Efficiency of perchlorate consumption in road flares, propellants and explosives

When an explosive detonates or a propellant or flare burns, consumption of the energetic filler should be complete but rarely is, especially in the presence of large amounts of non-combustible materials. Herein we examine three types of perchlorate-containing devices to estimate their potential as sources of contamination in their normal mode of functioning. Road flares, rocket propellants and ammonium nitrate (AN) emulsion explosives are potentially significant anthropogenic sources of perchlorate contamination. This laboratory evaluated perchlorate residue from burning of flares and propellants as well as detonations of ammonium nitrate emulsion explosives. Residual perchlorate in commercial products ranged from 0.094 mg perchlorate per gram material (flares) to 0.012 mg perchlorate per gram material (AN emulsion explosives). The rocket propellant formulations, prepared in this laboratory, generated 0.014 mg of perchlorate residue per gram of material.     

A study of the effect of physical and chemical stressors on biological integrity within the San Diego hydrologic region

Environmental agencies across the United States have searched for adequate methods to assess anthropogenic impacts on the environment. Biological assessments, which compare the taxonomic composition of an aquatic assemblage to relevant biocriteria, have surfaced as an effective method to assess the ecological integrity of US waterbodies. In this study, bioassessment data were collected and analyzed in conjunction with physical habitat and chemical stressor data for streams and rivers within the San Diego basin from 1998 through 2005. Physical stressors such as sediment loading, riparian destruction, and in-stream habitat homogenization affect many locations in the region. However, physical habitat measures alone were found to frequently overestimate the biological integrity of streams in the region. Many sites within the San Diego Basin, although unaffected by physical stressors, continue to exhibit low biological integrity scores. Sites with low biological integrity tend to possess higher specific conductance and salinity compared to sites with high biological integrity. We suggest that one possible reason for these differences is the source water used for municipal purposes.     

Interlaboratory evaluation of trace element determination in workplace air filter samples by inductively coupled plasma mass spectrometry

Inductively coupled plasma mass spectrometry (ICP-MS) is becoming more widely used for trace elemental analysis in the occupational hygiene field, and consequently new ICP-MS international standard procedures have been promulgated by ASTM International and ISO. However, there is a dearth of interlaboratory performance data for this analytical methodology. In an effort to fill this data void, an interlaboratory evaluation of ICP-MS for determining trace elements in workplace air samples was conducted, towards fulfillment of method validation requirements for international voluntary consensus standard test methods. The study was performed in accordance with applicable statistical procedures for investigating interlaboratory precision. The evaluation was carried out using certified 37-mm diameter mixed-cellulose ester (MCE) filters that were fortified with 21 elements of concern in occupational hygiene. Elements were spiked at levels ranging from 0.025 to 10 μg filter(-1), with three different filter loadings denoted "Low", "Medium" and "High". Participating laboratories were recruited from a pool of over fifty invitees; ultimately twenty laboratories from Europe, North America and Asia submitted results. Triplicates of each certified filter with elemental contents at three different levels, plus media blanks spiked with reagent, were conveyed to each volunteer laboratory. Each participant was also provided a copy of the test method which each participant was asked to follow; spiking levels were unknown to the participants. The laboratories were requested to prepare the filters by one of three sample preparation procedures, i.e., hotplate digestion, microwave digestion or hot block extraction, which were described in the test method. Participants were then asked to analyze aliquots of the prepared samples by ICP-MS, and to report their data in units of μg filter(-1). Most interlaboratory precision estimates were acceptable for medium- and high-level spikes (RSD <25%), but generally yielded greater uncertainties than were anticipated at the outset of the study.     

Evaluation of Selected Gaseous Halocarbons for Use in source Test Performance Audits

A repository of 38 gaseous organic compounds in compressed gas cylinders has been established by EPA. This repository was established to provide standards for source test performance audits, that is, quantitative quality assurance tests. Among these compounds are ten halogenated organic species, which are the focus of this paper.

Stability studies of all ten compounds have been performed to determine the feasibility of using them as performance audit standards. Results indicate that all of the halocarbons tested are adequately stable to be used as reliable audit standards.

Subsequent to completion of stability studies, four of the ten halocarbons were used in source test performance audits. Results are available at this time for two of the four compounds; the results show agreement within 10% of the concentrations previously established by Research Triangle Institute.     

A New Audit Technique for EPA Method 25

A simple, inexpensive, and accurate technique for evaluating or auditing the sampling, recovery, and analytical phases of EPA Source Reference Method 25 has been developed. The technique involves spiking a U-shaped stainless steel cartridge containing Tenax® with known quantities of selected organic compounds and thermally desorbing them at temperatures from 160°C to 180°C to generate organic vapors quantitatively. The major advantages of this technique are that no other measurement methods can be used to determine the generated organic concentrations in lieu of Method 25; and that the cartridge can easily be taken to the field for evaluation. The organic compounds generated in test runs are collected and analyzed using the Method 25 procedure. The generation of organics is quantitative and recoveries were found to be 100 ± 10%. The time required for desorption of the majority of organics is generally less than forty-five minutes at a flow rate of 100 mL/min; however, based on laboratory experience the recommended sampling time is sixty minutes. These spiked cartridges are stable at room temperature over a two-month period. Results of interlaboratory studies showed close agreement with the expected concentrations based on calculations from the mass loadings and sample volumes.     

Legal and technical defensibility of data and the Triad approach

The Triad approach was developed primarily to limit decision uncertainty during cleanups at hazardous waste sites. The fundamental principles of the Triad approach include development of a site characterization model and use of emerging technologies, which can provide data at a higher density than could be affordably collected using traditional data collection methodologies, to refine the model in essentially real time. New data formats are used collaboratively with data in traditional formats to iteratively pin down the relative concentration, nature, and extent of contaminants, thus minimizing decision uncertainties. This article examines the potential admissibility as evidence in legal proceedings of data collected by technologies designed to improve the density of information that are commonly used during the course of Triad‐type projects. The article explains that such criteria may vary depending on the purpose for which the evidence is to be used (e.g., as direct evidence to prove site conditions or as support for the testimony of an expert witness) and the court in which the legal proceeding would take place (e.g., federal court or state court). Admissibility in federal courts of data both as direct evidence and as support for expert witness testimony is covered. © 2005 Wiley Periodicals, Inc.     

INACTIVATION OF GIARDIA MURIS CYSTS BY CHLORAMINES1

ABSTRACT: In a study to measure the efficacy of chioramines at inactivating Giardia cysts, the ability of cysts to excyst was measured after exposure to different concentrations of chloramines, for different times, and at different temperatures and pH. The chloramines were generated by mixing ammonium sulfate and sodium hypochlorate in water to approximate a 7:1 chlorine:ammonia ratio by weight. Times of 40, 80, 180, and 270 minutes; temperatures of 3, 10, and 18°C; target chioramine concentrations of 0.4, 1.4, 2.0, and 2.6 mg/L; and pH of 7.0 and 8.5 were the actual values tested. The combinations of these variables that were able to inactivate >99.8 percent of the cysts were a minimum chloramine concentration of 2.26 mg/L applied for 270 minutes at a water temperature of 10°C; and at 18°C, averaged minimum chloramine concentrations of 2.14 and 1.55 mg/L applied for 180 and 270 minutes, respectively. The minimum CT values corresponding to these combinations capable of >99.8 percent cyst inactivation, are 610 at 10°C and 385 at 18°C. Temperature was noted to exert a major effect on the ability of chloramines to inactivate cysts. Modifications of the methods used to generate chloramines may have an effect on the capacity of this disinfectant to inactivate cysts.     

SIMULATION AND DECISIONMAKING: THE PLATTE RIVER BASIN IN NEBRASKA1

Substantial conflict exists over water management and allocation in the Platte River Basin of Nebraska. An interdisciplinary computer simulation model, representing the water quantity, water quality, environmental, and economic dimensions of the conflict, was developed in order to analyze the tradeoffs among allocation scenarios. Most importantly, decisionmakers and interest groups were involved in model development. Simulation results for a base case and two scenarios are presented. One scenario favors protection of instream flow for wildlife; the other favors water diversions for agriculture. Impacts of the instream flow scenario, as measured by the amount of land irrigated, groundwater levels, the amount of wildlife habitat for cranes and catfish, and net agricultural benefits did not differ greatly from those of the base case. However, impacts of the diversion scenario were substantial. On the negative side, instream flows and wildlife habitat declined an average of 39 percent; while, on the positive side, groundwater levels and net agricultural benefits each increased 6 percent. The modeling process was successful insofar as it promoted an understanding among the highly diverse interest groups of the systems nature of the Basin. One agreement on a water diversion schedule among three of the parties has been reached, partly as a result of this process. More comprehensive compromises have not yet been forged. Our experience, however, indicates that modeling success at the policymaking level depends more on the extent to which the policymakers understand the model than it does on model sophistication.