在实践中不断提高安全预评价的质量

笔者结合建设项目劳动安全预评价的工作实践 ,分析了安全预评价中存在的主要问题 ,介绍了首都经贸大学劳动安全卫生评价中心在安全预评价工作中的有益探索和成功经验 ,提出了进一步提高安全预评价质量的建议 ,努力寻求一条使安全预评价质量持续改进、不断提高的有效途径。     

Role of black carbon in the distribution of polychlorinated dibenzo-p-dioxins/dibenzofurans in aged field-contaminated soils

Floodplain soils containing elevated levels of polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDD/Fs) were collected from several locations along the Tittabawassee River (Michigan, USA). The PCDD/F profiles of these soils exhibited distinct congener patterns consistent with byproducts from either chloralkali manufacturing or chlorophenols productions. Black carbon (BC) particles were isolated for the first time from floodplain soil impacted by PCDD/Fs. Petrographic analysis showed that BC particles, including coal, oxidized coal, metallurgical coke, depositional carbon, coal tar/pitch, cenosphere, and charcoal, comprised approximately 30% by volume of the organic fraction with size range of 250 μm-2000 μm from a typical floodplain soil. The BC particles with anthropogenic origin such as pitch and coke associated with the chloralkali production process served as both the source and subsequent transporter for the highly hydrophobic PCDD/Fs. These anthropogenic BC particles were enriched with high levels of PCDFs, containing approximately 1000-fold the concentration found in the bulk soil. The strong association of PCDD/Fs with anthropogenic BC directly impacts the physicochemical and biological availability thus the risk associated with these hydrophobic organochlorines in soils and sediments.     

固硫灰渣深度处理焦化废水的实验研究

选用同硫灰渣深度处理经生化处理后焦化废水,采用分光光度计法评价焦化废水的处理效果,采用XRD、XRF、SEM和IR等分析材料的成分、结构和微观形貌等.结果表明,固硫灰渣用量60 g/L、吸附时间15 min,焦化废水的脱色率可达94.22%,COD从原水的76.01 mg/L降低到处理后的5.76 mg/L,NH+4-...     

膜生物反应器处理生活污水无泡供氧的研究

用疏水性微孔膜制成的供氧器，向水溶液或发酵液供氧时，无气泡产生，这种无泡式供氧方式突破了传统的泡式供氧模式，具有传氧效率高，无泡沫产生和动力消耗低等优点。在膜生物反应器中用无泡式供氧进行生活污水处理试验研究。结果表明，COD，BOD5、NH3－N、浊度去除率分别达95％、94％和99％，对SS和大肠杆菌去除率达100％。     

精密模锻模具设计

先从三种角度 :锻造设备和工作条件 ,钢材的加热温度和凹模结构形式对精密模锻模具进行分类 ;然后从六个方面讨论精密模锻模具设计要点模膛设计 ,凹模尺寸设计和强度计算 ,凸模尺寸和强度计算 ,模具的导向装置 ,顶出装置及飞边槽尺寸的设计     

精密模锻件的设计要点

讨论了精密模锻件的分类密集形状的锻件、盘形锻件和长杆形锻件 ,以及精密模锻件的设计要点精密模锻件的机械加工余量、尺寸精度和表面粗糙度、分模面的选择、模锻斜度、圆角半径、肋的设计和腹板厚度的设计     

大辽河水系主要污染物特征分析

对大辽河流域主要污染物CODMn(或CODCr)和氨氮多年时空变化特征进行分析,认为二者浓度在空间上都有从上游到下游显著升高的趋势,年内变化呈现明显的点源特征。     

Indicating landfill stabilization state by using leachate property from Laogang Refuse Landfill

Variation and evolution process of leachate can be applied as a reference for landfill stabilization phase. In this work, leachates with different ages were collected from Laogang Refuse Landfill, and characterized with 14 key parameters. Simultaneously, principal component analysis （PCA） was applied to develop a synthetic parameter-F based on these 14 parameters, and a logarithm equation was simulated for the landfill stabilization process finally. It was predicted that leachates would meet Class I and Class II in standard for pollution control on the landfill site of municipal solid waste （GB 16889-1997） after 32 years and 22 years disposal under the natural attenuation in the humid and warm southern areas of China, respectively. The predication of landfill state would be more accurate and useful according to the synthetic parameter F of leachate from a working landfill.     

贵州万山汞矿地区耐汞野生植物研究

在贵州万山地区废弃汞矿堆和矿山附近,受长期高剂量汞暴露的影响经过的自然选择,该地区出现了一些能耐受汞毒性的生态型植物。对汞耐受及汞富集植物的筛选对于汞污染土壤的植物修复具有一定的现实意义。通过对万山梅子溪地区汞污染土壤及汞耐受植物采样调查发现,该区域采样土壤中汞的含量均在50 mg·kg-1以上,达到重度汞污染水平。对该地区野生植物的采样分析发现,蔷薇科植物悬钩子不仅数量较多,单株植物生物量较大,表现出很强的耐汞毒性的能力,而且植株内可以很大程度地富集汞,在其植株中汞的含量可达20 mg·kg-1左右,属于汞富集植物,另外发现野蒿对汞也具有较强的富集能力,其植株中汞的含量可达10 mg·kg-1以上。该类型植物的发现将为植物的汞耐受以及汞富集机理研究提供新的素材,为汞污染土壤的植物修复技术提供新的植物类型,也为进一步开发汞污染土壤处理技术提供了一种可能。     

燃煤型砷中毒病区尿砷甲基化代谢和砷致皮肤损伤危险度的关系初探

砷中毒具有特异的皮肤损伤特征。为了研究燃煤型砷中毒病区高砷暴露、人体甲基化代谢能力与皮肤损伤患病风险之间的关系,在陕南典型燃煤型砷中毒村进行了皮肤损伤诊断和流行病学调查,采集尿样并分析总砷及形态砷含量,同时计算了用于表征人体砷甲基化代谢能力的指标包括尿中无机砷、一甲基砷和二甲基砷占总砷的百分含量(i As%、MMA%、DMA%),以及一甲基化率(PMI=MMA/i As)和二甲基化率(SMI=DMA/MMA)。Logistic回归分析结果表明:尿总砷含量(UTAs)是砷致皮肤损伤的危险因素(OR=1.038,95%CI:1.003~1.073),二甲基砷百分含量和SMI是皮肤损伤的保护因素(OR=0.883,95%CI:0.798~0.976;OR=0.724,95%CI:0.535~0.978);且砷致皮肤损伤的危险度随砷暴露水平的增高和甲基化能力的降低而增大。