An optimal level of dust explosion risk management: Framework and application

The current research provides guidance on the prevention and mitigation of dust explosion using a Quantitative Risk Management Framework (QRMF). Using concepts drawn from previous studies, the framework consists of three main steps: (i) a new combined safety management protocol, (ii) the use of DESC (Dust Explosion Simulation Code) and FTA (Fault Tree Analysis) to assess explosion consequences and likelihood, respectively, and (iii) application of the hierarchy of controls (inherent, engineered and procedural safety). QRMF assessment of an industrial case study showed that the original process was at high risk. DESC simulations and Probit equations determined the destructive percentages. FTAs revealed high probabilities of explosion occurrence; in addition, detailed individual and societal risks calculations were made, before and after the framework was applied. Based on the hierarchy of controls technique, the framework showed significant risk reduction to the point where the residual risk was acceptable for the process.     

Analyzing system safety and risks under uncertainty using a bow-tie diagram: An innovative approach

A bow-tie diagram combines a fault tree and an event tree to represent the risk control parameters on a common platform for mitigating an accident. Quantitative analysis of a bow-tie is still a major challenge since it follows the traditional assumptions of fault and event tree analyses. The assumptions consider the crisp probabilities and “independent” relationships for the input events. The crisp probabilities for the input events are often missing or hard to come by, which introduces data uncertainty. The assumption of “independence” introduces model uncertainty. Elicitation of expert's knowledge for the missing data may provide an alternative; however, such knowledge incorporates uncertainties and may undermine the credibility of risk analysis.This paper attempts to accommodate the expert's knowledge to overcome missing data and incorporate fuzzy set and evidence theory to assess the uncertainties. Further, dependency coefficient-based fuzzy and evidence theory approaches have been developed to address the model uncertainty for bow-tie analysis. In addition, a method of sensitivity analysis is proposed to predict the most contributing input events in the bow-tie analysis. To demonstrate the utility of the approaches in industrial application, a bow-tie diagram of the BP Texas City accident is developed and analyzed.     

Assessment of the environmental profile of PLA,PET and PS clamshell containers using LCA methodology

Life cycle assessments of bio-based polymer resin and products historically have shown favorable results in terms of environmental impacts and energy use compared to petroleum-based products. However, calculation of these impacts always depends on the system and boundary conditions considered during the study. This paper reports a cradle-to-cradle Life Cycle Assessment (LCA) of poly(lactic acid) (PLA) in comparison with poly(ethylene terephthalate) (PET) and poly(styrene) (PS) thermoformed clamshell containers, used for packaging of strawberries with emphasis on different end-of-life scenarios. It considers all the inputs such as fertilizers, pesticides, herbicides and seed corn required for the growing and harvesting of corn used for manufacturing PLA. For PET and PS, the extraction of crude oil and the entire cracking processes from crude oil through styrene and ethylene glycol and terephathalic acid are considered. Global warming, aquatic acidification, aquatic eutrophication, aquatic ecotoxicity, ozone depletion, non-renewable energy and respiratory organics, land occupation and respiratory inorganics were the selected midpoint impact categories. The geographical scope of the study reflects data from Europe, North America and the Middle East. PET showed the highest overall values for all the impact categories, mainly due to the higher weight of the containers. The main impacts to the environment were the resin production and the transportation stage of the resins and containers. This implies that the transportation stage of the package is an important contributor to the environmental impact of the packaging systems, and that it cannot be diminished.     

Adopting and applying eco-design techniques: a practitioners perspective

This paper discusses the findings of a small scale research project which explored the possibility of adopting eco-design techniques. The paper focuses on identifying how eco-design techniques can be determined as being compatible with new product development processes. Via the development of a five stage ‘applicability framework’, this study demonstrates how a compatible suite of tools can be identified for application to product development processes. Testing and validation of this ‘applicability framework’, which was used to identify three key eco-design techniques; namely checklists, guidelines, and a material, energy and toxicity (MET) matrix, is shown to have taken place in relation to the development of a lightweight chemical detector product. It is established that checklists, guidelines and the MET matrix can be used both on a specific product, and also more generally in the design process. In particular, the MET matrix is shown as being used to successfully identify key environmental aspects of the product during its lifetime. The paper concludes by arguing that eco-design techniques may not have been more widely adopted by businesses because such methods are not necessarily generic and immediately applicable, but instead require some form of process-specific customisation prior to use, which can in turn act as a barrier to adoption. It is also highlighted that the shear diversity of pressures that come to bear during the product development process can also act as a barrier to adoption, and that the full integration of eco-design techniques will have to encompass approaches which overcome such pressures.     

Inception of formation and early morphogenesis of the bacterial light organ of the sea urchin cardinalfish, <Emphasis Type="Italic">Siphamia versicolor</Emphasis>

The cardinalfish Siphamia versicolor (Perciformes: Apogonidae) forms a bioluminescent symbiosis with the marine luminous bacterium Photobacterium mandapamensis, harboring the bacteria in a ventral, disc-shaped light organ and using the bacterial light apparently for counterillumination and attracting prey. Little definitive information has been available on the developmental and microbiological events surrounding the initiation of symbiosis, a critical stage in the life history of the fish, in S. versicolor or any of the many other species of bacterially luminous fish. To identify the stage at which light organ formation begins, to determine the origin of cells forming the light organ, and to characterize its bacterial colonization status during development, early developmental stages of S. versicolor obtained and reared from wild-caught mouth-brooding males were examined with histological and microbiological methods. A light organ primordium was not evident in embryos, post-embryos, or pre-release larvae, whereas the light organ began to form within 1 day of release of full-term pre-flexion larvae from the mouths of male fish. Analysis of post-release larvae revealed that the light organ arises from a proliferation and differentiation of intestinal epithelial cells, and that it quickly develops structural complexity, including the formation of chambers and gaps contiguous with the intestinal epithelium. However, the nascent light organ remained uncolonized by the symbiotic bacteria through several days of post-release development, even in the presence of high numbers of the symbiotic bacteria. These results demonstrate that the inception of light organ formation in S. versicolor occurs independently of its symbiotic bacteria and that receptivity to bacterial colonization apparently requires substantial post-release development of the light organ. Larvae therefore most likely acquire their symbiotic bacteria from seawater, during or shortly after the transition from the pre-flexion to the flexion developmental stage.     

De-novo formation of dioxins and furans and the memory effect in waste incineration flue gases

The formation of dioxin (polychlorinated-rho-dibenzodioxins - PCDD) and furan (polychlorinated dibenzofurans - PCDF) in waste incineration flyash in relation to temperature has been investigated in a bench scale reactor. The PCDD/PCDF released into the exhaust gases of the reactor and trapped in a condensation and vapour phase adsorption system were also determined. The concentrations of PCDD/PCDF in the flyash were analysed in detail for all congeners and isomers including the mono-, di- and tri-PCDD/PCDF. De-novo synthesis of PCDD/PCDF was clearly seen in the flyash with large changes in concentrations of PCDD/PCDF with only small changes in temperature. Exhaust gas PCDD/PCDF were detected at all temperatures, with the maximum emission occurring at a flyash temperature of 350 degrees C, where the equivalent of over 42 times the total dioxin/furan concentration of the original flyash was lost to the vapour phase per unit mass of initial flyash. Although the desorbed species were mainly the lower mono- to tri-congener group of dioxins and furans, the desorbed dioxin/furans had a considerable toxic equivalent value.     

Nanotechnology, risk and the environment: a review

Nanotechnologies are already interacting with the environment. Scientists and engineers are manipulating matter at the nanoscale, and these nanoscale processes and products are being used by industry in commercially available products. These products are either applied directly to the environment or end up in the environment through indirect pathways. This review examines the state of current environmental risk assessment of nanotechnologies. Nanotechnology is described generally, then both the possible benefits of nanotechnology and the risks are reviewed in a traditional way. Subsequently, a philosophical criticism of the traditional way of looking at risks is offered.