Some issues relating to the use of perfluorooctanesulfonate (PFOS) samples as reference standards

Samples of potassium perfluorooctanesulfonate (PFOSK) from three suppliers were analyzed by LC-ESI-MS/MS for purity and by LC-ESI-MS for the percentage of linear isomer present. Our data indicated that the purity ranged from 80% to 98% and the percentages of linear isomer from 67% to 79%. The proportion of branched isomers present in the samples was also estimated using (19)F NMR. These results agreed quite closely with those found by LC-ESI-MS indicating that there is essentially no difference in overall SIM response factor for the branched isomers vs. that of the linear isomer. Several further observations relevant to the use of standards when analyzing for PFOS were encountered during this study. It appears unlikely that matrix effects attributable to the cation (sodium or potassium) present in PFOSNa or PFOSK internal standards is an issue. In seeking potential matrix effects, it was found that the chromatography was improved substantially when the standard was injected as a solution in 80:20 methanol/water rather than 100% methanol. Notably, in concert with the improvement in chromatography, an increase of about 10% in response was observed. In some closely related studies, when (18)O(2) mass-labeled perfluorohexanesulfonate was used as an internal standard, the actual and theoretical concentration ratios matched closely those for related native sulfonates as long as they did not co-elute. However, when they did co-elute, the peak intensities of the native species were enhanced by about 5%, while those of the labeled compound were suppressed by a similar amount. If this effect were not taken into account, the concentration of the native would be inflated by 10%.     

Contaminant-induced irreversible changes in properties of the soil-vadose-aquifer zone: an overview

Most studies on contaminant interactions with the subsurface environment focus on contaminant transport, retention and persistence, and on potential remediation of polluted soils, vadose zones and aquifers. Changes in the soil-vadose-aquifer zone (SVAZ) matrix and properties, caused by human activities, are thus usually considered to be deviations from a normal geochemical environment, which will disappear by natural processes or by specific remediation procedures. However, contaminants may also cause, under specific conditions, irreversible changes in SVAZ properties. In this critical overview, we discuss a different aspect of contaminant-SVAZ interactions: irreversible changes in natural SVAZ properties as a result of anthropogenically-induced chemical contamination. We survey selected research results that illustrate various aspects of such phenomena, in soils, aquifers and the vadose zone. Grouping contaminants according to major and trace elements, we observe that major elements can irreversibly affect water transmission and other physical and chemical properties of the SVAZ, mainly in the liquid phase, while trace elements affect mostly the solid phase matrix.     

Zinc processing in the USA : An analysis of a declining industry

The purpose of this paper is to analyse the recent behaviour of the US zinc processing industry and the impact of US government policies on it. The first section of the paper is a discussion on the basic structure and conditions of the US zinc processing industry since 1950 and how they have changed. The discussion contains a general presentation of the US zinc market, a detailed look at the behaviour of individual primary zinc processing plants in the USA, Canada, Japan and Western Europe and an analysis of US government policies and their impacts on the US zinc industry. The second section of the paper is a discussion of the factors that have contributed to the decline in US zinc processing capacity and the type of government policy that should be followed in response.     

Impacts of freshwater wetlands on water quality: A landscape perspective

In this article, we suggest that a landscape approach might be useful in evaluating the effects of cumulative impacts on freshwater wetlands. The reason for using this approach is that most watersheds contain more than one wetland, and effects on water quality depend on the types of wetlands and their position in the landscape. Riparian areas that border uplands appear to be important sites for nitrogen processing and retention of large sediment particles. Fine particles associated with high concentrations of phosphorus are retained in downstream wetlands, where flow rates are slowed and where the surface water passes through plant litter. Riverine systems also may play an important role in processing nutrients, primarily during flooding events. Lacustrine wetlands appear to have the least impact on water quality, due to the small ratio of vegetated surface to open water. Examples are given of changes that occurred when the hydrology of a Maryland floodplain was altered.     

Estimates of health benefits due to reductions in ambient NO2 levels

A method is presented here by which the actual numbers of individuals in the U.S. population who would be expected to suffer respiratory illness as a result of exposure to ambient nitrogen dioxide (NO₂) concentrations in excess of the Federally-designated ambient air quality standard can be estimated. At the same time we have attempted to quantify how these adverse health effects would be alleviated by various degrees of reductions in current ambient concentrations. In addition, the health benefit expected to be derived by various NO_x emission control strategies will be examined utilizing the health benefit estimation method presented.It is estimated that there were approximately 33.2×10⁶ excess cases of respiratory illnesses in the U.S. in 1973 associated with ambient NO₂ concentrations in excess of the national ambient standard. A reduction of approximately 50 to 60 percent below 1973 NO₂ levels is needed to essentially eliminate excess respiratory illness associated with ambient NO₂ concentration.     

Using a process-based model to understand dynamics of Chinese agricultural and water technology development from 8000 bc to 1911 ad

Advancements in technology are inextricably bound to our society and the natural environment. However, how the development process of a technology system interacts with both remains unclear. We propose a process model to understand the complex dynamics among technology, society, and the environment via seven interactive elements: technologies, actors, receiving bodies, natural contexts, social contexts, temporal–spatial contexts, and outcomes. The model was applied to agricultural and water technology development in China from 8000 bc to 1911 ad. Our findings show that these elements did not play equally important roles in different periods of the development in ancient China, with social contexts most dominating during the earlier periods and both social and environmental concerns arising towards the later periods. The proposed model, by identifying the elements in the technology development that should be strengthened, can act as an analysis device to assist in reconfiguring a more sustainable socio-technological system.Electronic supplementary materialThe online version of this article (10.1007/s13280-020-01424-7) contains supplementary material, which is available to authorized users.     

Cooling suits, physiological response, and task performance in hot environments for the power industry.

Heat stress on workers working outdoors in the power industry may result in fatigue and deterioration in task performance. This research collected and analyzed data on task performance of workers working indoors and outdoors with and without a cooling suit. The task performance was compared on the basis of heart rate, oxygen consumption, tympanic temperature, subjective responses, productivity, and error rates. Based on One-Way Analysis Of Variance (ANOVA) results, a significantly lower estimated working oxygen consumption was observed (p < .001) when the cooling suit was worn. The productivity was higher while workers wore the cooling suit as compared to no cooling suit (p = .011) whereas the error rates were significantly lower (p < .001). Also a significantly lower self-reported discomfort was observed in the neck and shoulders while working wearing the cooling suit (p = .004). This study concluded that wearing a cooling suit while working outdoors was associated with physiological benefits as well as improved task performance of the study participants.