Online sorting of recovered wood waste by automated XRF-technology: part II. Sorting efficiencies

Sorting of waste wood is an important process practiced at recycling facilities in order to detect and divert contaminants from recycled wood products. Contaminants of concern include arsenic, chromium and copper found in chemically preserved wood. The objective of this research was to evaluate the sorting efficiencies of both treated and untreated parts of the wood waste stream, and metal (As, Cr and Cu) mass recoveries by the use of automated X-ray fluorescence (XRF) systems. A full-scale system was used for experimentation. This unit consisted of an XRF-detection chamber mounted on the top of a conveyor and a pneumatic slide-way diverter which sorted wood into presumed treated and presumed untreated piles. A randomized block design was used to evaluate the operational conveyance parameters of the system, including wood feed rate and conveyor belt speed. Results indicated that online sorting efficiencies of waste wood by XRF technology were high based on number and weight of pieces (70-87% and 75-92% for treated wood and 66-97% and 68-96% for untreated wood, respectively). These sorting efficiencies achieved mass recovery for metals of 81-99% for As, 75-95% for Cu and 82-99% of Cr. The incorrect sorting of wood was attributed almost equally to deficiencies in the detection and conveyance/diversion systems. Even with its deficiencies, the system was capable of producing a recyclable portion that met residential soil quality levels established for Florida, for an infeed that contained 5% of treated wood.     

Validating an evidence-based, self-rated fall risk questionnaire (FRQ) for older adults

Background

Falls are a common, serious, and often unrecognized problem facing older adults. The objective of this study was to provide an initial clinical and statistical validation for a public health strategy of fall risk self-assessment by older adults using a Fall Risk Questionnaire (FRQ).

Methods

Adults age 65 + (n = 40) were recruited at a Los Angeles Veterans Affairs (VA) medical facility and at a local assisted living facility. Participants completed the FRQ self-assessment and results were compared to a “gold standard” of a clinical evaluation of risks using the American/British Geriatrics Society guidelines to assess independent predictors of falls: history of previous falls, fear of falling, gait/balance, muscle weakness, incontinence, sensation and proprioception, depression, vision, and medications. For the comparison, we used an iterative statistical approach, weighing items based on relative risk.

Results

There was strong agreement between the FRQ and clinical evaluation (kappa = .875, p < .0001). Individual item kappa values ranged from .305-.832. After dropping one FRQ item (vision risk) because of inadequate agreement with the clinical evaluation (kappa = .139, p = .321), the final FRQ had good concurrent validity.

Conclusions

The FRQ goes beyond existing screening tools in that it is based on both evidence and clinical acceptability and has been initially validated with clinical examination data. A larger validation with longitudinal follow-up should determine the actual strength of the FRQ in predicting future falls.     

Experimental assessment on the moving capabilities of mobility-impaired disabled

To take into account reasonably the safety requirements of the disabled on emergency evacuation in the design, usage, management and emergency response of public places, the authors of this paper organized on-site experiments for 100 disabled individuals (40 people with no supporting tools, 20 people using a single crutch and 40 people two crutches) and 17 healthy people at a subway station in Beijing. The experiments were designed to measure the unimpeded free walking speed of the participants during horizontal and stair ascending/descending movement, and to assess the possible impact of passage width on movement speed. Based on the results of the tests, the authors systematically analyzed the speed variation patterns with disability grade, gender and passage width. The validity of the value of an important parameter for evacuation safety design in the prescribed fire codes in mainland China, the width of a single stream of people, is assessed. Finally the results of the experiments are compared with that from other researches to identify the similarities and differences between them.     

Planar detonation structure for chain-branching kinetics with large activation energy and small initiation rate

The structure of the steady planar detonation wave is analyzed for three-step chain-branching kinetics consistent with hydrogen–air chemistry. The initiation and chain-branching steps are described by an Arrhenius rate. Both are thermally neutral, so that heat release is due to termination. The initiation rate is typically very low and very stiff. As a result, a small fraction of the reactant is consumed in the initiation region, which is very long but ends in an exponential chain-branching explosion. Next, the reactant is rapidly converted into chain-branching radicals, within a very thin zone, which ends when the concentration of the chain-branching radical reaches a peak, because of reactant depletion. Finally, the termination step consumes the chain-branching radicals and releases heat within a region thicker than the peak zone, but much thinner than the initiation region. The analysis is based upon two assumptions: that the chain-branching activation energy is high and that initiation is slow. The structure of the initiation and chain-branching zones is different for post-shock states within or outside the explosion region in the chain-branching diagram. In the former situation, chain-branching is already stronger than termination at the von Neumann point, and vice versa. In the no-explosion case, the initiation zone becomes very long, while the little chain-branching specie produced by initiation is directly converted into product by the termination step. Temperature increases slowly until reaching the explosion curve, when chain-branching becomes stronger than termination. The subsequent structure is similar to the explosion case.     

Assessment of medical care costs of injuries due to alcohol-related motor vehicle crashes

The purpose of this study was to estimate the total medical care costs of individuals injured in motor vehicle crashes and in crashes where alcohol was involved. Crashes were studied that involved 2,728 vehicle occupants and 191 pedestrians with injuries as reported in 1979 by the National Accident Sampling System, a probability sample of all motor vehicle crashes occurring in the united States. Medical care costs were assigned by using Abbreviated Injury Scale codes in accordance with other published research. Determination of alcohol involvement was based on crash characteristics. Results indicate that 20.2 % of medical care costs for motor vehicle crash injuries may be due to crashes where alcohol was involved. It was estimated that alcohol-related motor vehicle crashes cost between $434 million and $483 million in medical care alone in the United States in 1979.     

Numerical simulation of hydrogen–air detonation for damage assessment in realistic accident scenarios

An accidental hydrogen release within an equipment enclosure may result in the presence of detonable mixture in a confined environment. From a safety standpoint, it is then useful to assess the potential for damage. In that context, numerical simulation of the sequence of events subsequent to detonative ignition provides a useful tool, although with obvious limitations. This article describes the procedure, summarizes two case studies, and reviews the limitations. First, a hydrogen dispersion pattern is obtained from numerical simulation of dispersion, using a commercial package designed primarily for incompressible flow. This dispersion cloud is then used as the initial condition in an inviscid, compressible, reactive flow simulation. To force detonative ignition, a sufficiently large amount of energy is deposited in a small region that corresponds to the ignition location. Chemistry is modeled using a single step Arrhenius model. Because the wave thickness is small compared with the computational domain, a fine mesh is needed, limiting the practicality of the process to two-dimensional geometries. This is the most significant limitation; it is conservative. The two cases described in the paper include an electrolyzer, in which a small release occurs, leading potentially to some damage to the enclosure, and a reformer, in which the consequences are potentially more serious.     

The influence of salinity on the rate of photosynthesis and abundance of some tropical phytoplankton

Several species of phytoplankton were grown in unialgal, but not bacteria-free, cultures. These clones when exposed to varying salinities, from 5 to 35, showed a marked increase in their rates of photosynthesis at low salinities. The optimum requirement of salinity, however, varied in different species. Observations on the relative abundance of phytoplankton in an estuary, where the salinity changes were fairly large, confirmed that, within limits, waters with low salinities support a greater abundance of phytoplankton in nature. The wide adaptability of phytoplankton to changes in salinity corresponds to the conditions brought about by the monsoon system along the southwest coast of India, where large dilutions are associated with the enrichment of water with nutrients.