离子对烷基化法在2,4-D和2,4,5-T残留分析中的应用

有机阴离子可以和长碳链的季胺盐阳离子结合生成可溶于高介电常数有机溶剂的离子对.在此溶剂中,它可以和某些卤代烃发生复分解反应,生成季铵盐阳离子的卤化物及有机阴离子的相应烷基化物,故称离子对烷基化反应.此反应条件温和,转化率高,被广泛地应用于酸性及其它含活泼氢的有机化合物的烷基衍生物合成中.在这类有机物的分析中也得到应用.但尚未见应用于农药及其降解物残留分析中的报道. 2,4-D,2,4,5-T是典型的酸性有机农药,广泛用作农田除草剂.在二者的残留分析中,通常用CH_2N_2、BF_3CH_3OH、(CH_3)_2SO_4将它们烷基化,然后用气相色谱加以分析.近几年也有人用多卤素取代醇的BCl_3络合物或五氟苄基溴化物同Na_2CO_3作为     

建设项目实施过程中的可行性研究与环境影响评价

作者根据多年的工作实践，分析了目前建设项目可行性研究与环境影响评价工作中存在的一些问题。提出了编写环境影响评价报告时如何有效地利用建设项目的可行性研究报告文本，以及在没有可行性研究报告的情况下怎样使环境影响评价报告能够准确地反映建设项目的环境问题，进而保证环境影响报告书的质量。总之，恰当处理这两者之间的关系，保证建设项目在建设期与运营期降低与防止建设项目对周边环境影响是本文的主要目的之一。     

Strategies of a bark beetle, Pityogenes bidentatus, in an olfactory landscape

 Volatiles from leaves or bark of nonhost birch (Betula pendula) and Norway spruce (Picea abies) dramatically reduced the attraction of the bark beetle, Pityogenes bidentatus (Coleoptera: Scolytidae), to their aggregation pheromone components (cis-verbenol and grandisol) in the field. In addition, odors from both the needles and bark of the host Scots pine (Pinus sylvestris) similarly inhibited attraction. Monoterpenes of pine and spruce (α-pinene, β-pinene, terpinolene, and 3-carene) as well as ethanol, chalcogran and some nonhost green leaf alcohols [(Z)-3-hexen-1-ol, (E)-2-hexen-1-ol, and 1-hexanol], also reduced catches. Collections of volatiles from the field-tested plant tissues indicated they released monoterpenes in amounts similar to the synthetics that inhibited responses. The various plant and insect sources of these inhibitory compounds indicate that P. bidentatus bark beetles have evolved several strategies to increase their fitness by avoiding nonhost and unsuitable host trees in a complex olfactory landscape. Received: 6 June 2000 / Accepted in revised form: 25 September 2000     

再论次生石英岩型非金属矿床

次生石英岩型非金属矿床明显受不同级别的火山构造控制,是中—酸性火山岩区一套很有特色的矿床组合;热源、水源、地层产状有机组合生成的环流热液是成矿的前提之一;成矿流体以重碳酸盐型、硫酸盐型为主,属中—低盐度热液;温度、pH值、fo_2等物理化学条件是矿床及矿种类刑的重要控制因素。本文在《次生石英岩容矿型非金属矿床系列的矿种、组合及其成矿作用特征》(1986)一文基础上,进一步总结这类矿床的成矿机理和地质地球化学模式。     

Dynamic fate modeling of γ-hexachlorocyclohexane in the lower reaches of the Liao River

A QWASI model dependent on temperature is parameterized to describe the long-term fate of persistent organic pollutants (POPs) in the Liao River. The model parameters, namely fugacity capacity, degradation rate, and transfer coefficient, are profoundly affected by temperature. This model is used to simulate the fate of γ-hexachlorocyclohexane (γ-HCH) in the lower reaches of the Liao River from 1998 to 2008. Modeling results show that γ-HCH fugacity capacities in air, water, and sediment increase as temperature decreases, and the transfer and transformation rate coefficients increase as temperature increases. The variations of transfer and transformation parameter D values depend on fugacity capacities, and transfer and transformation coefficients simultaneously. The performance of the model is evaluated by comparing the predicted and observed concentrations in the water and sediment of the Liao River. The predicted values agree well with the observed value in the order of magnitude, in most cases within the factor of 3. It is believed that the model is appropriate for simulating the long term fate of POPs in the Liao River. Translated from Environmental Science, 2006, 27(1): 121–125 [译自: 环境科学]     

Atmospheric particulate pollution of Lanzhou using magnetic measurements

１　ＩｎｔｒｏｄｕｃｔｉｏｎＡｔｍｏｓｐｈｅｒｉｃｐａｒｔｉｃｕｌａｔｅｉｓｏｎｅｏｆｔｈｅｍａｉｎａｔｍｏｓｐｈｅｒｉｃｐｏｌｌｕｔａｎｔｓｉｎＣｈｉｎａ．Ｉｔｍａｙｂｅｈａｒｍｆｕｌｉｔｓｅｌｆａｎｄｃａｎａｃｔａｓａｃａｒｒｉｅｒｏｆｔｏｘｉｃｍａｔｔｅｒｓｗｈｉｃｈｍａｙｈａｖｅｒｅｍａｒｋａｂｌｅｉｍｐａｃｔｓｏｎｈｕｍａｎｈｅａｌｔｈａｎｄａｔｍｏｓｐｈｅｒｉｃｅｎｖｉｒｏｎｍｅｎｔｑｕａｌｉｔｙ．Ｃｏｍｂｕｓｔｉｏｎｏｆｃｏａｌ，ｗｈｉｃｈｓｔｉｌｌｓｅｒｖｅｓａｓｐｒｉｍａｒｙｅ…     

室内培养底栖端足类日本大螯蜚饵料研究

本文在实验条件下探讨了５种饵料对海洋底栖端足类日本大螯蜚的培养效果。实验指标为存活率，生长速度，日增长率和发育状况。结果表明，青岛大扁藻与新月菱形藻１：１混合液的培养效果最佳，合成饲料是较好的补充饵料，螺旋藻粉不宜作为日本大螯蜚的培养饵料。动物性饵料培养效果不如植物性饵料，但对日本大螯蜚的早期快速成长具有一定的促进作用。     

六六六在水溶液中的光异构化与光化学降解

以高压汞灯为光源,研究了六六六(BHC)在水溶液中的光解。在水溶液中,除α-BHC外,BHC的光化学降解与光异构化是同时发生的。光异构化规律是:分子中一个氯原子改变其原来构象而朝着形成对光更加稳定的异构体转化。经色质谱联用鉴定,证明氯苯、二氯苯、四氯环己烯、一氯酚、二氯酚、三氯酚及三氯环己烯醇为BHC在水溶液中的光解产物。提出了包含还原脱氯和羟基取代的这一光解反应的历程。     

微机上冲裁CAD系统的开发

此文介绍了一套在微机上开发的冲裁CAD系统。它以Foxbase作为数据库管理系统,Trubo C为编程语言,能进行冲裁件图形输入与显示、工艺性分析、优化单排排样和选择板材规格、冲裁件尺寸识别和模具刃口尺寸计算、冲裁力和压力中心计算、以及凹模周界尺寸计算等。本系统主界面为下拉式菜单界面,全中文提示,人机界面友好,具有较好的可扩充性和容错性。