Identification of close relationship between atmospheric oxidation and ozone formation regimes in a photochemically active region

Understanding ozone (O₃) formation regime is a prerequisite in formulating an effective O₃ pollution control strategy. Photochemical indicator is a simple and direct method in identifying O₃ formation regimes. Most used indicators are derived from observations, whereas the role of atmospheric oxidation is not in consideration, which is the core driver of O₃ formation. Thus, it may impact accuracy in signaling O₃ formation regimes. In this study, an advanced three-dimensional numerical modeling system was used to investigate the relationship between atmospheric oxidation and O₃ formation regimes during a long-lasting O₃ exceedance event in September 2017 over the Pearl River Delta (PRD) of China. We discovered a clear relationship between atmospheric oxidative capacity and O₃ formation regime. Over eastern PRD, O₃ formation was mainly in a NO_x-limited regime when HO₂/OH ratio was higher than 11, while in a VOC-limited regime when the ratio was lower than 9.5. Over central and western PRD, an HO₂/OH ratio higher than 5 and lower than 2 was indicative of NO_x-limited and VOC-limited regime, respectively. Physical contribution, including horizontal transport and vertical transport, may pose uncertainties on the indication of O₃ formation regime by HO₂/OH ratio. In comparison with other commonly used photochemical indicators, HO₂/OH ratio had the best performance in differentiating O₃ formation regimes. This study highlighted the necessities in using an atmospheric oxidative capacity-based indicator to infer O₃ formation regime, and underscored the importance of characterizing behaviors of radicals to gain insight in atmospheric processes leading to O₃ pollution over a photochemically active region.     

Preparation and characterization of boron-doped corn straw biochar: Fe (Ⅱ) removal equilibrium and kinetics

Nowadays, iron ions as a ubiquitous heavy metal pollutant are gradually concerned and the convenient and quick removal of excessive iron ions in groundwater has become a major challenge for the safety of drinking water. In this study, boron-doped biochar (B-BC) was successfully prepared at various preparation conditions with the addition of boric acid. The as-prepared material has a more developed pore structure and a larger specific surface area (up to 897.97 m²/g). A series of characterization results shows that boric acid effectively activates biochar, and boron atoms are successfully doped on biochar. Compared with the ratio of raw materials, the pyrolysis temperature has a greater influence on the amount of boron doping. Based on Langmuir model, the maximum adsorption capacity of 800B-BC_1:2 at 25 °C, 40 °C, 55 °C are 50.02 mg/g, 95.09 mg/g, 132.78 mg/g, respectively. Pseudo-second-order kinetic model can better describe the adsorption process, the adsorption process is mainly chemical adsorption. Chemical complexation, ions exchange, and co-precipitation may be the main mechanisms for Fe²⁺ removal.     

工业污水水质在线监测系统研究与推广应用

为了加强对污染源的监控,准确地掌握污染物排放情况,中国石油天然气股份有限公司组织开展了水质在线监测系统研究,并逐步建立了污染源在线监测系统。文章介绍了有关水质在线监测系统的研究现状以及研究成果应用和推广情况。     

利用助剂法降低催化裂化再生烟气SOx排放

由于加工原油重质比，SOx排放问题日益严重，为满足环保法规要求，我们应用了硫转移助剂，并进行了相关的技术及经济分析。     

Centrifugal study of zone of influence during air-sparging

Air sparging (AS) is one of the groundwater remediation techniques for remediating volatile organic compounds (VOCs) in saturated soil. However, in spite of the success of air sparging as a remediation technique for the cleanup of contaminated soils, to date, the fundamental mechanisms or the physics of air flow through porous media is not well understood. In this study, centrifugal modeling tests were performed to investigate air flow rates and the evolution of the zone of influence during the air sparging under various g-levels. The test results show that with the increase in sparging pressure the mass flow rate of the air sparging volume increases. The air mass flow rate increases linearly with the effective sparging pressure ratio, which is the difference between sparging pressure and hydrostatic pressure normalized with respect to the effective overburden pressure at the sparging point. Also the slope of mass flow rate with effective sparging pressure ratio increases with higher g-levels. This variation of the slope of mass flow rate of air sparging volume versus effective sparging pressure ratio, M, is linear with g-level confirming that the air flow through soil for a given effective sparging pressure ratio only depends on the g-level. The test results also show that with increasing sparging pressure, the zone of influence (ZOI), which consists of the width at the tip of the cone or lateral intrusion and the cone angle, will lead to an increase in both lateral intrusion and the cone angle. With a further increase in air injection pressure, the cone angle reaches a constant value while the lateral intrusion becomes the main contributor to the enlargement of the ZOI. However, beyond a certain value of effective sparging pressure ratio, there is no further enlargement of the ZOI.     

Dissolution behavior of nutrient elements from dephosphorization slag in the weakly acidic solution

Journal of Material Cycles and Waste Management - Dephosphorization slag is primarily composed of CaO–SiO2–FeO–P2O5 slag system. As it contains abundant valuable components,...     

Improving protected area effectiveness through consideration of different human-pressure baselines

Previous assessments of the effectiveness of protected areas (PAs) focused primarily on changes in human pressure over time and did not consider the different human-pressure baselines of PAs, thereby potentially over- or underestimating PA effectiveness. We developed a framework that considers both human-pressure baseline and change in human pressure over time and assessed the effectiveness of 338 PAs in China from 2010 to 2020. The initial state of human pressure on PAs was taken as the baseline, and changes in human pressure index (HPI) were further analyzed under different baselines. We used the random forest models to identify the management measures that most improved effectiveness in resisting human pressure for the PAs with different baselines. Finally, the relationships between the changes in the HPI and the changes in natural ecosystems in PAs were analyzed with different baselines. Of PAs with low HPI baselines, medium HPI baselines, and high HPI baselines, 76.92% (n=150), 11.11% (n=12), and 22.86% (n=8) , respectively, showed positive effects in resisting human pressure. Overall, ignoring human-pressure baselines somewhat underestimated the positive effects of PAs, especially for those with low initial human pressure. For PAs with different initial human pressures, different management measures should be taken to improve effectiveness and reduce threats to natural ecosystems. We believe our framework is useful for assessing the effectiveness of PAs globally, and we recommend it be included in the Convention on Biological Diversity Post-2020 Strategy.     

Blockchain technology-based sustainable management research: the status quo and a general framework for future application

Environmental Science and Pollution Research - The problems of data leakage and unreliable information transfer in the management process make sustainability management an inevitable need for...     

Prefabrication decisions of the construction supply chain under government subsidies

Environmental Science and Pollution Research - Prefabrication has been generating increasing interest as a cleaner production strategy to promote sustainable development. Alongside this trend,...     

Influence of different inoculation densities of black soldier fly larvae (Hermetia illucens) on heavy metal immobilization in swine manure

The disposal of organic waste by the biocomposting of black soldier fly larvae (BSFL) has drawn broad attention. However, the discrepancies in heavy metal immobilization between BSFL biocomposting with different inoculation densities and aerobic composting need to be further researched. In this study, BSFL with inoculation densities of 0.08%, 0.24% and 0.40% was added to swine manure to investigate its influence on heavy metal bioaccumulation and bioavailability. The physicochemical properties, BSFL growth performance and amino acid contents were measured. The results showed that the germination index, total prepupal yield and bioavailable fraction removal rate (%) of Cr and Pb at an inoculation density of 0.40% of BSFL were the highest among all of the BSFL biocomposting groups. Although the bioaccumulation factor and heavy metal (Cd, Cr, Cu and Zn) concentrations of the BSFL body from swine manure with inoculation densities of 0.24% and 0.40% of BSFL were similar, the BSFL inoculation density of 0.40% had the best absorption effect on these heavy metals in terms of total prepupal yield. Therefore, this study provides a basis for exploring the optimal inoculation density of BSFL biocomposting to reduce the harmful effects of heavy metals in swine manure.