Crop–livestock interactions along agro-ecological gradients: a meso-level analysis in the Indo-Gangetic Plains, India

Although conceptually simple and often idealized, disentangling crop–livestock interactions typically proves more complex in practice. Part of the complexity arises from their changing nature along agricultural intensification gradients. Such interactions increase in scope when extensive systems intensify, but decline in importance as already intermediate systems intensify further. This changing nature of crop–livestock interactions in relation to the system’s developmental stage implies that these exchanges can both contribute but also undermine system sustainability. We examine crop–livestock interactions in the Indo-Gangetic Plains as an empirical case, drawing from village surveys to explore and illustrate these relations and implications along the agro-ecological gradient of this vast and important eco-region. Such an understanding is increasingly needed as adapting crop residue management practices is recognized as the key to address sustainability concerns in the prevailing rice–wheat systems and as a stepping stone towards conservation agriculture. The agricultural R&D community needs to incorporate this understanding more proactively into its R&D agenda if it is to succeed in sustaining productivity gains, improving rural livelihoods equitably, and securing environmental sustainability.     

Fall from equipment injuries in U.S. mining: Identification of specific research areas for future investigation

Introduction

The objective of this study was to evaluate the circumstances leading to fall from equipment injuries in the mining industry.

Method

The 2006 and 2007 Mine Safety and Health Administration annual injury databases were utilized for this study whereby the injury narrative, nature of injury, body part injured, mine type, age at injury, and days lost were evaluated for each injury.

Results

The majority of injuries occurred at surface mining facilities (∼ 60%) with fractures and sprains/strains being the most common injuries occurring to the major joints of the body. Nearly 50% of injuries occurred during ingress/egress, predominately during egress, and approximately 25% of injuries occurred during maintenance tasks. The majority of injuries occurred in relation to large trucks, wheel loaders, dozers, and conveyors/belts. The severity of injury was independent of age and the median days lost was seven days; however, there was a large range in severity.

Impact on industry

From the data obtained in this study, several different research areas have been identified for future work, which include balance and stability control when descending ladders and equipment design for maintenance tasks.     

Relation between mechanochemical dechlorination rate of polyvinyl chloride and mill power consumption

A sample of polyvinyl chloride (PVC) powder was milled with CaO powder in a planetary mill for various mill operational parameters. The milled product consisted of dechlorinated hydrocarbon and water-soluble CaOHCl. The dechlorination rate of PVC was determined by the concentration of Cl⁻ ions measured in solution after dispersing the milled product in water. To evaluate the power consumption during PVC dechlorination, the mill power consumption was measured during each experimental run. In addition, media motion during planetary milling was simulated using the discrete element method (DEM), enabling calculation of the mill power consumption. The power consumption calculated by the DEM simulation compared well with the power consumption measured experimentally. The dechlorination rate correlated well with the specific mill power consumption, regardless of the sample weight. The dechlorination rate of PVC when milled with oyster shells (CaCO₃) was observed to be faster than that of the PVC/CaO system, and oyster shells could be used as a reactant for the treatment of PVC wastes. This work should be useful for the design of a reactor for the dechlorination of PVC. Chemical Feedstock Recycling & Other Innovative Recycling Techniques 6     

Solvent-Free Polymerization of l-Aspartic Acid in the Presence of d-Sorbitol to Obtain Water Soluble or Network Copolymers

l-Aspartic acid was thermally polymerized in the presence of d-sorbitol with the goal of synthesizing new, higher molecular weight water soluble and absorbent copolymers. No reaction occurred when aspartic acid alone was heated at 170 or 200 °C. In contrast, heating sorbitol and aspartic acid neat or with ammonium hydroxide gave a mixture of water soluble and insoluble copolymers of polysuccinimide and sorbitol. In the presence of phosphoric acid, sorbitol aspartate ester copolymers having both water soluble and highly swollen gel components were formed. These results indicate that polysaccharides such as sorbitol can readily react to form copolymer ester/amides with aspartic acid and such copolymers may have utility as biodegradable water soluble and swellable polyampholytes.     

Using SWAT to Model Streamflow in Two River Basins With Ground and Satellite Precipitation Data1

Abstract: Both ground rain gauge and remotely sensed precipitation (Next Generation Weather Radar – NEXRAD Stage III) data have been used to support spatially distributed hydrological modeling. This study is unique in that it utilizes and compares the performance of National Weather Service (NWS) rain gauge, NEXRAD Stage III, and Tropical Rainfall Measurement Mission (TRMM) 3B42 (Version 6) data for the hydrological modeling of the Middle Nueces River Watershed in South Texas and Middle Rio Grande Watershed in South Texas and northern Mexico. The hydrologic model chosen for this study is the Soil and Water Assessment Tool (SWAT), which is a comprehensive, physical‐based tool that models watershed hydrology and water quality within stream reaches. Minor adjustments to selected model parameters were applied to make parameter values more realistic based on results from previous studies. In both watersheds, NEXRAD Stage III data yields results with low mass balance error between simulated and actual streamflow (±13%) and high monthly Nash‐Sutcliffe efficiency coefficients (NS > 0.60) for both calibration (July 1, 2003 to December 31, 2006) and validation (2007) periods. In the Middle Rio Grande Watershed NEXRAD Stage III data also yield robust daily results (time averaged over a three‐day period) with NS values of (0.60‐0.88). TRMM 3B42 data generate simulations for the Middle Rio Grande Watershed of variable qualtiy (MBE = +13 to ?16%; NS = 0.38‐0.94; RMSE = 0.07‐0.65), but greatly overestimates streamflow during the calibration period in the Middle Nueces Watershed. During the calibration period use of NWS rain gauge data does not generate acceptable simulations in both watersheds. Significantly, our study is the first to successfully demonstrate the utility of satellite‐estimated precipitation (TRMM 3B42) in supporting hydrologic modeling with SWAT; thereby, potentially extending the realm (between 50°N and 50°S) where remotely sensed precipitation data can support hydrologic modeling outside of regions that have modern, ground‐based radar networks (i.e., much of the third world).     

Speciation of metals in contaminated sediments from Oskarshamn Harbor,Oskarshamn, Sweden

Bottom sediments in coastal regions have been considered the ultimate sink for a number of contaminants, e.g., toxic metals. In this current study, speciation of metals in contaminated sediments of Oskarshamn harbor in the southeast of Sweden was performed in order to evaluate metal contents and their potential mobility and bioavailability. Sediment speciation was carried out by the sequential extraction BCR procedure for As, Cd, Cr, Cu, Hg, Ni, Pb, and Zn and the exchangeable (F1), reducible (F2), oxidizable (F3), and residual (R) fractions were determined. The results have shown that Zn and Cd were highly associated with the exchangeable fraction (F1) with 42–58 % and 43–46 %, respectively, of their total concentrations in the mobile phase. The assessment of sediment contamination on the basis of quality guidelines established by the Swedish Environmental Protection Agency (SEPA) and the Italian Ministry of Environment (Venice protocol for dredged sediments) has shown that sediments from Oskarshamn harbor are highly contaminated with toxic metals, especially Cu, Cd, Pb, Hg, As, and Zn posing potential ecological risks. Therefore, it is of crucial importance the implementation of adequate strategies to tackle contaminated sediments in coastal regions all over the world.     

Arsenic and copper stabilisation in a contaminated soil by coal fly ash and green waste compost

In situ metal stabilisation by amendments has been demonstrated as an appealing low-cost remediation strategy for contaminated soil. This study investigated the short-term leaching behaviour and long-term stability of As and Cu in soil amended with coal fly ash and/or green waste compost. Locally abundant inorganic (limestone and bentonite) and carbonaceous (lignite) resources were also studied for comparison. Column leaching experiments revealed that coal fly ash outperformed limestone and bentonite amendments for As stabilisation. It also maintained the As stability under continuous leaching of acidic solution, which was potentially attributed to high-affinity adsorption, co-precipitation, and pozzolanic reaction of coal fly ash. However, Cu leaching in the column experiments could not be mitigated by any of these inorganic amendments, suggesting the need for co-addition of carbonaceous materials that provides strong chelation with oxygen-containing functional groups for Cu stabilisation. Green waste compost suppressed the Cu leaching more effectively than lignite due to the difference in chemical composition and dissolved organic matter. After 9-month soil incubation, coal fly ash was able to minimise the concentrations of As and Cu in the soil solution without the addition of carbonaceous materials. Nevertheless, leachability tests suggested that the provision of green waste compost and lignite augmented the simultaneous reduction of As and Cu leachability in a fairly aggressive leaching environment. These results highlight the importance of assessing stability and remobilisation of sequestered metals under varying environmental conditions for ensuring a plausible and enduring soil stabilisation.     

Increased functionality of methyl oleate using alkene metathesis

A series of alkene cross-metathesis reactions were performed using a homogeneous ruthenium-based catalyst. Using this technology, a variety of functional groups can be incorporated into the bio-based starting material, methyl oleate. Trans-stilbene, styrene, methyl cinnamate and hexen-3-ol have all been shown to give desirable products. Using this technology, aromatics, alcohols or additional esters can be incorporated into the products. For example, the cross-metathesis reaction of methyl oleate with methyl cinnamate by the second-generation Grubbs catalyst showed 70% conversion of methyl oleate into products where half of the observed products contain an aromatic group and over one-third of the products contain an α,β-unsaturated methyl ester. This promising green route is versatile, and with an appropriate selection of starting materials, it is applicable to the synthesis of polymer precursors, industrial fluids or any other application where the upgrade of natural oils is necessary.