Enhanced solubilization of arsenic and 2,3,4,6 tetrachlorophenol from soils by a cyclodextrin derivative

The application of extracting aqueous solutions with cyclodextrins in several soil remediation technologies has been increasingly studied but little is known about their removal capacities toward the inorganic species. Herein, the effectiveness of cyclodextrins (CDs) in extracting arsenic, copper, and iron from a mining soil is presented. In a preliminary test of four types of CD aqueous solutions, only the addition of carboxylmethyl-beta-cyclodextrin CMCD (a cyclodextrin derivative) led to a significant enhancement in arsenic removal. An increase in the concentration of copper and iron in the leachates was also observed with CMCD. Kinetic study of arsenic release was carried out at two temperatures (20 and 35 degrees C). The arsenic concentration in the leachates increases with increasing cyclodextrin concentration. At an 80 mM CMCD concentration, arsenic, copper, and iron released in filtrates were about 20-, 1,000-, and 4,000-fold greater, respectively, than that obtained using deionized water. In the soil system, the CMCD capacity removal was found to be higher for cations than for arsenic. Because the tetrachlorophenol can co-occur with arsenic and copper in several contaminated sites, its solubilization by CMCD was also investigated. Extraction experiments were performed to extract 2,3,4,6 tetrachlorophenol (TeCP) in spiked soil with CMCD. The results of batch experiments have shown that CMCD could significantly increase the TeCP extraction from soil. CD sorption on soils as quantified by a fluorescence technique was low, indicating no significant loss of CD during the leaching experiments. The use of CMCD as a flushing agent to enhance the removal of both inorganic and organic pollutants from mixed-contaminated soils appears as a promising remediation method.     

Distribution of pesticides and heavy metals in trophic chain

Determination of triazines herbicides (atrazine and simazine) by high performance liquid chromatography (HPLC) in samples of trophic chain were worked out. Determination limits of 0.5 μg g⁻¹ for atrazine, 0.8 μg g⁻¹ for simazine with pesticides recovery of 70–77% in trophic chain samples were obtained. The content of simazine in soils was in range 1.72–57.89 μg g⁻¹, in grass 5–88 μg g⁻¹, in milk 2.32–15.29 μg g⁻¹, in cereals 10.98–387 μg g⁻¹, in eggs 30.14–59.48 μg g⁻¹, for fruits: 2.45–6.19 μg g⁻¹. The content of atrazine in soils was in range 0.69–19.59 μg g⁻¹, in grass 7.85–23.85 μg g⁻¹, in cereals 1.88–43.08 μg g⁻¹. Cadmium, lead and zinc were determined by inductively coupled plasma atomic emission spectrometry (ICP-AES) in the same samples as atrazine and simazine. Determination limits for cadmium 5 × 10⁻³ μg g⁻¹, for lead 1 × 10⁻² μg g⁻¹, and for zinc 0.2 × 10⁻³ μg g⁻¹, were obtained. The content of cadmium in soil was in range 0.13–5.89 μg g⁻¹, in grass 114–627.72 × 10⁻³ μg g⁻¹, in milk 8.88–61.88 × 10⁻³ μg g⁻¹, in cereals 0.20–0.31 μg g⁻¹, in eggs 0.11–0.15 μg g⁻¹, in fruits 0.23–0.59 μg g⁻¹. The content of lead in soils was in range 0.57–151.50 μg g⁻¹, in grass 0.16–136.57 μg g⁻¹, in milk 1.16–3.74 μg g⁻¹, in cereals 1.05–5.47 μg g⁻¹, in eggs 5.79–55.87 μg g⁻¹, in fruits 21.00–87.36 μg g⁻¹. Zinc content in soil was in range 9.15–424.5 μg g⁻¹, in grass 35.20–55.87 μg g⁻¹, in milk 20.00–34.38 μg g⁻¹, in cereals 14.94–28.78 μg g⁻¹, in eggs 15.67–32.01 μg g⁻¹, in fruits 14.94–18.88 μg g⁻¹.

Described below extraction and mineralization methods for particular trophic chains allowed to determine of atrazine, simazine, cadmium, lead and zinc with good repeatability and precision. Emphasis was focused on liquid–liquid extraction and solid-phase extraction of atrazine and simazine from analysed materials, as well as, on monitoring the content of herbicides and metals in soil and along trophic chain. Higher concentration of pesticides in samples from west region of Poland in comparison to that of east region is likely related to common applying them in Western Europe in relation to East Europe. The content of metals strongly depends on samples origin (industry area, vicinity of motorways).     

东寨港流域地表水水化学组成特征及其成因

为研究滨海地区地表水资源和红树林生态系统的水环境,利用水化学分析、数理统计和Gibbs水-岩分析模型等方法对东寨港流域内演丰西河和三江河两条河流水体的水化学组成和氢氧稳定同位素特征进行分析,揭示了演丰西河和三江河河流地表水的水化学组成特征,讨论了该区域地表水的水化学组分变化及其控制因素.结果 表明:演丰西河地表水的水化...     

Two roads to two sexes: unifying gamete competition and gamete limitation in a single model of anisogamy evolution

Recent studies have revealed the importance of self-consistency in evolutionary models, particularly in the context of male–female interactions. This has been largely ignored in models of the ancestral divergence of the sexes, i.e., the evolution of anisogamy. Here, we model the evolution of anisogamy in a Fisher-consistent context, explicitly taking into account the number of interacting individuals in a typical reproductive group. We reveal an interaction between the number of adult individuals in the local mating group and the selection pressures responsible for the divergence of the sexes. The same underlying model can produce anisogamy in two different ways. Gamete competition can lead to anisogamy when it is relatively easy for gametes to find each other, but when this is more difficult and gamete competition is absent, gamete limitation can provide another route for anisogamy to evolve. In line with earlier models, organismal complexity favors anisogamy. We argue that the early contributions of Kalmus and Scudo, largely dismissed as group selectionist, are valid under certain conditions. Linking their work with the contributions of Parker helps to explain why precisely males keep producing more sperm than can ever lead to offspring: sperm could evolve to provision zygotes but this brings little profit for the effort required, because sperm would have to be equipped with provisioning ability before it is known which sperm will make it to the fertilization stage. This insight creates a logical link between paternal care under uncertain paternity (where again investment is selected against when some investment never brings about genetic benefits) and gamete size evolution.     

Spatial–temporal pattern of bluefin tuna (Thunnus thynnus L. 1758) gonad maturation across the Mediterranean Sea

Atlantic bluefin tuna (BFT; Thunnus thynnus) is a migrating species straddling the North Atlantic Ocean and Mediterranean Sea. It is assumed that this species is divided into a western and an eastern stock, which spawn in the Gulf of Mexico and the Mediterranean Sea, respectively. To learn more about the reproductive behavior of the eastern BFT stock, we tracked gonadal development in adult fish that were sampled between April and July during three consecutive years (2003–2005). Sampling campaigns were carried out using common fishing methods at selected locations within the Mediterranean Sea, namely Levantine Sea, Malta, and Balearic Islands. An additional sampling point, Barbate, was situated northwest of the Straits of Gibraltar along the Atlantic coast. Morphometric parameters such as the total body mass (M _B) and the weights of the gonads (M _G) were recorded, and the respective gonadosomatic index (GSI) values were calculated. The data collected revealed two important trends: (1) GSI values are higher in fish caught in the eastern rather than the western locations across the Mediterranean Sea, and (2) the GSI reaches maximum values between late May and early June in Levantine Sea (eastern Mediterranean Sea), and only 2 and 4 weeks later in the central (Malta) and western (Balearic Islands) locations, respectively. The advanced gonadal development in BFT correlates well with higher sea surface temperatures. Our findings also distinguish the northern Levantine Sea BFT population (mean M _B 78.41 ± 4.13 kg), and the Barbate BFT population with the greatest M _B (all fish sampled > 100 kg). These data reflect a situation in which the eastern Mediterranean basin may function as a habitat for young BFT, until they gain a larger M _B and are able to move to the Atlantic Ocean. However, the existence of genetically discrete BFT populations in the Mediterranean Sea cannot be ruled out.     

Life cycle assessment of waste paper management: The importance of technology data and system boundaries in assessing recycling and incineration

The significance of technical data, as well as the significance of system boundary choices, when modelling the environmental impact from recycling and incineration of waste paper has been studied by a life cycle assessment focusing on global warming potentials. The consequence of choosing a specific set of data for the reprocessing technology, the virgin paper manufacturing technology and the incineration technology, as well as the importance of the recycling rate was studied. Furthermore, the system was expanded to include forestry and to include fossil fuel energy substitution from saved biomass, in order to study the importance of the system boundary choices. For recycling, the choice of virgin paper manufacturing data is most important, but the results show that also the impacts from the reprocessing technologies fluctuate greatly. For the overall results the choice of the technology data is of importance when comparing recycling including virgin paper substitution with incineration including energy substitution. Combining an environmentally high or low performing recycling technology with an environmentally high or low performing incineration technology can give quite different results. The modelling showed that recycling of paper, from a life cycle point of view, is environmentally equal or better than incineration with energy recovery only when the recycling technology is at a high environmental performance level. However, the modelling also showed that expanding the system to include substitution of fossil fuel energy by production of energy from the saved biomass associated with recycling will give a completely different result. In this case recycling is always more beneficial than incineration, thus increased recycling is desirable. Expanding the system to include forestry was shown to have a minor effect on the results. As assessments are often performed with a set choice of data and a set recycling rate, it is questionable how useful the results from this kind of LCA are for a policy maker. The high significance of the system boundary choices stresses the importance of scientific discussion on how to best address system analysis of recycling, for paper and other recyclable materials.     

Management of packaging waste in Poland--development agenda and accession to the EU.

In recent years the issue of the municipal waste in Poland has become increasingly topical, with a considerable rise in the waste generation, much of which can be attributed to a boom in product packaging (mainly plastic). The annual production of plastics packaging has been constantly increasing over the last 20 to 30 years, and now exceeds 3.7 million tons. Due to a lack of processing technologies and poorly developed selective segregation system, packaging waste is still treated as a part of the municipal solid waste (MSW) stream, most of which is landfilled. As a result of Poland's access to the European Union, previous legal regulations governing municipal waste management have been harmonized with those binding on the member countries. One of the main changes, the most revolutionary one, is to make entrepreneurs liable for environmental risks resulting from the introduction of packaging to the market, and for its recycling. In practice, all entrepreneurs are to ensure recovery, and recycling, of used packaging from products introduced to the market at the required level. In recent year, the required recycling levels were fulfilled for all types of materials but mainly by large institutions using grouped and transport packaging waste for that matter. Household packaging gathered in the selective segregation system at the municipalities was practically left alone. This paper is an attempt to describe the system and assess the first year of functioning of the new, revamped system of packaging waste management in Poland. Recommendations are made relating to those features that need to be included in packaging waste management systems in order to maximize their sustainability and harmonization with the EU legal system.     

Bridging the gap between mechanistic and adaptive explanations of territory formation

How animals divide space can have fundamental implications for the population dynamics of territorial species. It has recently been proposed that space can be divided if animals tend to avoid fight locations, rather than the winner of fights gaining access to exclusive resources, behaviour that generates exclusive territories in two-dimensional space. A game-theory model has shown that this avoidance behaviour can be adaptive, but the adaptiveness has not been investigated in a spatially realistic context. We present a model that investigates potential strategies for the acquisition of territories when two-dimensional space must be divided between individuals. We examine whether exclusive territories form when animals avoid all encounters with others, or only those encounters that have led to losing fights, under different fighting costs and population densities. Our model suggests that when fighting costs are high, and the population density is low, the most adaptive behaviour is to avoid fight locations, which generates well-defined, exclusive territories in a population that is able to resist invasion by more aggressive strategies. Low fighting costs and high population densities lead to the break-down of territoriality and the formation of large, overlapping home ranges. We also provide a novel reason as to why so-called paradoxical strategies do not exist in nature: if we define a paradoxical strategy as an exact mirror-image of a common-sense one, it must respond in the opposite way to a draw as well as to wins and losses. When this is the case, and draws are common (fight outcomes are often not clear-cut in nature), the common-sense strategy is more often adaptive than a paradoxical alternative.Communicated by P. Bednekoff     

碲化镉量子点暴露对小鼠凝血相关因子的影响

研究碲化镉量子点(cadmium telluride quantum dots, Cd Te QDs)对小鼠凝血相关因子的影响,进一步探讨QDs的心血管毒性机制。将48只雄性ICR小鼠随机分成6组,每组8只。分别使用不同剂量(0.15μmol·kg~(-1)、1.5μmol·kg~(-1)和15μmol·kg~(-1))的Cd Te QDs和生理盐水一次性经尾静脉注射染毒小鼠1 d,15μmol·kg~(-1)剂量的Cd Te QDs染毒3 d和7 d,检测小鼠血浆中凝血相关因子的含量变化。结果显示,与对照组相比,随着染毒剂量增加小鼠组织型纤溶酶原激活剂(t-PA)和纤维蛋白原(FIB)含量逐渐增高,组织因子途径抑制物(TFPI)含量逐渐降低,具有明显的剂量-效应关系。除15μmol·kg~(-1)剂量组外,组织因子(TF)、凝血因子XII(FXII)和纤溶酶原(Plg)含量具有升高的趋势,抗凝血酶Ⅲ(AT-Ⅲ)含量则无明显变化;随着染毒时间增加,TF、FXII、FIB、Plg和t-PA含量有明显的先升高后降低的变化趋势,TFPI含量在1 d达到最低,之后逐渐升高,AT-Ⅲ含量则在7 d达到最低。Cd Te QDs急性染毒可引起小鼠血浆中TF、FXII、FIB、TFPI、Plg和t-PA的含量明显改变,并且具有不同的变化趋势。提示Cd Te QDs可能会激活凝血系统和纤溶系统,抑制抗凝系统,从而引起凝血功能紊乱。