Municipal solid wastes generated each year contain potentially useful and recyclable materials for composites. Simultaneously, interest is high for the use of natural fibers, such as flax (Linum usitatissimum L.), in composites thus providing cost and environmental benefits. To investigate the utility of these materials, composites containing flax fibers with recycled high density polyethylene (HDPE) were created and compared with similar products made with wood pulp, glass, and carbon fibers. Flax was either enzyme- or dew-retted to observe composite property differences between diverse levels of enzyme formulations and retting techniques. Coupling agents would strengthen binding between fibers and HDPE but in this study fibers were not modified in anyway to observe mechanical property differences between natural fiber composites. Composites with flax fibers from various retting methods, i.e., dew- vs. enzyme-retting, behaved differently; dew-retted fiber composites resulted in both lower strength and percent elongation. The lowest level of enzyme-retting and the most economical process produces composites that do not appear to differ from the highest level of enzyme-retting. Flax fibers improved the modulus of elasticity over wood pulp and HDPE alone and were less dense than glass or carbon fiber composites. Likely, differences in surface properties of the various flax fibers, while poorly defined and requiring further research, caused various interactions with the resin that influenced composite properties. 相似文献
The aim of this study was to investigate the influence of chemical leaching on permeability and Cd removal from fine-grained polluted soils. Column leaching experiments were conducted using two types of soils (i.e., artificially Cd-polluted loam and historically polluted silty loam). Chemical agents of CaCl2, FeCl3, citric acid, EDTA, rhamnolipid, and deionized water were used to leach Cd from the soils. Results showed that organic agents reduced permeability of both soils, and FeCl3 reduced permeability of loam soil, compared with inorganic agents and deionized water. Entrapment and deposition of colloids generated from the organic agents and FeCl3 treatments reduced the soil permeability. The peak Cd effluence from the artificially polluted loam columns was retarded. For the artificially polluted soils treated with EDTA and the historically polluted soils with FeCl3, Cd precipitates were observed at the bottom after chemical leaching. When Cd was associated with large colloid particles, the reduction of soil permeability caused Cd accumulation in deeper soil. In addition, the slow process of disintegration of soil clay during chemical leaching might result in the retardation of peak Cd effluence. These results suggest the need for caution when using chemical-leaching agents for Cd removal in fine-grained soils.
The content of fine sand (< 200 μm) in primary sludge is relatively high in Chongqing sewage treatment plant owing to the part of rainwater will be mixed with sand and discharged into the municipal pipe network. Due to the insufficient separation of the sand, different obstacles to subsequent treatment processes may increase equipment wear, reduce effective volume of the tank, or shorten the cleaning cycle. There is a common use of grit chamber for the separation. Nevertheless, the use of hydrocyclone shows an outstanding performance in cost effectiveness and ease operation. The primary sludge in a sewage plant in Chongqing was monitored, and the average concentration of total suspend solids (TSS), total sand content, and volatile suspended solid (VSS) were 40.25 g/L, 17.51 g/L, and 13.41 g/L, respectively. The size of sand in the sludge was small, and the sand below 30 μm accounted for about 70% of the total sand. It formed flocs with organic matter and was removed in subsequent process units. While the size between 30–200 μm, called fine sand, was the main separation object, accounted for about 28.5%. According to XRF and XRD analysis, the sludge composition was mainly composed of quartz (SiO2), plagioclase (Na(AlSi3O8)), and calcite (CaCO3), which were similar to the main mineral composition of surface sediments and mountain rocks in the main urban area of Chongqing. A single-factor experiment on two types (FX100 and FX50) of hydrocylones was conducted to determine their abilities concerning the separation of fine sand and enrichment of organic matters from primary sludge. FX100 and FX50 showed best performance in the case of P = 0.17 Mpa, underflow diameter (Du) = 18 mm and P = 0.20 Mpa, Du = 6 mm, respectively. The removal efficiency of fine sand by hydrocyclone FX50 was 71.39%. While, it had poor performance on organic matter enrichment and the removal efficiency of which was 17.38%. By contrast, the removal rate by FX100 reached 61.89% for fine sand and only 6.89% for organic matters detached. The superimposition effect did not appear in the serial experiments on hydrocylone FX100 and FX50, but the power is 3.5 times of that of single-stage hydrocylone FX100. Comprehensive consideration of the processing capacity per unit time and operating power, the hydrocylone FX100 was more suitable for actual operation.