Physical and ecological thresholds for deposited sediments in streams in agricultural landscapes

Excessive sedimentation in streams and rivers remains a pervasive problem for the protection of aquatic habitat and the sustainability of aquatic communities. Whereas water quality criteria have been determined for suspended sediments in many jurisdictions across North America, comparably little has been done for deposited (also known as bedded) sediments. Through Canada's National Agri-Environmental Standards Initiative, assessment techniques and analytical tools were developed for estimating environmental thresholds for deposited sediments in agricultural watersheds in New Brunswick (NB) and Prince Edward Island (PEI) in the Atlantic Maritimes of Canada. Physical thresholds were developed through assessment of geomorphic metrics, which were then analyzed using y-intercept and 25th percentile approaches. For NB, there was strong agreement in physical thresholds for both analytical approaches (e.g., percent fines <2 mm were 7.5 for y-intercept and 6.9 for 25th percentile approaches). In contrast, physical thresholds for PEI differed considerably between approaches (e.g., percent fines <2 mm were 6.1 for y-intercept and 19.6 for 25th percentile approaches), likely due to a narrower range in agricultural land cover. Cross-calibration of our provisional physical thresholds for NB with ecological (i.e., benthic macroinvertebrate) assessments show that ecological thresholds, calculated as change-points in relationships between Ephemeroptera-Plecoptera-Trichoptera relative abundance or Modified Family Biotic Index and geomorphic criteria, were more liberal than physical thresholds. These results suggest that provisional thresholds developed using geomorphic criteria should demarcate change from the least disturbed condition and reduce the risk of sedimentation degrading benthic ecosystems.     

Using the soil and water assessment tool to estimate achievable water quality targets through implementation of beneficial management practices in an agricultural watershed

Runoff from crop production in agricultural watersheds can cause widespread soil loss and degradation of surface water quality. Beneficial management practices (BMPs) for soil conservation are often implemented as remedial measures because BMPs can reduce soil erosion and improve water quality. However, the efficacy of BMPs may be unknown because it can be affected by many factors, such as farming practices, land-use, soil type, topography, and climatic conditions. As such, it is difficult to estimate the impacts of BMPs on water quality through field experiments alone. In this research, the Soil and Water Assessment Tool was used to estimate achievable performance targets of water quality indicators (sediment and soluble P loadings) after implementation of combinations of selected BMPs in the Black Brook Watershed in northwestern New Brunswick, Canada. Four commonly used BMPs (flow diversion terraces [FDTs], fertilizer reductions, tillage methods, and crop rotations), were considered individually and in different combinations. At the watershed level, the best achievable sediment loading was 1.9 t ha(-1) yr(-1) (89% reduction compared with default scenario), with a BMP combination of crop rotation, FDT, and no-till. The best achievable soluble P loading was 0.5 kg ha(-1) yr(-1) (62% reduction), with a BMP combination of crop rotation and FDT and fertilizer reduction. Targets estimated through nonpoint source water quality modeling can be used to evaluate BMP implementation initiatives and provide milestones for the rehabilitation of streams and rivers in agricultural regions.     

Metal exposures in an inner-city neonatal population

ObjectivesWe measured concentrations of lead (Pb), manganese (Mn), chromium (Cr), and copper (Cu) in umbilical cord whole blood and examined sources of environmental Pb exposures in a predominantly African-American population.MethodsBetween April and July 2006, we collected reproductive histories, questionnaires, and blood samples from 102 women, aged 16–45 years, who delivered at a Memphis, TN hospital.ResultsThe prevalence of preeclampsia and low birth weight infancy in the study population was 11% and 10%, respectively. Twenty-eight percent of mothers reported living near a potential Pb-contaminated area, while 43% lived in a residence built before 1978. Geometric mean (GM) concentrations for umbilical cord blood in the study population were 1.3, 3.5, 9.0, and 52.0 µg/dL for Pb, Mn, Cr, and Cu, respectively. Six neonates had cord blood Pb (CBL) concentrations above 10 µg/dL, while 20 had CBL concentrations ≥ 2 µg/dL. GM umbilical CBL levels were higher in neonates born to women living near a potential Pb-contaminated area (2.2 vs. 1.1 µg/dL) and those with friends, family or household members exposed to lead products (1.6 vs. 1.1 μg/dL). Some evidence of an exposure–response relationship was also detected between all four metal concentrations and an increasing number of maternal lead exposures. After adjustment for confounding, proximity to a Pb-contaminated area was the strongest environmental determinant of CBL levels among neonates with CBL concentrations of ≥ 2 µg/dL (odds ratio = 5.1; 95% CI = 1.6, 16.7).ConclusionsMetal concentrations were elevated in this population, and CBL levels were associated with proximity to Pb-contaminated areas.     

Metrics for integrating sustainability evaluations into remediation projects

The US Sustainable Remediation Forum (SURF) created a compilation of metrics (Metrics Toolbox) in response to a need for a broad set of metrics that could be used to assess and monitor the effectiveness of remedies in achieving sustainability goals. Metrics are the key impacts, outcomes, or burdens that are to be assessed or balanced to determine the influences and impacts of a remedial action. Metrics can reflect any of the three aspects of sustainability (i.e., environmental, social, or economic) or a combination of these aspects. Regardless, metrics represent the most critical sustainable outcomes from the perspective of the key stakeholders. The Metrics Toolbox is hosted online at www.sustainableremediation.org/library/guidance‐tools‐and‐other‐resources . By selecting metrics from the Metrics Toolbox as a starting point and considering a potentially wider suite of metrics in remedial program decisions, appropriate assessments can be made. Qualitative and quantitative metrics are tabulated for each remedial phase: remedial investigation, remedy selection, remedial design, remedial construction, operation and maintenance, and closure. Attributes for each metric are described so that remediation practitioners and key stakeholders can view the universe of metrics available and select the most relevant, site‐specific metrics for a particular site. For this reason, SURF recommends that remediation practitioners consider the metrics compiled in the Metrics Toolbox as a companion to the sustainable remediation framework published elsewhere in this journal and other sustainability evaluations. © 2011 Wiley Periodicals, Inc.     

Dilution-based emissions sampling from stationary sources: Part 2--Gas-fired combustors compared with other fuel-fired systems

With the recent focus on fine particle matter (PM2.5), new, self-consistent data are needed to characterize emissions from combustion sources. Such data are necessary for health assessment and air quality modeling. To address this need, emissions data for gas-fired combustors are presented here, using dilution sampling as the reference. The dilution method allows for collection of emitted particles under conditions simulating cooling and dilution during entry from the stack into the air. The sampling and analysis of the collected particles in the presence of precursor gases, SO2 nitrogen oxide, volatile organic compound, and NH3 is discussed; the results include data from eight gas fired units, including a dual-fuel institutional boiler and a diesel engine powered electricity generator. These data are compared with results in the literature for heavy-duty diesel vehicles and stationary sources using coal or wood as fuels. The results show that the gas-fired combustors have very low PM2.5 mass emission rates in the range of approximately 10(-4) lb/million Btu (MMBTU) compared with the diesel backup generator with particle filter, with approximately 5 x 10(-3) lb/MMBTU. Even higher mass emission rates are found in coal-fired systems, with rates of approximately 0.07 lb/MMBTU for a bag-filter-controlled pilot unit burning eastern bituminous coal. The characterization of PM2.5 chemical composition from the gas-fired units indicates that much of the measured primary particle mass in PM2.5 samples is organic or elemental carbon and, to a much less extent, sulfate. Metal emissions are quite low compared with the diesel engines and the coal- or wood-fueled combustors. The metals found in the gas-fired combustor particles are low in concentration, similar in concentration to ambient particles. The interpretation of the particulate carbon emissions is complicated by the fact that an approximately equal amount of particulate carbon (mainly organic carbon) is found on the particle collector and a backup filter. It is likely that measurement artifacts, mostly adsorption of volatile organic compounds on quartz filters, are positively biasing "true" particulate carbon emission results.     

Multimodal signals increase active space of communication by wolf spiders in a complex litter environment

Multimodal signals may compensate for environmental constraints on communication, as signals in different modalities vary in efficacy. We examined the influence of complex microhabitats on transmission of vibratory and visual signals of courting male Schizocosa ocreata wolf spiders (Araneae: Lycosidae) with laser Doppler vibrometry (LDV) and behavioral observations in lab and field. We measured maximum potential detection distance of visual and vibratory signals by females in laboratory mesocosms, recorded vibration signal attenuation on different substrates, and estimated transmission distances for male vibration signals in the field. We also determined effective line-of-sight visual detection distances in the field with laser distance measures. Together, these data were used to estimate the potential and effective active space of multimodal signals. LDV measures show leaves are highly conductive substrates for wolf spider vibratory signals compared to others (soil, wood, rock). For both visual and vibratory modes, lab estimates of maximum potential distance for signal transmission and detection (behavior studies) exceeded estimates of effective active space (signal attenuation, “vanishing point,” and “line-of-sight” measures). Field estimates of transmission distance for signal modes overlap, such that in close range (<20 cm), vibratory signals are more likely to be detected, while farther away, visual signals are more likely to be seen. These findings thus support current hypotheses regarding how multimodal communication might extend the range of overall signal active space or compensate for environmental constraints.     

Treatment of swine wastewater in aerobic granular reactors: comparison of different seed granules as factors

The granulation process, physic-chemical properties, pollution removal ability and bacterial communities of aerobic granules with different feed-wastewater (synthetic wastewater, R1; swine wastewater, R2), and the change trend of some parameters of two types of granules in long-term operated reactors treating swine wastewater were investigated in this experiment. The result indicated that aerobic granulation with the synthetic wastewater had a faster rate compared with swine wastewater and that full granulation in R1 and R2 was reached on the 30th day and 39th day, respectively. However, although the feed wastewater also had an obvious effect on the biomass fraction and extracellular polymeric substances of the aerobic granules during the granulation process, these properties remained at a similar level after long-term operation. Moreover, a similar increasing trend could also be observed in terms of the nitrogen removal efficiencies of the aerobic granules in both reactors, and the average specific removal rates of the organics and ammonia nitrogen at the steady-state stage were 35.33 mg·g⁻¹ VSS and 51.46 mg·g⁻¹ VSS for R1, and 35.47 mg·g⁻¹ VSS and 51.72 mg·g⁻¹ VSS for R2, respectively. In addition, a shift in the bacterial diversity occurred in the granulation process, whereas bacterial communities in the aerobic granular reactor were not affected by the seed granules after long-term operation.     

A Missed Opportunity?: NOAA’s Use of Social Media to Communicate Climate Science

In the current media landscape, organizations often communicate about science directly with publics through online channels rather than relying on journalist gatekeepers. Online platforms present organizations with the opportunity to participate in two-way communication in order to increase engagement with science. The present study examined how the National Oceanic and Atmospheric Administration (NOAA) utilizes social media to interact with publics. Results suggest that NOAA does not fully utilize the dialogic potential of social media, which could enhance both the public’s science literacy and trust in science regarding climate change specifically. This study informs how public relations theory may complement science communication theory and practice as deficit model-thinking transitions to contemporary approaches for public engagement with science.