Variations in the Emissions of Volatile Organic Compounds from the Toner for a Specific Photocopier

ABSTRACT

A laboratory thermal desorption apparatus was used to measure emissions from a number of nominally identical photocopier toners—manufactured to meet the specifications of one specific model copier—when these toners were heated to fuser temperature (180-200 °C). The objective was to assess how potential volatile organic compound (VOC) emissions from the toner for a given copier can vary, depending upon the production run and the supplier. Tests were performed on a series of toner (and associated raw polymer feedstock) samples obtained directly from a toner manufacturer, representing two production runs using a nonvented extrusion process, and on toner cartridges purchased from two local retailers, representing three different production lots (histories unknown). The results showed that the retailer toners consistently had up to 350% higher emissions of some major compounds (expressed as |ig of compound emit-ted/g of toner), and up to 100% lower emissions of others, relative to the manufacturer toners (p ≤ 0.01). The manufacturer toners from one production run had emissions of certain compounds, and of total VOCs, that were modestly higher (13-18%) than those from the other run (p ≤ 0.01). The emission differences between the retailer and manufacturer toners are probably due to differences     

A Cost-Effective Weighing Chamber for Particulate Matter Filters

ABSTRACT

Particulate matter (PM) is a ubiquitous air pollutant that has been receiving increasing attention in recent years due in part to the association between PM and a number of adverse health outcomes, including mortality and increases in emergency room visits and respiratory symptoms, as well as exacerbation of asthma and decrements in lung function.^1-5 As a result, the ability to accurately sample ambient PM has become important, both to researchers and to regulatory agencies. The federal reference method for the determination of fine PM as PM_2.5 in the atmosphere recommends that particle-sampling filters be conditioned and weighed in an environment with constant temperature and relative humidity (RH).⁶ It is also recommended that vibration, electrostatic charges, and contamination of the filters from laboratory air be minimized to reduce variability in filter weight measurements. These controls have typically been maintained in small, environmentally controlled “cleanrooms.” As an alternative to constructing an elaborate cleanroom, we have designed, and presented in this paper, an inexpensive weighing chamber to maintain the necessary level of humidity control.     

Acute and chronic toxicity of organophosphate monocrotophos to Daphnia magna

The acute and chronic toxicity of monocrotophos (MCP), the binary joint toxicity of MCP and bifenthrin (BF), and sodium dodecyl benzene sulfonate (SDBS) to Daphnia magna (D. magna) was evaluated. The 24 h-median effective concentration (24 h-EC₅₀) and 48 h-median lethal concentration (48 h-LC₅₀) of MCP towards D. magna were 161 and 388 μ g/L, respectively. In addition, the lowest-observed effective concentration (LOEC) and non-observed effective concentration (NOEC) of MCP to D. magna were 10 and 5 μ g/L, respectively. Furthermore, the chronic value (ChV) of MCP against D. magna was 7 μ g/L and the acute chronic ratio (ACR) was 55. The number of offspring per female and the intrinsic rate of natural increase (r) were identified as the parameters that were most sensitive to MCP. In addition, toxic unit (TU) analysis was employed to evaluate the joint toxicities. The calculated TU_mix values of binary equitoxic mixtures of MCP + BF and MCP + SDBS were 1.47 and 1.63, respectively, which suggests that both equitoxic mixtures exert a limited antagonistic effect. The results of this study revealed that the toxic threshold of MCP towards D. magna is higher than its reported highest residue (4 μ g/L) in the ordinary aquatic environment, and that concurrent exposure to BF or SDBS may exert a slight antagonistic effect.     

Monoclonal antibody produced by heterologous indirect enzyme-linked immunosorbent assay and its application for parathion residue determination in agricultural and environmental samples

A heterologous indirect enzyme-linked immunosorbent assay (ELISA) was developed, which was based on monoclonal antibody (Mab) to determine parathion residue in agricultural and environmental samples. Eight Mabs were produced by introducing the heterologous indirect ELISA into the screening procedure. It was shown that these Mabs had more broad-reactivity with twenty competitors than that of 5H7 (Mab produced by homologous screening). So it became much easier using these new Mabs to develop heterologous immunoassays. In addition, all the developed heterologous ELISAs could be used to determine parathion residue in semiquantitative or quantitative level, and their detection limitation (LOD) was around 2 ng/mL. Compared with the previous heterologous ELISA (hapten 11/5H7) with IC₅₀ of 13.3 ng/mL, a better heterologous ELISA (hapten 11/1E1) was obtained with IC₅₀ of 3.8 ng/mL, which improved the sensitivity 3.5 times. Finally, the latter was applied to parathion residue determination in spiked agricultural and environmental samples without extraction or cleanup. The average recoveries of parathion added to water, soil, cucumber, Chinese cabbage and carrot were between 80.4 % and 111.8 %. The LOD for water and soil samples was 5 ng/mL, and the LOD for cucumber, rice and corn samples was 10 ng/mL.     

Enantioselectivity of racemic metolachlor and S-metolachlor in maize seedlings

Chiral herbicides may have enantioselective effects on plants. In this study, we assessed and compared the enantioselectivity of the chiral herbicides rac-metolachlor and S-metolachlor to maize seedlings. The superoxide dismutase activity (SOD) activity of roots and stem leaves treated by rac-metolachlor was 1.38 and 1.99 times that of roots and stem leaves treated by S-metolachlor. The peroxidase activity (POD) activity of roots and stem leaves was 1.48 and 2.79 times that of roots and stem leaves treated by S-metolachlor, respectively, while the catalase activity (CAT) activity was 4.77 and 8.37 times greater, respectively. The Hill reaction activity of leaves treated by rac-metolachlor were 1.45, 1.33, and 1.14 times those treated by S-metolachlor with treatments of 18.6, 37.2, and 74.4 μM. The differences observed between treatments of rac- and S-metolachlor were significant. Significant differences in maize seedling morphology were also observed between rac- and S-metolachlor treatments. The degradation rate of S-metolachlor in roots was greater than that of rac-metolachlor. The half-lives of rac- and S-metolachlor were 80.6 and 60.3 h at 18.6 μM; 119.5 and 90 h at 37.2 μM; and 169 and 164.8 h at 74.4 μM, respectively. Using the liquid chromatography-mass spectrometry method, hydroxymetolachlor, deschlorometolachlor and deschlorometolachlor propanol were considered to be possible metabolites. We determined the enantioselective toxicity of rac- and S-metolachlor to maize and speculated on the proposed metabolic pathway of metolachlor in maize roots. These results will help to develop an understanding of the proper application of rac- and S-metolachlor in crops, and give some information for environmental safety evaluation of rac- and S-metolachlor.     

Production of the monoclonal antibody against tylosin for immunoassay of macrolide antibiotics in milk

The objective of the present study was to develop an immunoassay for multi-determination of the residues of four macrolide antibiotics in milk. Tylosin was derivatized with 6-aminohexanoic acid to synthesize a hapten that was used to produce the monoclonal antibody. The obtained monoclonal antibody simultaneously recognized tylosin, acetylisovaleryltylosin, tilmicosin and desmycosin with crossreactivities of 100%, 91%, 49% and 76%, respectively. Then an indirect competitive immunoassay was developed to determine the four analytes in milk simultaneously. The limits of detection for the four analytes were in the range of 5.5–11.7 ng/mL depending on the compound. The recoveries of the four analytes from fortified blank milk were in the range of 78%–96% with coefficients of variation lower than 11.4%. The developed immunoassay could be used as a practical tool for rapid screening the residues of the four anlytes in milk.     

The characteristics of nitrate removal by the psychrotolerant denitrifying bacterium Acinetobacter johnonii DBP-3, isolated from a low-temperature eutrophic body of water

A psychrotolerant denitrifying bacterial strain, DBP-3, was isolated from a eutrophic body of water by low-temperature-oriented acclimation culture. Based on its morphologicalandbiochemicalcharacteristics and 16S rDNA gene sequence, the bacterium was identified as belonging to the genus Acinetobacter and closely related to A. johnonii. The satisfactory growth of DBP-3 was observed at 10–30°C and pH 7–9. Strain DBP-3 was able to utilize three types of carbon sources (sodium acetate > sodium citrate > glucose) to support growth and denitrification. DBP-3 grew faster, but with lower nitrate removal efficiency and higher nitrite accumulation, under aerobic conditions than under anoxic conditions. DBP-3 was extremely susceptible to tetracycline and rifampicine and less sensitive to ampicillin and penicillin. The growth of DBP-3 was significantly affected by Hg (II), Cr (VI), Pb (II), Cd (II), and As (III) at 0.32, 0.63, 1.25, 2.5, and 25.0 mg L^?1, respectively. Interestingly, chromium (VI) significantly promoted DBP-3 growth at concentrations lower than 0.32 mg L^?1. These data may be helpful to support the use of strain DBP-3 in the purification of eutrophic water bodies at low temperatures.     

Co-metabolic transformation of the neonicotinoid insecticide imidacloprid by the new soil isolate Pseudoxanthomonas indica CGMCC 6648

A new imidacloprid (IMI) degrading bacterium Z-9 (deposited number CGMCC 6648) was isolated and identified as Pseudoxanthomonas indica by 16S rRNA gene analysis. Two metabolites were identified as olefin and 5-hydroxy IMI by liquid chromatography-mass spectrometry and nuclear magnetic resonance analysis. P. indica CGMCC 6648 degraded 70.1% of IMI (1.22 mmol L^?1) and formed 0.93 mmol L^?1 5-hydroxy IMI and 0.05 mmol L^?1 olefin IMI in 6 days and in the presence of 100 mmol L^?1 glucose. The half-life of IMI degradation was 3.6 days. P. indica CGMCC 6648 transforms IMI via a co-metabolism mechanism and different carbohydrates have significant effects on 5-hydroxy IMI formation, whereas different organic acids have substantial effects on olefin IMI production. Lactose is the best co-substrate for IMI degradation and 5-hydroxy IMI formation with 0.77 mmol L^?1 degraded and 0.67 mmol L^?1 formed in 48 h, respectively. Pyruvate is the best co-substrate for olefin IMI formation with 0.17 mmol L^?1 produced in 96 h for all carbon sources tested. Pyruvate significantly stimulates the conversion of 5-hydroxy IMI to olefin IMI, whereas glucose slightly inhibits this reaction. P. indica CGMCC 6648 rapidly degrades IMI and forms olefin IMI, which may enhance its potential for biodegradation of IMI and increase its insecticidal activity, which can decrease the IMI dosage required.     

Concentrations and distributions of 18 organochlorine pesticides listed in the Stockholm Convention in surface sediments from the Liaohe River basin,China

Organochlorine pesticides (OCPs) were analyzed in 26 surface sediment samples from the Liaohe River basin, and the distributions of and potential environmental risks posed by OCPs in the basin were evaluated. Eighteen OCPs listed in the Stockholm Convention were determined using isotope-dilution gas chromatography–high resolution mass spectrometry. This is the first study of hexachlorobenzene (HCB) in the Liaohe River basin sediments. The total OCP concentrations were 0.39–68.06 ng g^?1 dry weight. The total α-, β-, γ-, and δ-hexachlorocyclohexane (HCH), the total dichlorodiphenyltrichloroethane (DDT – p,p′-dichlorodiphenyldichloroethane (DDD), p,p′-dichlorodiphenyldichloroethylene (DDE), o,p^'-DDT, and p,p′-DDT), and the HCB concentrations in the sediment samples were 0.1–28.48 ng g^?1 (mean 4.01 ng g^?1), 0.08–6.52 ng g^?1 (mean 3.07 ng g^?1), and 0.18–24.8 ng g^?1 (mean 4.38 ng g^?1), respectively. The HCB concentrations were higher than the concentrations of the other OCPs, and the HCHs and HCB together were the dominant OCPs. β-HCH was the most abundant HCH isomer. The concentrations of DDTs and other OCPs were relatively low, and the (DDE+DDD)/DDT ratios (>0.5) and DDD/DDE ratios (<1) indicated that no recent DDT inputs had occurred in the Liaohe River system. The main sources of HCHs were probably the historical production and agricultural use of HCH in the study area. The DDT and HCH concentrations were generally below or similar to the concentrations that have been found in other parts of the world. An ecotoxicological evaluation indicated that HCHs in surface sediments pose slight risks to human and ecological health in the Liaohe River basin.     

Gas-phase and semivolatile organic emissions from a modern nonroad diesel engine equipped with advanced aftertreatment

ABSTRACT

U.S. Tier 4 Final and Euro Stage IV and V regulations for nonroad compression-ignition engines have led to the development of exhaust aftertreatment technologies optimized for nonroad engines and duty cycles. In this study, several aftertreatment configurations consisting of state-of-the-art diesel oxidation catalysts (DOCs), diesel particulate filters (DPFs), copper (Cu) zeolite– and vanadium-based selective catalytic reduction (SCR) catalysts, and ammonia oxidation (AMOX) catalysts are evaluated using both nonroad transient (NRTC) and steady (8-mode NRSC) cycles in order to understand both component- and system-level effects of diesel aftertreatment on gas-phase, semivolatile, and particle-phase and particle-bound unregulated organic emissions. Organic emissions reported in this work include total hydrocarbon (THC), n-alkanes, branched alkanes, saturated cycloalkanes, aromatics, aldehydes, ketones, hopanes, steranes, and soluble organic fraction (SOF). Brake-specific emissions are reported for four configurations, including engine-out, DOC+CuZ-SCR+AMOX, V-SCR+AMOX, and DOC+DPF+CuZ-SCR+AMOX, and conversion of engine-out emissions is reported for the three aftertreatment configurations. Mechanisms responsible for the reduction of organic species are discussed in detail. This summary of emissions from a current nonroad diesel engine equipped with advanced aftertreatment can be used to more accurately model the impact of anthropogenic emissions on the atmosphere with tools such as the U.S. Environmental Protection Agency’s Motor Vehicle Emissions Simulator (MOVES2014a) model.

Implications: Anthropogenic emissions are a source of significant human health and environmental risk. This study, focused on the treatment of exhaust emissions from a modern nonroad diesel engine with a variety of aftertreatment configurations, examines the impact that human industrial activity can have on air pollution. In particular, we focus on the remediation of gas-phase and semivolatile organic emissions by emission reduction technologies. This detailed summary of emissions from a current nonroad diesel engine equipped with advanced aftertreatment can be used to more accurately model the impact of anthropogenic emissions on the atmosphere with tools such as the U.S. Environmental Protection Agency’s MOVES2014a model.