重大工业危险源(罐区)监控预警系统

系统建立了管理软件和硬件监控相结合的安全生产监控预警系统，在安全管理的基 础上，把罐区诸多的危险参数给予实时监测、报警和控制。本系统实现了生产过程控制与安全监控 相结合，安全监测报警与事故预案相结合，既满足了生产控制又实现了动态的安全管理，对安全生产 具有较大意义。     

The distribution and enrichment characteristics of copper in soil and <Emphasis Type="Italic">Phragmites australis</Emphasis> of Liao River estuary wetland

The aims of the present investigation were to reveal the distribution and enrichment characteristics of copper in soil and Phragmites australis of Liao River estuary wetland. The concentrations of copper in root, stem, leaf, and ear of Phragmites australis as well as in soil were determined to study the absorption capacity of copper by wild Phragmites australis of Liao River estuary wetland. The study was carried out at test pool of the Shenyang Agricultural University, and the experimental materials (soil, irrigating water and Phragmites australis) were derived from Liao River estuary wetland. The concentrations of copper in soil and Phragmites australis were 16.4441 to 49.0209 mg/kg and 0.8621 to 89.5524 mg/kg, respectively. The results indicated that the enrichment coefficients of copper in different tissues of Phragmites australis changed with the growth of Phragmites australis. The results revealed that the enrichment coefficients of copper in the whole Phragmites australis were greater than 1 at each growing stage of the Phragmites australis. The results also showed that the transfer coefficients of Phragmites australis to copper changed with the growth of Phragmites australis. The results revealed that the Phragmites australis had a good removal effect on copper from soil and had some characteristics of copper hyperaccumulator.     

分子筛孔结构对CO_2吸附性能的影响

采用巨正则蒙特卡罗方法模拟了CO_2在FAU分子筛上的吸附情况,比较了不同CO_2逸度下,CO_2在分子筛模型上的吸附位、吸附量的变化,拟合了其吸附等温线。结果表明:在吸附饱和状态下,分子筛的孔结构越大,对CO_2的吸附量越大,对于比CO_2分子更小的微孔结构,吸附几乎不发生;在低逸度下,CO_2的吸附主要发生在小孔内,随着逸度的提高,CO_2的吸附量迅速上升;在高逸度下,吸附量的提高主要发生在大孔内;FAU分子筛吸附CO_2的过程符合Ⅰ型Langmuir吸附等温线,在高压下对CO_2的吸附能力远大于低压下的吸附能力。     

Reduced-glutathione concentrations in Boleophthalmus pectinirostris tissues exposed to benzo(a)pyrene

ＩｎｔｒｏｄｕｃｔｉｏｎＢｅｉｎｇａｔｙｐｉｃａｌｐｏｌｙｃｙｃｌｉｃａｒｏｍａｔｉｃｈｙｄｒｏｃａｒｂｏｎｓ(ＰＡＨｓ) ,ｂｅｎｚｏ[ａ]ｐｙｒｅｎｅ(ＢａＰ)ｄｅｓｅｒｖｅｓｓｅｒｉｏｕｓｓｔｕｄｙｂｅｃａｕｓｅＰＡＨｓａｒｅｎｏｗｒｅｃｏｇｎｉｚｅｄａｓｍａｊｏｒｅｎｖｉｒｏｎｍｅｎｔａｌｐｏｌｌｕｔａｎｔｓ .ＥｘｐｏｓｕｒｅｔｏＰａＨｓｉｓｖｉｒｔｕａｌｌｙｕｎａｖｏｉｄａｂｌｅａｎｄｉｓｓｔｒｏｎｇｌｙｓｕｓｐｅｎｄｅｄｏｆｂｅｉｎｇａｃａｕｓａｔｉｖｅｆａｃｔｏｒｉｎｃｅｒｔａｉｎｔｕｍｏ…     

蒙德法在火电厂液氨储罐评价单元的应用

火电厂液氨储罐单元存在大量高纯度的液氨,一旦发生火灾、爆炸,后果极其严重。为了研究液氨储罐的火灾爆炸危险性及毒性,在对火电厂液氨储罐危险性辨识的基础上,依据液氨储罐单元的主要参数,运用蒙德法分别确定评价中需要的各种危险性系数,从而进行各项指标计算,查询危险性等级表,将各项指标进行等级划分,结论表明各项危险等级都很高。在得出结论基础上,进行安全措施补偿评价,补偿后的各种危险等级均降低,可见采取补偿措施后能够一定程度的降低火灾、爆炸、毒性的危险性,防止事故的发生。     

“8·29”充装台充装现场氧气瓶爆炸事故原因分析

介绍了较为少见的充装台充装过程中氧气瓶爆炸事故,描述了事故爆炸后的现场。对爆炸气瓶碎片进行化学成分分析、机械性能、金相试验、内壁附着物化学成分分析和能谱分析。通过分析认定,由于误操作油脂混进氧气瓶,高压氧气和油脂接触发生剧烈的自燃氧化放热,使瓶内的氧气迅速升温升压,超出气瓶承压极限导致气瓶爆炸。结合工作经验,提出要严格气瓶充装前的检验,加强气瓶使用和经销单位的安全监管等防范措施和建议,对氧气瓶的安全管理具有参考价值和实际意义。     

Experimental study on non-destructive testing of rock bolts based on pseudo-random signal

The quality of rock bolt anchoring is closely related to the stability and safety of underground engineering and slope protection. In this paper, non-destructive testing of rock bolts is proposed based on pseudo-random signal, owing to the deficiencies of the conventional detecting method of stress wave reflection. The characteristics of pseudo-random signal for non-destructive testing of rock bolts are introduced. And the rock bolts are tested in the experiment, the time of reflection wave is identified and the length of rock bolts is calculated through cross correlation analysis between the extracted wavelet signal and the test signal. It is proved that the testing results of non-destructive testing methods based on pseudo-random signal are of low deviation. The experiment has shown that non-destructive testing of rock bolts based on pseudo-random signal is feasible with high precision.     

Prediction of minimum ignition energy of aerosols using flame kernel modeling combined with flame front propagation theory

Flammable aerosols have created many fire and explosion hazards in the process industry, but the flammability of aerosols has not been fully understood. The minimum ignition energy has been widely used as an indicator for flammability of combustible mixtures, but the amount of experimental data on the minimum ignition energy of aerosols is very limited. In this work, the minimum ignition energy of tetralin aerosols is predicted using an integrated model. The model applies the flame front propagation theory in aerosol systems to the growth of the flame kernel, which was created during the spark discharge in the ignition process. The aerosol minimum ignition energy was defined as the minimum level of energy in the initial flame kernel to maintain the kernel temperature above the minimum ignition temperature of 1073 K specific for tetralin aerosols during the kernel growth. The minimum ignition energy obtained in the model is influenced by the fuel-air equivalence ratio and the size of the aerosol droplets. For tetralin aerosols of 40 μm diameter, E_min decreases significantly from 0.32 mJ to 4.3 × 10 e⁻³ mJ when the equivalence ratio rises from 0.57 to 1.0. For tetralin aerosols of 0.57 equivalence ratio, E_min increases from as 0.09 mJ to 0.32 mJ when the droplet diameter rises from 10 μm to 60 μm. The trends are in agreement with previous experimental observations. The method used in current work has the potential to prediction of the minimum ignition energy of aerosol.     

Parallel and serial methods of calculating thermal insulation in European manikin standards

Standard No. EN 15831:2004 provides 2 methods of calculating insulation: parallel and serial. The parallel method is similar to the global one defined in Standard No. ISO 9920:2007. Standards No. EN 342:2004, EN 14058:2004 and EN 13537:2002 refer to the methods defined in Standard No. EN ISO 15831:2004 for testing cold protective clothing or equipment. However, it is necessary to consider several issues, e.g., referring to measuring human subjects, when using the serial method. With one zone, there is no serial-parallel issue as the results are the same, while more zones increase the difference in insulation value between the methods. If insulation is evenly distributed, differences between the serial and parallel method are relatively small and proportional. However, with more insulation layers overlapping in heavy cold protective ensembles, the serial method produces higher insulation values than the parallel one and human studies. Therefore, the parallel method is recommended for standard testing.     

双氧水热失控时的泄放面积评估

为了保证50％双氧水热失控时在储罐中的安全泄放,利用VSP2(Vent Sizing Package 2)模拟了50％双氧水在带放空测试池中绝热条件下的热失控过程,得到了过程的温度、压力、温升速率变化情况,利用DIERS通用方法计算了50％双氧水安全泄放所需的放空口面积,得到了放空口面积的计算公式.结果表明,储罐设置足够的放空口面积可保证双氧水的安全泄放,在充装系数为0.8时所需的放空面积为0.005 2 V/m.