化学辅助方法用于剩余污泥减量的研究

最近,基于化学氧化和解偶联的污泥减量新方法得到更深人研究。回顾了化学辅助方式减少剩余污泥产生的方法,包括碱（酸）-加热处理,活性污泥-自氧工艺,氯-活性污泥工艺,新陈代谢解偶联和高浓度溶解氧方法。     

深埋隧道圆形基坑围护结构变形特性及控制指标探讨

基于深埋隧道超深竖井工程,对比分析了圆形与矩形基坑受力变形特征,在对国内外圆形竖井基坑典型案例统计分析的基础上,探讨圆形竖井基坑的变形抑制机理,以现有规范、工程实例为基础确定圆形竖井基坑的变形控制指标。研究结果表明:①考虑空间结构体系的圆形竖井计算的地墙内力及变形比弹性地基梁的计算结果小20%以上,而矩形基坑的计算结果仅比弹性地基梁的计算结果小0～15%;②支护结构承受轴力为主的"圆筒"效应、轴力对薄弱处的加强以及土体的"挤压"效应三者的综合作用是圆形基坑受力变形抑制的原因;③随着基坑深度增大,基坑侧墙水平位移与深度的比值显著减小;随着基坑直径增大,基坑侧墙水平位移与深度的比值变大;④建议以基坑深度35m、基坑直径40m为分界点,根据情况分别选取0.5‰、1‰、1.8‰作为对于圆形深基坑支护结构水平位移控制指标。     

Characteristics of two transferable aminoglycoside resistance plasmids in Escherichia coli isolated from pig and chicken manure

pRKZ3 is a non-conjugative IncQ plasmid, while pKANJ7 is a conjugative IncX plasmid. The optimal mating time of pKANJ7 varied under different conditions. Both of the two transferable ARPs had little impact on the growth of their hosts. A relatively high level of fitness cost was observed for pKANJ7. The fitness cost of ARPs depended on their hosts. Plasmid-mediated antibiotic resistance genes (ARGs) have recently become a more prominent concern in the global environment. However, the prevalence of aminoglycoside resistance plasmids in the livestock industry is under reported. In this study, two transferable aminoglycoside resistance plasmids, pRKZ3 and pKANJ7, isolated from pig and chicken manure, were characterized. Results showed that pRKZ3 (8236 bp) is a non-conjugative IncQ plasmid and contains genes encoding for plasmid replication and stabilization (repA, repB and repC), mobilization (mob), and antibiotic resistance (arr-3 and aacA). pKANJ7 (30142 bp) is a conjugative IncX plasmid which codes for a type IV secretion system (T4SS). Conjugative transfer experiments showed that the optimal mating time of pKANJ7 was 8 h under the starvation condition, but the number of tranconjugants increased with time under the nutrient condition. Statistical analysis indicated that the two plasmids had little impact on the growth of their hosts, but a relatively high level of fitness cost due to pKANJ7 was observed. We also found that the fitness cost of plasmids depended on their hosts. Compared with pKANJ7, the relative fitness cost index of pRKZ3 varied within a narrow range during the 10 days of competition. The low level of fitness cost of pRKZ3 might contribute to the persistence of the plasmid in the environment. Our study provides new information for understanding the characterizations of antibiotic resistance plasmids (ARPs) in manure sources and helps to clarify the transfer and persistence of ARPs in the environment following the application of manure.     

High-solid anaerobic digestion of sewage sludge: achievements and perspectives

• High-solid anaerobic digestion (HS-AD) of sewage sludge (SS) is overviewed. • Factors affecting process stability and performance in HS-AD of SS are revealed. • HS effect and knowledge gaps of current research on the HS-AD of SS are identified. • Future efforts on addressing knowledge gaps and improving HS-AD of SS are proposed. High-solid anaerobic digestion (HS-AD) has been applied extensively during the last few decades for treating various organic wastes, such as agricultural wastes, organic fractions of municipal solid wastes, and kitchen wastes. However, the application of HS-AD to the processing of sewage sludge (SS) remains limited, which is largely attributable to its poor process stability and performance. Extensive research has been conducted to attempt to surmount these limitations. In this review, the main factors affecting process stability and performance in the HS-AD of SS are comprehensively reviewed, and the improved methods in current use, such as HS sludge pre-treatment and anaerobic co-digestion with other organic wastes, are summarised. Besides, this paper also discusses the characteristics of substance transformation in the HS-AD of SS with and without thermal pre-treatment. Research has shown that the HS effect is due to the presence of high concentrations of substances that may inhibit the function of anaerobic microorganisms, and that it also results in poor mass transfer, a low diffusion coefficient, and high viscosity. Finally, knowledge gaps in the current research on HS-AD of SS are identified. Based on these, it proposes that future efforts should be devoted to standardising the definition of HS sludge, revealing the law of migration and transformation of pollutants, describing the metabolic pathways by which specific substances are degraded, and establishing accurate mathematical models. Moreover, developing green sludge dewatering agents, obtaining high value-added products, and revealing effects of the above two on HS-AD of SS can also be considered in future.     

Potential sources of unintentionally produced PCB,HCB, and PeCBz in China: A preliminary overview

Under the Stockholm Convention on Persistent Organic Pollutants (POPs), China is required not only to reduce polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/PCDF) but also unintentionally produced polychlorinated biphenyls (PCB), hexachlorobenzene (HCB) and pentachlorobenzene (PeCBz). A baseline of the sources in China that generate these unintentional POPs is needed for both research and regulation purposes. In this paper, we have compiled production data of potential sources in China and assessed them in five-year intervals from 2000 to 2015. Most of these activities experienced changes from rapid growth to slow growth. Measured data for PCB, HCB and PeCBz in samples collected from potential sources in China were reviewed. Most information was associated to thermal processes with high potential of emission, including waste incineration and ferrous and non-ferrous metal production. In addition, high levels of PCB, HCB and PeCBz were found as impurities in a few chlorinated products or as by-products in solvent production, which suggested organochlorine industry might be important sources. Finally, based on the studies reviewed, recommendations for future actions in research and policy as well as a few regulatory issues in China are discussed.

Open image in new window

     

石化厂污水反渗透浓水的催化臭氧氧化处理

针对某炼油厂二沉池出水回用过程中产生的反渗透浓水高盐、高硬、低COD和可生化性差的特点,采用催化臭氧氧化工艺处理,出水达标排放.实验确定了对臭氧氧化催化效果最好的催化剂,合适的反应条件为:反应时间大于30 min,臭氧质量浓度15-30 mg/L.经催化臭氧氧化处理后,反渗透浓水的COD降低至60 mg/L以下,满足排放要求,同时反渗透浓水可生化性提高.     

阿特拉津生产废水排放对水稻危害的风险分析

阿特拉津是目前世界上广泛使用的除草剂之一,在我国主要使用于东北和华北地区。近年来我国一些地区接连发现了灌溉含有阿特拉津河水的水稻疫苗受害事件。以河北省宣化农药厂的生产工艺为例,通过使用概率评价的方法,进行了阿特拉津对水稻危害的风险分析研究结果表明,这种风险不仅与工厂废水中阿特拉津的排放有关,而且还取决于河水的流量及其风险率所得结果与该厂历史上的实际情况相吻合。     

室内空气净化技术

概述了室内空气污染的类型 ,全面介绍了目前各种室内空气净化技术及其进展 ,并且分析了各技术的优缺点。此外 ,提出将膜分离与光催化技术相结合 ,能克服当前各种技术的局限性的构想。这一组合技术可能成为今后该领域研究的一个重要方向     

NaOH预处理对杂交狼尾草厌氧发酵产沼气的影响

研究了Na OH预处理对杂交狼尾草厌氧消化制沼气的影响。采用质量分数分别为0%、2%、4%、6%和8%的Na OH溶液对杂交狼尾草进行碱预处理,在中温(35℃)、TS质量分数6%、接种率20%及初始p H为7.0条件下,进行厌氧发酵实验。对比了处理前后原料木质纤维素含量,探讨了不同浓度预处理对发酵过程沼气产量、甲烷浓度、p H以及产气速率的影响。结果表明,Na OH预处理有助于提高杂交狼尾草厌氧发酵的产气量和产气速率,其中4%Na OH预处理为较优条件。经4%Na OH溶液常温浸润24 h后,杂交狼尾草木质素降解率最大,比未处理实验组提高了31.2%;厌氧发酵总产气量比未处理实验组提高了31.6%。