Characterization, leachability and valorization through combustion of residual chars from gasification of coals with pine

This paper presents the study of the combustion of char residues produced during co-gasification of coal with pine with the aim of characterizing them for their potential use for energy. These residues are generally rich in carbon with the presence of other elements, with particular concern for heavy metals and pollutant precursors, depending on the original fuel used.The evaluation of environmental toxicity of the char residues was performed through application of different leaching tests (EN12457-2, US EPA-1311 TCLP and EA NEN 7371:2004). The results showed that the residues present quite low toxicity for some of pollutants. However, depending on the fuel used, possible presence of other pollutants may bring environmental risks.The utilization of these char residues for energy was in this study evaluated, by burning them as a first step pre-treatment prior to landfilling. The thermo-gravimetric analysis and ash fusibility studies revealed an adequate thermochemical behavior, without presenting any major operational risks.Fluidized bed combustion was applied to char residues. Above 700 °C, very high carbon conversion ratios were obtained and it seemed that the thermal oxidation of char residues was easier than that of the coals. It was found that the char tendency for releasing SO₂ during its oxidation was lower than for the parent coal, while for NO_X emissions, the trend was observed to increase NO_X formation. However, for both pollutants the same control techniques might be applied during char combustion, as for coal. Furthermore, the leachability of ashes resulting from the combustion of char residues appeared to be lower than those produced from direct coal combustion.     

Environmental management of construction and demolition waste in Kuwait

There is an increasing pressure on the construction industry to reduce costs and improve the quality of our environment. The fact is that both of these goals can be achieved at the same time. Although construction and demolition (C&D) constitutes a major source of waste in terms of volume and weight, its management and recycling efforts have not yet seen the light in Kuwait. This study focuses on recycling efforts leading to the minimization of the total C&D waste that is currently landfilled in Kuwait. This paper presents the current status of C&D waste disposal system in Kuwait and identifies the potential problems to the environment, people and economy. Then, it investigates alternative solutions to manage and control this major type of waste in an economically efficient and environmentally safe manner. Next, the paper describes the feasibility of establishing a C&D waste recycling facility in Kuwait. It concludes by highlighting the major benefits and bottleneck problems with such a recycling facility.     

Rural energy transitions in developing countries: a case of the Uttam Urja initiative in India

In most developing countries, at the household level, traditional burning of biomass or use of inefficient technologies for domestic applications like lighting is common, triggering concerns related to fuel or technology switching. The paper focuses on opportunities to promote cleaner energy options through development of value chains delivering improved energy efficiency and access in developing countries. We discuss the example of Uttam Urja, a field project involving the dissemination of photovoltaic lighting technologies in rural areas of India. We focus on the challenges of introducing radical innovations into the residential energy sector in developing countries. For the purpose of this paper the Uttam Urja project is conceptualized as an ‘experiment’ and analysed using the Strategic Niche Management (SNM) framework. The paper emphasizes that to effect socio-technical transitions to clean energy options on the ground, it is desirable to focus on technology customization and innovative financing to cater to the needs and concerns of end users.     

Assessment of antimicrobial activity of Catechu and its dyed substrate

The present study was undertaken to evaluate the antimicrobial activity of catechu in solution and % microbial reduction of dyed wool samples against Escherichia coli MTCC 443, Staphylococcus aureus MTCC 902, Candida albicans ATCC 10261 and Candida tropicalis ATCC 750, by using micro-broth dilution method, disc diffusion assay and growth curve studies. The dye showed the maximum antimicrobial activity at 20% w/v, inhibiting the microbial growth by more than 90%. In the next set of the experiments the antimicrobial activity of the dye was compared on woollen yarn alone and on pre-mordanted samples. The reduction in antimicrobial activity was observed when mordanted samples were examined. K/S, CIELab values and fastness properties of the dyed samples were assessed. The structural morphology of woollen yarn was also evaluated using scanning electron microscopy (SEM). Haemolytic activity on human erythrocytes was studied to exclude possibility of further associated cytotoxicity. The observed antimicrobial characteristics and negligible cytoxicity of catechu indicate that the dye might be a promising antimicrobial agent for developing bioactive textile materials and clothing.     

Recent trends in treatment technologies of emerging contaminants

In the recent years a group of contaminants, known collectively as emerging contaminants (ECs), have attracted considerable attention due to their widespread in the environment, and lack of knowledge on their impacts on ecosystem and human health. This review gives an overview on the sources, impacts, and conventional treatment technologies of ECs and an in-depth review of the literature on the state-of-the-art treatment technologies and their performance in the removal of ECs from water sources and drinking water. A careful statistical analysis of the number of publications on the different treatment technologies of ECs was performed to identify the hot spots in this research area. Conventional treatment technologies are not able to remove ECs sufficiently. The discharge of raw or partially treated wastewater is the main source of ECs in the environment. The research in recent years is focusing on using advanced treatment process (AOPs), followed by adsorption and membrane technologies. From a technical point of view, AOPs surpass other treatment technologies as they can completely eradicate ECs without the generation of side products. Developing efficient, green, and cost-effective materials to be used as adsorbents, photocatalysts, membranes, or membrane fillers, is one of the main research trends nowadays. Combined AOPs based on exploiting solar light, ultrasound and electrochemistry are gaining growing interest and show high potential for the treatment of ECs.     

The ameliorative effects of ceftriaxone and vitamin E against cisplatin-induced nephrotoxicity

Environmental Science and Pollution Research - Nephrotoxicity is a common adverse effect of treatment with cisplatin (CDDP). This study was performed to evaluate the antioxidant and...     

Utilization of Modified Attapulgite for the Removal of Sr(II), Co(II), and Ni(II) Ions from Multicomponent System,Part I: Kinetic Studies

Radionuclide sorption by natural and modified clays is extensively accepted to be an important process from the radioactive waste point of view. This work focused on modification of natural attapulgite with a layered double hydroxide to produce a novel chemisorbent for Sr2+, Ni2+, and Co2+ removal from multicomponent solution. The structural and surface characteristics of both attapulgite (ATP) and modified attapulgite (LDH-ATP) were investigated using XRD, FTIR, SEM, and thermal analysis. Comparison of sorption features of Sr2+, Ni2+, and Co2+ onto ATP and LDH-ATP was achieved; the results indicated that LDH-ATP was the most efficient sorbent for Sr2+, Ni2+, and Co2+. Kinetic studies established that the sorption is fast and reaching >90% within 30 min. The sorption of Sr2+, Ni2+, and Co2+ are well defined by non-linear pseudo-second-order model and controlled by an intra-particle diffusion mechanism. The diffusivity was determined using homogeneous surface diffusion (HSDM) model and found in the order 10−13 m2/min; this confirmed that the sorption of the three ions is chemisorption process. LDH-ATP can be employed as a candidate chemisorbent for the removal of some metal ions from waste solution.     

Optimization and in line potentiometric monitoring of enhanced photocatalytic degradation kinetics of gemifloxacin using TiO2 nanoparticles/H2O2

Environmental Science and Pollution Research - Gemifloxacin (GEM) is a broad-spectrum quinolone antibiotic. The presence of GEM residuals in industrial and hospital wastewater has been associated...     

Evaluation of Noise Pollution in Urban Parks

The present study provides an evaluation of noise pollution in six Urban Parks located in the city of Curitiba, Brazil. Equivalent noise levels (L _eq) were measured in 303 points (each point measured during 3 min) spread throughout the Parks. Measured values were confronted with local legislation (Law 10625) allowed limits, and the Parks were thus classified as “acoustically polluted or unpolluted”. Measured values were also evaluated according to international legislation: Decree no. 12 of the City Council of Rome, DIN 18005 for German cities, the World Health Organization, and the United States Environmental Protection Agency. Urban parks in the downtown area of Curitiba, surrounded by roads of heavy traffic and in the midst of intense commercial activities, do not satisfy any of the standards used. The most noise-polluted parks in Curitiba were the Public Walk Park and the Botanical Garden Park, with measured L _eq of 64.8 dB(A) and 67 dB(A).     

Quality of wastewater reuse in agricultural irrigation and its impact on public health

This study is planned to perform a sanitary survey of the largest sewage treatment plant in Riyadh, KSA, fortnightly for 6 months to examine its effluent quality as an example for the growing dependence on reuse of treated municipal wastewater in agricultural irrigation purposes to cope with increasing water shortage. The biological and physico-chemical parameters of 12 wastewater samples from the plant were examined using standard methods. The physico-chemical analysis indicated that the surveyed municipal wastewater treatment plant contained some of the studied parameters, such as turbidity, total suspended solids, biochemical oxygen demand, chemical oxygen demand and residual chlorine above the maximum permissible wastewater limits set by the Saudi Standards. However, heavy metal concentrations in all samples were lower than the recommended standards. Total and faecal coliform counts were above the permissible limits indicating poor sanitation level. Fifty percent of all wastewater samples were contaminated with faecal coliforms but, surprisingly, Escherichia coli were only detected in 8.3 % of the samples. Regular monitoring and enhancement of microbial and physico-chemical parameters of the wastewater quality served by different wastewater treatment plants for reuse in agricultural irrigation is recommended to preserve the environment and public health.