Urinary dialkyl phosphate levels before and after first season chlorpyrifos spraying amongst farm workers in the Western Cape,South Africa

The study investigated urinary levels of dialkyl phosphates resulting from pesticide exposure amongst 40 farm workers. Workers were tested (urinary dialkyl phosphate levels, anthropometry, short exposure questionnaire) before and after the first day of seasonal chlorpyrifos spraying. Median baseline urinary dialkyl phosphates was high amongst both non-applicators (1587.5 μg/g creatinine, n = 8) and applicators (365.6 μg/g creatinine, n = 9). There was not much evidence of an increase in post-spray dialkyl phosphates levels from pre-spray levels amongst both applicators and non-applicators. Hours mixing, spraying, driving a tractor and hours worked by non-applicators were not significantly associated with an increase in post-spray dialkyl phosphate levels, adjusting for age, height, weight, gender, use of empty pesticide containers and self-reported kidney problems. Past applicator status was weakly positively associated with pre-spray dialkyl phosphate levels adjusting for age, height, weight, and gender, self-reported kidney problems, smoking and alcohol (β= 1019.5, p = 0.307, R²= 0.28). The high dialkyl phosphate levels call for an epidemiological investigation into the health effects of organophosphorous pesticides.     

The Onset of Electrical Breakdown in Dust Layers: II. Effective Dielectric Constant and Local Field Enhancement

Part I of this work has shown that electrical breakdown in dust layers obeys Paschen's Law, but occurs at applied field values which appear too small to initiate the breakdown. In this paper we will show how an effective dielectric constant characterizing the dust layer can be determined from ac dielectric measurements and the theory of Debye. When combined with an expression for the enhanced local electric field in the void spaces between particles in the layer, field strengths which are large enough to initiate electrical breakdown in the layer are predicted at relatively low values of applied field. The effect of temperature and dust layer thickness on the onset of electrical breakdown within the dust layer can also be explained by the dependence of the effective dielectric constant on these parameters.     

The Development of a Charging/Collecting Device for High Resistivity Dust Using Cooled Electrodes

A charging/collecting device for high-resistivity fly ash has been developed which controls back ionization by cooling the collector electrode internally with water. The device consists of parallel 6.0 cm pipes with corona wires suspended between the pipes. The pipes provide a simple means of interfacing with a cooling water system and also minimizing the collector area needing to be cooled. By cooling the pipes with 38°C (100°F) water, back ionization is eliminated and average field strengths of 7 kV/cm can be achieved with fly ash having a resistivity > 10¹² ω-cm. Results of tests on an actual flue gas stream and plans for future testing are described. Initial tests using heated instead of cooled electrodes are described as well as other tests that lead to the present design. The results of tests with the heated electrode show the kind of improvements in performance that can be obtained when resistivity is controlled in only a small collection area.     

Prediction of Traffic Noise: A Screening Technique

Abstract

Traffic noise is ubiquitous in many communities and is an important environmental concern, especially for persons located near major roadways. Several different methods are available to estimate noise levels resulting from roadway traffic. These include computational, graphical, and computer modeling techniques.

The prediction methodology presented here is a simplified technique that can be used for estimating noise resulting from traffic and for screening traffic noise impacts. This Traffic Noise Screening (TNS) approach consists of a series of traffic noise level prediction graphs developed for different roadway configurations. The graphs are based on the results from using the Federal Highway Administration (FHWA) STAMINA2.0 computerized noise prediction model for various scenarios. Data inputs to the TNS approach include roadway geometries, traffic volumes, vehicle travel speed, and centerline distance to the receptors.

The TNS graphs allow easy estimation of traffic noise levels for use in predicting traffic-related noise impacts. This TNS approach is not intended as a substitute for detailed modeling, such as with STAMINA2.0, but as a screening tool to aid in determining when detailed modeling may be necessary. If screening results indicate that noise estimates are significant, or if the scenario is rather complex, then additional, more detailed modeling can be performed.     

A Comparison of Nonlinear Regression and Neural Network Models for Ground-Level Ozone Forecasting

ABSTRACT

A hybrid nonlinear regression (NLR) model and a neural network (NN) model, each designed to forecast next-day maximum 1-hr average ground-level O₃ concentrations in Louisville, KY, were compared for two O₃ seasons—1998 and 1999. The model predictions were compared for the forecast mode, using forecasted meteorological data as input, and for the hindcast mode, using observed meteorological data as input. The two models performed nearly the same in the forecast mode. For the two seasons combined, the mean absolute forecast error was 12.5 ppb for the NLR model and 12.3 ppb for the NN model. The detection rate of 120 ppb threshold exceedances was 42% for each model in the forecast mode. In the hindcast mode, the NLR model performed marginally better than the NN     

Diagnosis of dissolved organic matter removal by GAC treatment in biologically treated papermill effluents using advanced organic characterisation techniques

Granular activated carbon (GAC) exhaustion rates on pulp and paper effluent from South East Australia were found to be a factor of three higher (3.62 cf. 1.47 kg m⁻³) on Kraft mills compared to mills using Thermomechanical pulping supplemented by Recycled Fibre (TMP/RCF). Biological waste treatment at both mills resulted in a final effluent COD of 240 mg L⁻¹. The dissolved organic carbon (DOC) was only 1.2 times higher in the Kraft effluent (70 vs. 58 mg L⁻¹), however, GAC treatment of Kraft and TMP/RCF effluent was largely different on the DOC persisted after biological treatment. The molecular mass (636 vs. 534 g mol⁻¹) and aromaticity (5.35 vs. 4.67 L mg⁻¹ m⁻¹) of humic substances (HS) were slightly higher in the Kraft effluent. The HS aromaticity was decreased by a factor of 1.0 L mg⁻¹ m⁻¹ in both Kraft and TMP/RCF effluent. The molecular mass of the Kraft effluent increased by 50 g mol⁻¹ while the molecular mass of the TMP/RCF effluent was essentially unchanged after GAC treatment; the DOC removal efficiency of the GAC on Kraft effluent was biased towards the low molecular weight humic compounds. The rapid adsorption of this fraction, coupled with the slightly higher aromaticity of the humic components resulted in early breakthrough on the Kraft effluent. Fluorescence excitation-emission matrix analysis of the each GAC treated effluent indicated that the refractory components were higher molecular weight humics on the Kraft effluent and protein-like compounds on the TMP/RCF effluent. Although the GAC exhaustion rates are too high for an effective DOC removal option for biologically treated pulp and paper mill effluents, the study indicates that advanced organic characterisation techniques can be used to diagnose GAC performance on complex effluents with comparable bulk DOC and COD loads.     

Validation and use of in vivo solid phase micro-extraction (SPME) for the detection of emerging contaminants in fish

A variety of emerging chemicals of concern are released continuously to surface water through the municipal wastewater effluent discharges. The ability to rapidly determine bioaccumulation of these contaminants in exposed fish without sacrificing the animal (i.e. in vivo) would be of significant advantage to facilitate research, assessment and monitoring of their risk to the environment. In this study, an in vivo solid phase micro-extraction (SPME) approach was developed and applied to the measurement of a variety of emerging contaminants (carbamazepine, naproxen, diclofenac, gemfibrozil, bisphenol A, fluoxetine, ibuprofen and atrazine) in fish. Our results indicated in vivo SPME was a potential alternative extraction technique for quantitative determination of contaminants in lab exposures and as well after exposure to two municipal wastewater effluents (MWWE), with a major advantage over conventional techniques due to its ability to non-lethally sample tissues of living organisms.     

Dioxin-like compounds in Australian sewage sludge--review and national survey

An Australian survey of dioxin-like compounds in sewage sludge was conducted in two parts (a) a national survey, and (b) a time-study. All sewage sludge samples analysed as part of these studies had low overall concentrations of dioxin-like compounds. Out of 37 samples, all except one, were within the reported concentration range of soil within the Australian environment. The mean concentration of dioxin-like compounds in the Australian sewage sludge survey of 2006 was found to be 5.6 (s.d. 4.5) ng WHO(05) TEQkg(-1) (n=14) and were within the range of 1.2-15.3 ng WHO(05) TEQ kg(-1). All the Australian sewage sludge samples cited in these studies were below the Victorian EPA "investigation limit" of 50 ng WHO(98) TEQ kg(-1), and well below the European proposed guidelines of 100 ng I-TEQ kg(-1). The burden of dioxin-like compounds in Australian sewage sludge is low and its land application as biosolids is not likely to pose a problem. A general positive relationship was found between population of the town producing the waste and both dioxin-like PCDD/Fs and dioxin-like PCBs. The one exception to this trend was sludge from a town that had a history of smelting and had a relatively high burden of dioxin-like compounds. Sludge from one rural WWTP also had a higher burden of dioxin-like compounds. The treatment plant services a geographically isolated town with a low population and no known emitters of dioxin-like compounds. However, this sample also had a relatively high burden of dioxin-like PCBs, which could be the source of the dioxin-like PCDD/Fs found in this sludge. The time study analyzing sludges from three WWTP from the same city between the years 2002 and 2006 found no apparent difference between WWTPs, but a statistically significant decline of 1.49 ng WHO(05) TEQ kg(-1) per year. Also, a comprehensive review of the scientific literature, presents typical levels and sources of dioxin-like compounds in international sewage sludges.     

Polybrominated diphenyl ethers (PBDEs) in human milk from Australia

Polybrominated diphenyl ethers (PBDEs) are flame retardants added to a multitude of products to reduce flammability. PBDEs have been widely detected and quantified in biota and humans in many industrialised countries from the Northern Hemisphere. However data concerning the levels of these compounds in the Australian population and environment remain limited. The objectives of this study were to determine PBDE concentrations and congener profiles in Australian human milk and compare this to concentrations found in other countries. Pooled human milk samples obtained from mothers residing in 12 regions of Australia were analysed by HRGC/HRMS for 18 PBDE congeners. In total, 157 human milk samples collected in 2002 and 2003 were divided into 17 regional pools. PBDEs were detected in all pools of human milk from Australia. The mean+/-standard deviation and median summation operatorPBDE concentrations were 11.1+/-3.2 and 11.0 ng g(-1) lipid, respectively with a range of 6.1-18.7 ng g(-1) lipid. The congener profile was dominated by BDE-47 followed by BDE-99, -100, -153, -154 and -183. Regional differences were evaluated, but no trends were observed. The data suggest regional differences are likely to be small if they exist at all. The concentrations of PBDEs found in Australian human milk were lower than those reported from North America but higher than those reported from Europe and Asia. Our results suggest that the exposure pathways which contribute to the PBDE body burden in the Australian population require a better understanding in order to determine future policy regarding their use and disposal.