Comparative Toxicities of Polar and Non-Polar Organic Fractions From Sediments Affected By the Exxon Valdez Oil Spill in Prince William Sound, Alaska

Standardized tests were applied to aromatic and polar fractions of sediment extracts to determine whether polar constituents or oxidative degradation products contributed significantly to the toxicity of sediments oiled by the Exxon Valdez spill. Intertidal sediment and pore-water samples were collected in September 1990 from two heavily oiled sites and an unoiled site in Prince William Sound (PWS). Methylene chloride extracts from these samples were fractionated by liquid chromatography into aliphatic, aromatic and polar fractions, and the aromatic and polar fractions were tested for toxicity using the Microtox^R test, bivalve larval mortality and development (Mytilus); several measures of genotoxicity in Mytilus, including SOS Chromotest^R, anaphase aberrations and sister chromatid exchange; and survival, anaphase aberrations and teratogenicity in coho salmon (Onchorhynchus kisutch). Microtox^R and SOS Chromotest^R protocols were applied in a screening mode to all samples, whereas other tests were applied only to selected fractions from two sites. Samples from Bay of Isles (oiled) were consistently more toxic (usually only 2 to 5-fold) than the Mooselips Bay (unoiled) samples, which gave very low responses in all tests. for both sites, however, responses to polar and aromatic fractions were about the same in most tests, suggesting that while the overall toxicity of the oil was low in these samples, at least part of that toxicity was derived from polar constituents. Compared to the parent hydrocarbons, polar oxidation products partition preferentially into pore-water and are more rapidly diluted and dispersed in the water column. These results suggest that polar oxidation products of petroleum hydrocarbons pose little risk to marine organisms, except possibly for infauna continuously exposed to pore-water in heavily oiled sediments. Independent surveys showed that sediment toxicity in PWS declined during 1989-1991 to near background levels, in accord with previous understanding of oil weathering and toxicity.     

Optimization of the high-pressure, near-critical liquid-based microsortation of recyclable post-consumer plastics

High-pressure, near-critical liquids were used as float-sink separation media for the microsortation of polyolefin mixtures and PET/PVC mixtures. Near-critical carbon dioxide was used for the refinement of the polyolefins, and sulfur hexafluoride was used to separate post-consumer PVC from PET. Preliminary experiments indicated that there was no overlap in the density ranges of post-consumer HDPE, LDPE and PP containers. There was no overlap in the PET and PVC densities, with the exception of a single PVC packaging material with a density in the PET range. These initial results indicated that a float-sink separation was a viable means of microsortation. Separations of 91% LDPE (1/8′ beads)/9% PP (1/8′ chopped strands) resin mixtures and mixed post-consumer polyolefin flakes were then conducted in a laboratory-scale, 1-I batch apparatus. This apparatus not only permitted the observation of the separation, but also enabled the separated fractions to be removed from the high-pressure environment. The results indicated that LDPE purity of greater than 98.9% was obtained in 3 min or less if (a) the fluid density was 0.018 g/cm³ greater than the PP density and only 0.002 g/cm³ less than the LDPE density, thereby providing the greatest buoyancy force for the removal of the PP, (b) the fluid was recirculated upward through the bed of mixed plastics, facilitating the upward movement of the PP, and (c) the loading was kept at levels below 40% by volume. HDPE purity of 99% was also attained with clean, dry, post-consumer mixed plastic flakes. The loadings for these separations were very low, however, due to the difficulty in agitating the mixed bed of plastics using fluid recirculation. An economic analysis of these microsortation processes indicated that the value of the sorted plastics relative to the mixed feed must increase by approx. $0.08/lb for the CO₂-based separation and approx. $0.27/lb for the SF₆-based separation to justify the implementation of these high-pressure processes.     

Methods for evaluating investment strategies for environmental technologies

Environmental technology development, like other ventures, requires decisions regarding where to invest scarce capital. The investment option that offers the greatest benefit relative to the cost should be chosen. The problem is to determine a way to analyze the project and apply a useful measure for comparison to other investment opportunities. In this article, three methods of analysis are presented: return on investment, benefit-to-cost ratio, and payback period. Formulas are developed for each of the methods, and a case study illustrates their application.     

Discrete modelling of supply response under uncertainty: The case of the fishery

In the absence of complete control in a regulated industry, effective management requires prediction of firms' behavioral responses to public policy. This paper develops a discrete choice model of supply response under uncertainty and applies it to fishery choice problems of New England fishing firms. While fishermen demonstrate a bias towards remaining within the same fishery, sufficient incentives, in terms of changes in expected returns and risk, are shown to elicit response. Due to extreme uncertainty concerning population dynamics of fish stocks, a satisficing approach to management, facilitated by this type of modelling, may be more appropriate than bioeconomic optimization.     

The behavioral component in the meaning of places

How do people think about the physical setting in the world around them? Part of the answer to this question may be in terms of the behaviors that occur there. To explore people's knowledge of behavior—place associations, twenty places (shown via color photographs) were assessed in five ways: (a) ratings of the place's suitability for each of eleven behaviors, (b) ratings of the expected frequency of occurrence of the eleven behaviors, (c) free listings of reasons for going to each place, (d) free listings of activities-while-there and (e) free listings of activities associated with the place. Results showed that people can distinguish places on the basis of behaviors, that the behavioral component of place meaning is composed of distinct aspects, and that knowledge of behavior is related to a global, overall representation of a place.     

The Southeastern Aerosol Research and Characterization Study: Part II. Filter-based measurements of fine and coarse particulate matter mass and composition

The Southeastern Aerosol Research and Characterization Study (SEARCH) was implemented in 1998-1999 to provide data and analyses for the investigation of the sources, chemical speciation, and long-term trends of fine particulate matter (PM2.5) and coarse particulate matter (PM10-2.5) in the Southeastern United States. This work is an initial analysis of 5 years (1999-2003) of filter-based PM2.5 and PM10-2.5 data from SEARCH. We find that annual PM2.5 design values were consistently above the National Ambient Air Quality Standards (NAAQS) 15 microg/m3 annual standard only at monitoring sites in the two largest urban areas (Atlanta, GA, and North Birmingham, AL). Other sites in the network had annual design values below the standard, and no site had daily design values above the NAAQS 65 microg/m3 daily standard. Using a particle composition monitor designed specifically for SEARCH, we found that volatilization losses of nitrate, ammonium, and organic carbon must be accounted for to accurately characterize atmospheric particulate matter. In particular, the federal reference method for PM2.5 underestimates mass by 3-7% as a result of these volatilization losses. Organic matter (OM) and sulfate account for approximately 60% of PM2.5 mass at SEARCH sites, whereas major metal oxides (MMO) and unidentified components ("other") account for > or = 80% of PM10-2.5 mass. Limited data suggest that much of the unidentified mass in PM10-2.5 may be OM. For paired comparisons of urban-rural sites, differences in PM2.5 mass are explained, in large part, by higher OM and black carbon at the urban site. For PM10, higher urban concentrations are explained by higher MMO and "other." Annual means for PM2.5 and PM10-2.5 mass and major components demonstrate substantial declines at all of the SEARCH sites over the 1999-2003 period (10-20% in the case of PM2.5, dominated by 14-20% declines in sulfate and 11-26% declines in OM, and 14-25% in the case of PM10-2.5, dominated by 17-30% declines in MMO and 14-31% declines in "other"). Although declining national emissions of sulfur dioxide and anthropogenic carbon may account for a portion of the observed declines, additional investigation will be necessary to establish a quantitative assessment, especially regarding trends in local and regional emissions, primary carbon emissions, and meteorology.     

Graduated driver licensing research in 2004 and 2005

This is the second update of research on graduated driver licensing (GDL) and teenage drivers. It briefly summarizes research in progress and research published since the January 2004 update (Hedlund, J. & Compton, R. [2004]. Graduated driver licensing research in 2003 and beyond. Journal of Safety Research 35(1), 5-11). Research has been very active, especially on teenage driver risk factors, GDL program evaluations, the role of parents in managing and training their teenage drivers, and driver education. Results have strengthened the case for GDL, for nighttime and passenger restrictions, and for extended supervised driving practice.