to highlight human health effects of urban air pollution through correlation and regression analysis. Further it is focused upon quantifying excess motor vehicular carbon monoxide through application of simplified mobile emission model. In light of results emission control measures are recommended.     

Removal of phenols and other pollutants from different landfill leachates using powdered activated carbon supplemented SBR technology

In this research, two types of sequencing batch reactors (SBRs) with 8 h of cycle times, namely non-powdered activated carbon (NPAC-SBR) and powdered activated carbon (PAC-SBR), were used for the treatment of raw leachates at Kulim and Pulau Burung landfill sites. To test the performance of SBRs, phenols, total iron, zinc, ammonia, nitrite, nitrate, color, suspended solids, chemical oxygen demand, biochemical oxygen demand, and total dissolved salts removal efficiencies and sludge volume index (SVI) were studied at both sites. The rates of phenols removal, for instance in NPAC-SBRs and PAC-SBRs at Kulim, were 25% and 55%, respectively, whereas those at Pulau Buring were 94.81% and 97.75%, respectively. PAC as adsorbent in PAC-SBRs enhanced the removal efficiencies of the aforementioned pollutants from leachates at both sites. In addition, PAC as adsorbent decreased the SVI values at Kulim (59.7 mL/g) and Pulau Burung (91.4 mL/g) leachates and improved the nitrification and denitrification processes.     

Erroneous mass transit system and its tended relationship with motor vehicular air pollution (An integrated approach for reduction of urban air pollution in Lahore)

Air pollution is threat to the lives of people living in big cities of Pakistan. In Lahore 1,250 people die annually because of air pollution.Mass transit system that can be put forth as solution to urban air pollution is contingent with right choice of system and its affiliation with motorized vehicles and nature of urban air pollution.Existing mass transit system in Lahore due to untrue operation causes surfeit discharge of motor vehicular carbon monoxide. Tended relationships of mass transit system with motorized vehicles and urban air pollution are quite noteworthy. The growing motor vehicles (a consequence of flawed public mass transit system) are potential source of urban air pollution. This paper attempts to highlight correlations and regression curves of existing mass transit system. Further it recommends a two facet approach for reduction of motor vehicular air pollution in Lahore.     

Allelopathic potential of oil seed crops in production of crops: a review

Agricultural production enhancement has been realized by more consumption of fossil energy such as fertilizer and agrochemicals. However, the production provides the present human with sufficient and diversified commodities, but at the same time, deprives in some extent the resources from the future human as well. In the other hand, it is known that synthetic herbicides face worldwide threats to human’s health and environment as well. Therefore, it is a great challenge for agricultural sustainable development. The current review has been focussed on various oilseed crop species which launch efficient allelopathic intervention, either with weeds or other crops. Crop allelopathic properties can make one species more persistent to a native species. Therefore, these crops are potentially harmful to both naturalized as well as agricultural settings. On the other side, allelopathic crops provide strong potential for the development of cultivars that are more highly weed suppressive in managed settings. It is possible to utilize companion plants that have no deleterious effect on neighbor crops and can be included in intercropping system, thus, a mean of contributing to agricultural sustainable development. In mixed culture, replacement method, wherein differing densities of a neighbor species are planted, has been used to study phytotoxic/competitive effects. So, to use alternative ways for weed suppression has become very crucial. Allelochemicals have the ability to create eco-friendly products for weed management, which is beneficial for agricultural sustainable development. Our present study assessed the potential of four oilseed crops for allelopathy on other crops and associated weeds.     

Column dynamic studies and breakthrough curve analysis for Cd(II) and Cu(II) ions adsorption onto palm oil boiler mill fly ash (POFA)

This paper investigates the adsorption characteristics of palm oil boiler mill fly ash (POFA) derived from an agricultural waste material in removing Cd(II) and Cu(II) from aqueous solution via column studies. The performance of the study is described through the breakthrough curves concept under relevant operating conditions such as column bed depths (1, 1.5, and 2 cm) and influent metal concentrations (5, 10, and 20 mg/L). The Cd(II) and Cu(II) uptake mechanism is particularly bed depth- and concentration-dependant, favoring higher bed depth and lower influent metal concentration. The highest bed capacity of 34.91 mg Cd(II)/g and 21.93 mg Cu(II)/g of POFA was achieved at 20 mg/L of influent metal concentrations, column bed depth of 2 cm, and flow rate of 5 mL/min. The whole breakthrough curve simulation for both metal ions were best described using the Thomas and Yoon–Nelson models, but it is apparent that the initial region of the breakthrough for Cd(II) was better described using the BDST model. The results illustrate that POFA could be utilized effectively for the removal of Cd(II) and Cu(II) ions from aqueous solution in a fixed-bed column system.     

Influence of compost amendment rate and level of compaction on the hydraulic functioning of soils

There has been widespread interest in using compost to improve the hydrologic functions of degraded soils at construction sites for reducing runoff and increasing infiltration. The objective of this study was to determine the effects of compost amendment rate on saturated hydraulic conductivity (K_s) and water retention in order to identify target compost rates for enhancing soil hydrologic functions. Samples were prepared with three soil textures (sandy loam, silt loam, and sandy clay loam), amended with compost at 0%, 10%, 20%, 30%, 40%, and 50%. All soils were tested at a porosity of 0.5 m³/m³, and the sandy loam was further tested at high (0.55 m³/m³) and low (0.4 m³/m³) porosities. The K_s and water retention data were then used to model infiltration with HYDRUS-1D. With increasing compost amendment rate, K_s and water retention of the mixtures generally increased at the medium porosity level, with more compost needed in heavier soils. As porosity decreased in the sandy loam soil, the amount of compost needed to improve K_s rose from 20% to 50%. Water distribution in pore fractions (gravitational, plant-available, and unavailable water) depended on texture, with only the highest compost rates increasing plant-available water in one soil. Results suggest soil texture should be taken into consideration when choosing a compost rate in order to achieve soil improvement goals. Hydrologic benefits may be limited even at a high rate of compost amendment if soil is compacted.     

Physicochemical properties associated with the presence of <Emphasis Type="Italic">Burkholderia pseudomallei</Emphasis> in small ruminant farm water supplies in Peninsular Malaysia

Burkholderia pseudomallei causes melioidosis, a life-threatening infection in both humans and animals. Water is an important reservoir of the bacteria and may serve as a source of environmental contamination leading to infection. B. pseudomallei has an unusual ability to survive in water for a long period. This paper investigates physicochemical properties of water associated with the presence of B. pseudomallei in water supply in small ruminant farms in Peninsular Malaysia. Physicochemical properties of water samples taken from small ruminant farms that included temperature, pH, dissolved oxygen (DO₂), optical density (OD), and chemical oxygen demand (COD) were measured after which the samples were cultured for B. pseudomallei. Multivariable logistic regression model revealed that slightly acidic water pH and higher COD level were significantly associated with the likelihood of the B. pseudomallei presence in the water.