Immune responses,DNA damage and ultrastructural alterations of gills in the marine mussel Lithophaga lithophaga exposed to CuO nanoparticles

Environmental Science and Pollution Research - Nanoparticle (NP) pollution is a worldwide problem. Copper oxide nanoparticles (CuO NPs) are one of the most used NPs in a variety of applications,...     

The Distribution and Sources of Polycyclic Aromatic Hydrocarbons in Surface Sediments Along the Egyptian Mediterranean Coast

Coastal marine sediment samples were collected from 31 sampling stations along the Egyptian Mediterranean Sea coast. All sediment samples were analyzed to determine aliphatic and polycyclic aromatic hydrocarbons (PAHs) as well as total organic carbon (TOC) contents and grain size analysis. Total concentrations of 16 EPA-PAHs in the sediments were varied from 88 to 6338 ng g⁻¹ with an average value of 154 ng g⁻¹ (dry weight). However, the concentrations of total aliphatic were varied from 1.3 to 69.9 ng g⁻¹ with an average value of 15.6 ng g⁻¹ (dry weight). The highest contents of PAHs were found in the Eastern harbor (6338 ng g⁻¹), Manzala (5206 ng g⁻¹) and El-Jamil East (4895 ng g⁻¹) locations. Good correlations observed between a certain numbers of PAH concentrations allowed to identify its origin. The average total organic carbon (TOC) percent was varied from 0.91 to 4.54%. Higher concentration of total pyrolytic hydrocarbons (∑COMB) than total fossil hydrocarbons (∑PHE) declared that atmospheric fall-out is the significant source of PAHs to marine sediments of the Egyptian Mediterranean coast. The selected marked compounds, a principal component analysis (PCA) and special PAHs compound ratios (phenanthrene/anthracene vs fluoranthene/pyrene; ∑COMB/∑EPA-PAHs) suggest the pyrogenic origins, especially traffic exhausts, are the dominant sources of PAHs in most locations. Interferences of rather petrogenic and pyrolytic PAH contaminations were noticed in the harbors due to petroleum products deliveries and fuel combustion emissions from the ships staying alongside the quays.     

The effect of pH on zinc adsorption equilibria and exchangeable zinc pools in soils

Zinc adsorption equilibria were measured in soils differing in pH but with similar textures and total zinc concentrations, using adsorption isotherm and isotopic exchange techniques. The results suggested that the equilibrium between solution and exchangeable zinc was strongly pH dependent and the active zinc species in adsorption was single charged (e.g. Zn(OH)(+)). The size of the exchangeable zinc pool was not strongly pH dependent. Similar results were obtained when zinc was added to the soils, either as Zn(NO(3))(2) or in sewage sludge.     

Effects of sewage sludge amendments on pesticide sorption and leaching through undisturbed Mediterranean soils

The Gharb region in Morocco is an important agricultural zone where soils receive pesticide treatments and organic amendments to increase yields. The groundwater aquifer in the Gharb region is relatively shallow and thus vulnerable. The objective of this work was to study the influence of organic amendments on diuron, cyhalofop-butyl and procymidone leaching through undisturbed soil columns. Two soils were sampled from the Gharb region, a Dehs (sandy soil) and a R’mel (loamy clay soil). Following elution (124.5 mm), the amount of pesticide residues in the leachates of the sandy soil (0.06–0.21 %) was lower than in those of the loamy clay soil (0.20–0.36 %), which was probably due to preferential flow through the loamy clay soil. The amount of procymidone leached through the amended soil columns was greater than the control for the sandy soil only. The organic amendments did not significantly influence diuron and cyhalofop-butyl leaching in either of the soils. The application of organic amendments affected the amounts of dissolved organic matter (DOM) eluted and thus pesticide leaching as a function of soil-type. Nevertheless, in some case, the formation of pesticide-DOM complexes appeared to promote pesticide leaching, thus increasing groundwater contamination risks.     

Restoring the plant productivity of heavy metal-contaminated soil using phosphate sludge, marble waste, and beneficial microorganisms

Assisted natural remediation (ANR) has been highlighted as a promising, less expensive, and environmentally friendly solution to remediate soil contaminated with heavy metals. We tested the effects of three amendments (10% compost, C; 5 or 15% phosphate sludge, PS5 and PS15; and 5 or 15% marble waste, MW5 and MW15) in combination with microorganism inoculation (rhizobacteria consortium alone, mycorrhizae alone, and the two in-combination) on alfalfa in contaminated soil. Plant concentrations of Zn, Cu, and Pb were measured, along with proline and malondialdehyde production. The microbiological and physicochemical properties of the mining soil were evaluated. Application of the amendments allowed germination and promoted growth. Inoculation with the rhizobacteria consortium and/or mycorrhizae stimulated plant growth. PS and MW stimulated the production of proline. Inoculation of alfalfa with the rhizobacteria-mycorrhizae mixture and the application of MW allowed the safe cultivation of the legume, as shown by the low concentrations of metals in plant shoots. Zn and Pb concentrations were below the limits recommended for animal grazing and accumulated essentially in roots. Soil analyses showed the positive effect of the amendments on the soil physicochemical properties. All treatments increased soil pH (around 7), total organic carbon, and assimilable phosphorus content. Notably, an important decrease in soluble heavy metals concentrations was observed. Overall, our findings revealed that the applied treatments reduced the risk of metal-polluted soils limiting plant growth. The ANR has great potential for success in the restoration of polymetallic and acidic mining soils using the interaction between alfalfa, microorganisms, and organo-mineral amendments.     

Process control in municipal solid waste incinerators: survey and assessment.

As there is only rare and scattered published information about the process control in industrial incineration facilities for municipal solid waste (MSW), a survey of the literature has been supplemented by a number of waste incineration site visits in Belgium and The Netherlands, in order to make a realistic assessment of the current status of technology in the area. Owing to the commercial character, and therefore, the confidentiality restrictions imposed by plant builders and many of the operators, much of the information collected has either to be presented in a generalized manner, and in any case anonymously. The survey was focused on four major issues: process control strategy, process control systems, monitors used for process control and finally the correlation between the 850 degrees C/2 s rule in the European waste incineration directive and integrated process control. The process control strategies range from reaching good and stable emissions at the stack to stabilizing and maximizing the energy output from the process. The main indicator to be monitored, in cases in which the focus is controlling emissions, is the oxygen content in the stack. Keeping the oxygen concentration in a determined range (usually between 8 and 12 vol.%) ensures stable and tolerated concentrations of the gaseous emissions. In the case for which stabilization of energy production is the principal aim, the main controlled parameter is the steam temperature and flow-rate, which is usually related to the fuel energetic input. A lot of other parameters are used as alarm criteria, the most common of which is the carbon monoxide concentration. The process control systems used most commonly feature partially automated classical proportional integral derivative (PID) controllers. New and innovative process control systems, such as fuzzy-logic control systems, are still unknown to most plant managers while their performance is reported to be unsatisfactory in plants in which such systems have been tested or are in use. Monitoring components used in process control are still based on classical tools such as thermocouples. The use of modern and more reliable sensors is very limited due to the high initial investment cost or simply the fear of using non-standard technologies. Complying with the 850 degrees C/2 s rule in the European waste incineration directive generally is seen to be a handicap for the process control, either in terms of cost, or flexibility of reaction, or both, particularly in old incineration facilities where such restrictions were not planned in the design.     

Inorganic mercury and methylmercury in surface sediments and mussel tissues from a microtidal lagoon (Bizerte, Tunisia)

The aim of this study was to investigate the distribution of mercury compounds in marine sediments and mussel tissues collected in the lagoon of Bizerte, Tunisia, during two seasons (summer and winter). Inorganic mercury (Hg²⁺) concentrations in sediments were found to be highly variable, ranging from 0.04 nmol.g¹ to 3.22 nmol.g⁻¹ (dry weight) with a mean value of 0.52 nmol.g⁻¹. Anthropogenic sources of Hg²⁺, most probably metallurgy or tire production industries, have been evidenced. The mean concentration of monomethylmercury (MeHg⁺) in the surface sediments is 2.32 pmol g⁻¹ ranging from below the detection limit (0.45 pmol.g⁻¹) to 14.6 pmol.g⁻¹. No significant variation was observed between winter and summer seasons for both mercury species concentration in the sediments. The Hg²⁺ concentrations in mussel tissues are also variable, ranging from 0.007 to 1.347 nmol.g⁻¹ (dry weight). The mean concentration is 0.70 nmol.g⁻¹. In these tisssues, Hg²⁺ is generally the major compound, making up ca. 88% of total mercury concentrations. However, methylmercury concentrations are significant and homogeneous, ranging from 62 to 121 pmol.g⁻¹ (mean 96 pmol.g⁻¹). The results suggest that a fraction of the inorganic mercury load in the sediments of the lagoon undergoes methylation pathways. MeHg⁺ produced is assimilated in the mussels more readily than Hg²⁺.     

Effects of cyanobacteria producing microcystins on seed germination and seedling growth of several agricultural plants

The effects of cyanobacteria aqueous extracts containing Microcystin-LR (MC-LR) on the seed germination and growth of Pisum sativum, Lens esculenta, Zea mays and Triticum durum were investigated. Experiments were carried out on a range of doses of the extract (equivalent to 0, 1.6, 2.9, 5.8, 8.7 and 11.6 μ g MC-LR/mL). The results confirm that these plants were sensitive to cell-free extracts of a toxic Microcystis and that germination inhibition was dose dependent. One-way analysis of variance (ANOVA) showed that P. sativum is the most sensitive tested species with a 97% germination rate reduction and L. esculenta was the most resistant. At the 8th day, the exposure to the microcystins (MC) resulted in a significant decrease of plant epicotyls length, roots length and a net inhibition of lateral root formation. It is concluded that MC could affect also terrestrial plants seedling germination and growth. Therefore, the use of water for irrigation contaminated by MC could exert negative biochemical effects on seed and plant metabolism which might influence the agricultural crops.