Nutrient removal in a pilot and full scale constructed wetland, Putrajaya city, Malaysia

Putrajaya Wetlands in Malaysia, a 200ha constructed wetland system consisting of 24 cells, was created in 1997-1998 to treat surface runoff caused by development and agricultural activities from an upstream catchment before entering Putrajaya Lake (400ha). It was designed for stormwater treatment, flood control and amenity use. The water quality improvement performance of a section of the wetland cells is described. The nutrient removal performance was 82.11% for total nitrogen, 70.73% for nitrate-nitrogen and 84.32% for phosphate, respectively, along six wetland cells from Upper North UN6 to UN1 from April to December 2004. Nutrient removal in pilot scale tank systems, simulating a constructed wetland and planted with examples of common species at Putrajaya, the Common Reed Phragmites karka and Tube Sedge Lepironia articulata, and the capacity of these species to retain nutrients in above and below-ground plant biomass and substrate is reported. The uptake of nutrients by the Common Reed and Tube Sedge from the pilot tank system was 42.1% TKN; 28.9% P and 17.4% TKN; 26.1% P, respectively. The nutrient uptake efficiency of the Common Reed was higher in above-ground than in below-ground tissue. The results have implications for plant species selection in the design of constructed wetlands in Malaysia and for optimizing the performance of these systems.     

Leachability of printed wire boards containing leaded and lead-free solder

Due to environmental concerns and regulatory initiatives, electronics manufacturers are replacing the tin/lead solder commonly used on printed wire boards (PWBs) with alternative solders. To determine the potential waste management impacts of the alternative solders versus the tin/lead solder, two leaching tests on PWBs manufactured with five alternative types of solder were performed: the toxicity characteristic leaching procedure (TCLP) and the synthetic precipitation leaching procedure (SPLP). These tests are commonly used in the US regulatory community to assess pollutant leachability in different disposal scenarios. The article discusses the application and limitations of these tests. The five types of solders investigated were 63Sn/37Pb, 99.3Sn/0.7Cu, 95.5Sn/4Ag/0.5 Cu, 96Sn/2.5Ag/1Bi/0.5Cu, and 42Sn/1Ag/57Bi. The leaching tests were conducted on four PWB sections, each with a unique configuration and solder density. The largest lead concentrations were observed from the PWBs containing Sn/Pb solder, with concentrations exceeding the hazardous waste toxicity characteristic (TC) in TCLP leachates. Silver, the other regulated element used in the solders, was rarely detected, with none of the samples exceeding the TC limit for silver. High copper concentrations were observed and were determined to result from the PWB itself, not from the copper-containing solders.     

Assessing hydrological impact of potential land use change through hydrological and land use change modeling for the Kishwaukee River basin (USA)

We connected a cellular, dynamic, spatial urban growth model and a semi-distributed continuous hydrology model to quantitatively predict streamflow in response to possible future urban growth at a basin scale. The main goal was to demonstrate the utility of the approach for informing public planning policy and investment choices. The Hydrological Simulation Program-Fortran (HSPF) was set up and calibrated for the Kishwaukee River basin in the Midwestern USA and was repeatedly run with various land use scenarios generated either by the urban growth model (LEAMluc) or hypothetically. The results indicate that (1) the land use scenarios generated by LEAMluc result in little changes in total runoff but some noticeable changes in surface flow; (2) the argument that low flows tend to decrease with more urbanized areas in a basin was confirmed in this study but the selection of indicators for low flows can result in misleading conclusions; (3) dynamic simulation modeling by connecting a distributed land use change model and a semi-distributed hydrological model can be a good decision support tool demanding reasonable amount of efforts and capable of long-term scenario-based assessments.     

Indicators for managing biosolids in Ireland

Sustainable development indicators (SDIs) have emerged as a tool to measure progress towards sustainable development for a number of fields. However, no indicator initiative to date has been aimed at biosolids management at local authority, regional or national levels. This paper presents a study where stakeholders involved in the management of biosolids in Ireland participated in the development of SDIs for managing biosolids at the local/regional level. A significant 81% of participating stakeholders find SDIs either 'useful' or 'very useful' as a tool for managing biosolids. A suite of 22 indicators has been developed and arranged according to the driving force-pressure-state-impact-response (DPSIR) indicator framework. The indicators address all the domains of biosolids management namely, production, quality, cost, legislation/regulation, training/research and recycling/disposal. The stakeholder approach is recognition that no effective indicator set can be developed without the input of stakeholders.     

Identifying Linkages Between Land Use,Geomorphology, and Aquatic Habitat in a Mixed-Use Watershed

The potential impacts of land use on large woody debris (LWD) were examined in Sourdough Creek Watershed, a rapidly growing area encompassing Bozeman, Montana, USA. We identified six land classes within a 250 m buffer extending on either side of Sourdough Creek and assessed aquatic habitat and geomorphologic variables within each class. All LWD pieces were counted, and we examined 14 other variables, including undercut bank, sinuosity, and substrate composition. LWD numbers were generally low and ranged from 0 to 8.2 pieces per 50 m of stream. Linear regression showed that LWD increased with distance from headwaters, riparian forest width, and sinuosity in four of the six land classes. Statistically significant differences between land classes for many aquatic habitat and geomorphologic variables indicated the impacts of different land uses on stream structure. We also found that practices such as active wood removal played a key role in LWD abundance. This finding suggests that managers should prioritize public education and outreach concerning the importance of in-stream wood, especially in mixed-use watersheds where wood is removed for either aesthetic reasons or to prevent stream flooding.     

Application of Conservation Biology Research to Management

Abstract: We conducted a survey of all primary authors of "Contributed Papers" and "Research Notes" in Conservation Biology from 1987 to 1998 to assess the perceived effectiveness of published management recommendations. No systematic survey has previously assessed the degree to which authors believe that resource managers are using the growing body of research published in Conservation Biology . In March 1999, we sent surveys to 667 authors of 790 published papers, asking whether their papers included management recommendations, whether such recommendations have been used in practice, and why they believed they have or have not been used. We received completed surveys from 198 authors of 223 papers. The percentage of papers that included management recommendations increased from 1987 to 1991, then stabilized at about 75%. Author perception of the use of management recommendations generally increased over the 5 years from 1994 to 1998. Initiatives of federal, state, and local agencies were the most often-cited cause of successful implementation of management recommendations, accounting for over half of all such cases. Our survey suggests that authors in Conservation Biology have increased the use of explicit management recommendations in their papers and that authors believe their recommendations are being used to an increasing degree.     

PFOS or PreFOS? Are perfluorooctane sulfonate precursors (PreFOS) important determinants of human and environmental perfluorooctane sulfonate (PFOS) exposure?

The extent to which perfluorooctanesulfonate precursors (PreFOS) play a role in human or environmental exposure to perfluorooctanesulfonate (PFOS) is not well characterized. The diversity of manufactured PreFOS and its degradation products (e.g. C(8)F(17)SO(2)R and C(8)F(17)SO(2)NR'R', where R is H or F, and R' and R' are various) has made it difficult to track their fate. Temporal trends of PFOS in both humans and wildlife are discrepant, thus it is difficult to predict future exposure, and hypotheses about the role of PreFOS have been raised. Although abiotic degradation of commercially important PreFOS materials requires further research, current data suggest that the yield of PFOS is negligible or minor. On the other hand, in vivo biotransformation of PreFOS yields PFOS as the major metabolite, and >32% yields have been observed. In Canadians, exposure to PreFOS was equivalent or greater than direct PFOS exposure prior to 2002. In most ocean water, PFOS is dominant to PreFOS, but in the oceans east of Greenland there may be more PreFOS than PFOS, consistent with the fact that whales and humans in this region also show evidence of substantial PreFOS exposure. Quantitative assessments of PFOS body-burdens coming from PreFOS are complicated by the fact that PreFOS partitions to the cellular fraction of blood, thus biomonitoring in serum under predicts PreFOS relative to PFOS. Many unknowns exist that prevent accurate modelling, thus analytical methods that can distinguish directly manufactured PFOS, from PFOS that has been biotransformed from PreFOS, should be applied in future human and environmental monitoring. Two new source tracking principles are presented and applied to human serum.     

Determining sources of dissolved organic carbon and disinfection byproduct precursors to the McKenzie River, Oregon

This study was conducted to determine the main sources of dissolved organic carbon (DOC) and disinfection byproduct (DBP) precursors to the McKenzie River, Oregon (USA). Water samples collected from the mainstem, tributaries, and reservoir outflows were analyzed for DOC concentration and DBP formation potentials (trihalomethanes [THMFPs] and haloacetic acids [HAAFPs]). In addition, optical properties (absorbance and fluorescence) of dissolved organic matter (DOM) were measured to provide insight into DOM composition and assess whether optical properties are useful proxies for DOC and DBP precursor concentrations. Optical properties indicative of composition suggest that DOM in the McKenzie River mainstem was primarily allochthonous--derived from soils and plant material in the upstream watershed. Downstream tributaries had higher DOC concentrations than mainstem sites (1.6 +/- 0.4 vs. 0.7 +/- 0.3 mg L(-1)) but comprised < 5% ofmainstem flows and had minimal effect on overall DBP precursor loads. Water exiting two large upstream reservoirs also had higher DOC concentrations than the mainstem site upstream of the reservoirs, but optical data did not support in situ algal production as a source of the added DOC during the study. Results suggest that the first major rain event in the fall contributes DOM with high DBP precursor content. Although there was interference in the absorbance spectra in downstream tributary samples, fluorescence data were strongly correlated to DOC concentration (R2 = 0.98), THMFP (R2 = 0.98), and HAAFP (R2 = 0.96). These results highlight the value of using optical measurements for identifying the concentration and sources of DBP precursors in watersheds, which will help drinking water utilities improve source water monitoring and management programs.