基于安全度与运营格局的油库选址优先级评价方法研究

从安全性和运营角度对油库选址的影响因素及评价指标分析对油库的安全稳定及有效运营具有重要的意义。该文选取与安全和运营有关的人口企业数量、安全管理能力、消防设施规划、地形地质条件、铁路公路数量、市场投资收益、政策支持情况等影响因子进行重要性及合理程度分析,综合运用安全度与运营格局影响因素多元耦合关系,构建了油库区安全与运营评价体系,改进了原有的模糊层次法评价模型,并对某油库区安全度与运营格局进行了评估验证。结果表明:利用改进模糊层次法能够较好地评价不同地址的优先级,评价模型具有一定应用性,能够对不同地址的特点及评价权重进行有效分析,可见油库选址优先级评价方法是实用且有效的。该研究方法及结果可以为油库区地址的优选提供一定参考与建议。     

Concentrations and accumulation rates of polychlorinated biphenyls in soil along an urban–rural gradient in Shanghai

Environmental Science and Pollution Research - This study proposed an in situ soil experimental system to quantify concentration and accumulation rates of polychlorinated biphenyl (PCB) congeners...     

Compression behaviors of mechanically biologically treated wastes of Tianziling landfill in Hangzhou,China

Environmental Science and Pollution Research - This study aimed to investigate the compression behaviors of mechanically biologically treated (MBT) wastes. For this purpose, the short-term...     

磷矿浆催化氧化湿法脱硝研究

采用液相催化氧化NO_x的方法,通过磷矿浆中过渡金属离子的催化作用,达到净化电厂烟气中NO的目的。考察了烟气含氧量、吸收温度、磷矿浆固液比及气体流量对磷矿浆湿法脱硝的影响。结果表明,试验最佳条件为NO进口质量浓度670 mg/m~3、磷矿浆吸收温度25℃、固液比500 g/L、流量0.3 L/min、含氧量20%;优化条件下的磷矿浆脱除效率最高可达88.9%。随着磷矿浆湿法催化氧化脱硝反应的进行,p H值不断下降,导致磷矿浆逐渐失效,需补入新鲜矿浆,维持吸收液的p H值以保证良好脱硝率。     

基于GIS与栅格数据的安徽省人居环境自然适宜性测评

科学度量人居环境自然背景的适宜性,有助于合理引导人口分布与流动,促进区域人口、资源环境协调发展。运用GIS技术,以250 m×250 m栅格为基本单元,选取气候、地形、水文、地被、自然灾害等因子,构建人居环境自然适宜性评价模型,定量测评安徽省人居环境自然适宜程度,剖析各类型区的适宜性和限制性。研究表明：安徽省人居环境指数介于33.64～74.58之间,人居环境自然适宜性总体较好,绝大部分地区适宜人类居住,适宜性在空间上大体呈现南高北低的态势,与现有人口分布格局相反。一般适宜区面积最广,占安徽省总面积的46.08%;比较适宜区次之,占31.29%;高度适宜区占22.54%;临界适宜区面积最小,仅占0.08%。安徽省近61.16%的人口分布在一般适宜区,高度适宜区与比较适宜区人口所占比例不足40%,临界适宜区人口极为稀少。地形起伏度和水文指数是造成全省人居环境自然适宜性分异的主要因子,测评结果较为客观地反映了安徽省人居环境的自然本底。全省人口生存与发展的空间较大,人口流动与集聚的适宜范围较广。 关键词： 人居环境;自然适宜性;栅格;GIS;安徽省     

植物内重金属的赋存形态及分布特征分析方法研究进展

植物内重金属分析不仅有助于阐述重金属迁移转化规律,揭示植物修复机理,也是监测评价大气、水及土壤环境重金属污染状况的重要依据。研究针对植物样品中重金属赋存形态及分布特征的分析方法进行综述,分别介绍了其原理、优缺点及应用。提出制定统一高效的分析检测方法,深化植物内重金属的赋存形态及分布特征与环境相关性的研究以及建立数据共享平台是植物样品重金属信息分析方法的未来发展方向。     

A mini review of fluoride-induced apoptotic pathways

Fluorine or fluoride can have toxic effects on bone tissue and soft tissue at high concentrations. These negative effects include but not limited to cytotoxicity, immunotoxicity, blood toxicity, and oxidative damage. Apoptosis plays an important role in fluoride-induced toxicity of kidney, liver, spleen, thymus, bursa of Fabricius, cecal tonsil, and cultured cells. Here, apoptosis activated by high level of fluoride has been systematically reviewed, focusing on three pathways: mitochondrion-mediated, endoplasmic reticulum (ER) stress-mediated, and death receptor-mediated pathways. However, very limited reports are focused on the death receptor-mediated apoptosis pathways in the fluoride-induced apoptosis. Therefore, understanding and discovery of more pathways and molecular mechanisms of fluoride-induced apoptosis may contribute to designing measures for preventing fluoride toxicity.     

Adsorptive conversion of nitrogen dioxide from etching vent gases over activated carbon

Some metal etching operations emit limited flow rates of waste gases with reddish-brown NO₂ fume, which may cause visual and acidic-odor complaints, as well as negative health effects. In this study, tests were performed by passing caustic-treated waste gases vented from Al-etching operations through columns packed either with virgin or regenerated granular activated carbon (GAC) to test their adsorptive conversion performance of NO₂ in the gases. The gases contained 5–55 ppm NO₂ and acetic and nitric acids of below 3 ppm. Exhausted carbon was regenerated by scrubbing it with caustic solution and water, and dried for further adsorption tests. Results indicate that with an (empty bed residence time (EBRT) of 0.15 sec for the gas through the GAC-packed space, around 60% of the influent NO₂ of 54 ppm could be removed, and 47% of the removed NO₂ was converted by and desorbed from the carbon as NO. GAC used in the present study could be regenerated at least twice to restore its capacity for NO₂ adsorption. Within EBRTs of 0.076–0.18 sec, the adsorptive conversion capacity was linearly varied with EBRT. In practice, with an EBRT of 0.20 sec, a conversion capacity of 0.80 kg NO₂ (kg GAC)^?1 with an influent NO₂ of 40 ppm can be used as a basis for system design.

Implications: Some metal etching operations emit waste gases with reddish-brown (yellow when diluted) NO₂ fume which may cause visual and acidic-odor complaints, as well as negative health effects. This study provides a simple process for the adsorptive conversion of NO₂ in caustic-treated waste gases vented from metal-etching operations through a GAC column. With an EBRT of 0.20 sec, a conversion capacity of 0.80 kg NO₂ (kg GAC)^?1 with an influent NO₂ of 40 ppm can be used as a basis for system design. Saturated GAC can be regenerated at least twice by simply scrubbing it with aqueous caustic solution.     

Analysis of 3-year observations of CFC-11, CFC-12 and CFC-113 from a semi-rural site in China

In-situ measurements of atmospheric chlorofluorocarbons (CFCs) can be used to the assess their global and regional emissions and to check for compliance with phase-out schedules under Montreal protocol and its amendments. The atmospheric mixing ratios of CFC-11 (CCl₃F), CFC-12 (CCl₂F₂) and CFC-113 (CCl₂F–CClF₂) have been measured by an automated in-situ GC-ECDs system at the regional Chinese Global Atmosphere Watch (GAW) station Shangdianzi (SDZ), from November 2006 to October 2009. The time series for these three principal CFCs showed large episodic events and background conditions occurred for approximately 30% (CFC-11), 52% (CFC-12) and 56% (CFC-113) of the measurements. The mean background mixing ratios for CFC-11, CFC-12 and CFC-113 were 244.8 ppt (parts per trillion, 10^?12, molar) 539.6 ppt and 76.8 ppt, respectively, for 2006–2009. The enhanced CFC mixing ratios compared to AGAGE sites such as Trinidad Head (THD), US and Mace Head (MHD), Ireland suggest regional influences even during background conditions at SDZ, which is much closer to highly-populated areas. Between 2006 and 2009 background CFCs exhibited downward trends at rates of ?2.0 ppt yr^?1 for CFC-11, ?2.5 ppt yr^?1 for CFC-12 and ?0.7 ppt yr^?1 for CFC-113. De-trended 3-year average background seasonal cycles displayed small fluctuations with peak-to-trough amplitudes of 1.0 ± 0.02 ppt (0.4%) for background CFC-11, 1.3 ± 2.1 ppt (0.3%) for CFC-12 and 0.2 ± 0.4 ppt (0.3%) for CFC-113. On the other hand, during pollution periods these CFCs showed much larger seasonal cycles of 11.2 ± 10.7 ppt (5%) for CFC-11, 7.5 ± 6.5 ppt (2%) for CFC-12 and 1.0 ± 1.2 ppt (1.2%) for CFC-113, with apparent winter minima and early summer maxima. This enhancement was attributed to prevailing wind directions from urban regions in summer and to enhanced anthropogenic sources during the warm season. In general, horizontal winds from northeast showed negative contribution to atmospheric CFCs loading, whereas South Western advection (urban sector: Beijing) had positive contributions.     

垃圾炉一次风量对炉床燃烧影响的仿真研究

针对垃圾焚烧炉床层内垃圾燃烧过程复杂性及影响垃圾燃烧效率因素多的问题,运用数值仿真方法对某垃圾焚烧炉床层垃圾燃烧进行了模拟,获得了垃圾质量流失速率、水分蒸发速率、挥发分释放速率、焦炭燃烧速率和烟气的温度;并在50~1 000 Nm3/min范围内改变一次风流量,获得了床层质量流失比值、过剩空气系数和烟气中各组分的质量百分比含量。仿真结果显示,一次风流量取值517.47~6`32.09 Nm3/min时燃烧效率较高;炉排两端区域的一次风流量在50~75 Nm3/min时,可以使垃圾床表面平均温度明显提高,而且还可以提高燃烧效率,同时减少供风总量,节约能源与动力资源。本研究对优化设计垃圾焚烧炉,提高床层内垃圾的燃烧效率有一定参考价值。