Effects of ceiling-mounted HEPA-UV air filters on airborne bacteria concentrations in an indoor therapy pool building

The purpose of this study was to assess the effectiveness of a new generation of high-volume, ceiling-mounted high-efficiency particulate air (HEPA)-ultraviolet (UV) air filters (HUVAFs) for their ability to remove or inactivate bacterial aerosol. In an environmentally controlled full-scale laboratory chamber (87 m3), and an indoor therapy pool building, the mitigation ability of air filters was assessed by comparing concentrations of total bacteria, culturable bacteria, and airborne endotoxin with and without the air filters operating under otherwise similar conditions. Controlled chamber tests with pure cultures of aerosolized Mycobacterium parafortuitum cells showed that the HUVAF unit tested provided an equivalent air-exchange rate of 11 hr(-1). Using this equivalent air-exchange rate as a design basis, three HUVAFs were installed in an indoor therapy pool building for bioaerosol mitigation, and their effectiveness was studied over a 2-year period. The HUVAFs reduced concentrations of culturable bacteria by 69 and 80% during monitoring periods executed in respective years. The HUVAFs reduced concentrations of total bacteria by 12 and 76% during the same monitoring period, respectively. Airborne endotoxin concentrations were not affected by the HUVAF operation.     

Variability of parameters measured during the resuspension of sediments with a particle entrainment simulator

The release of contaminants from sediments is an important problem facing environmental managers concerned with issues such as maintenance dredging, habitat restoration and dredge spoil placement. While there are laboratory methods to assess the remobilization of contaminants from resuspended sediments, little is known about how their operating characteristics influence a sediments response to resuspension. In this study, a particle entrainment simulator (PES) for resuspending sediments was evaluated by assessing variability among replicates and over operation time (12 h) for three estuarine sediments. These sediments varied in physical and chemical properties as well as the degree of metal contamination. Results showed that under identical resuspension conditions, there was low variability among sediment replicates. Sediment properties and the degree of metal contamination affected the magnitude and variation in water column parameters and contaminant release. Fine-grained sediments affected water column parameters, which stabilized over several hours of resuspension. While metal concentrations in the aqueous and particulate samples varied throughout operation, variation was highest for Cd and Ni. Compared to other methods used to evaluate the effects of sediment resuspension, the PES has operational advantages such as the ability to monitor water column conditions and resuspend sediment at specified energy levels. Overall, the PES provided reproducible conditions of resuspension effects among sediments varying in composition and contamination, demonstrating its value as a tool to evaluate contaminant mobility.     

Strength development of solidified/stabilized organic waste and optimum treatment design

Artificially contaminated (spiked) natural soils were solidified/stabilized using various combinations of commonly used additives, such as lime, cement, fly ash, activated carbon, and silica fume. The effectiveness of the solidification/stabilization (S/S) processes was evaluated based on experimental findings from compaction testing, unconfined compressive shear strength, and X-ray diffraction (XRD). Correlations of limited reliability between unconfined compressive strength and penetrometer and torvane measurements were derived. Results from XRD experiments indicated that certain organic contaminants (i.e., naphthalene and pyrene) might impact the S/S processes for a given combination of additives. The type and amount of organic contaminants also affected the pozzolanic reactions. Specifically, the absence or small peak intensity of pozzolanic product XRD patterns for a given combination of additives was a good indication that the type and the amount of organic contaminant present inhibited pozzolanic reactions. This phenomenon was tested and confirmed for actual field-contaminated samples.     

Analysis of colloid and tracer breakthrough curves

We consider the dispersion and elution of colloids and dissolved nonsorbing tracers within saturated heterogeneous porous media. Since flow path geometry in natural systems is often ill-characterized macroscopic (mean) flow rates and dispersion tensors are utilized in order to account for the sub-model scale microscopic fluctuations in media structure (and the consequent hydrodynamic profile). Even for tracer migration and dispersal this issue is far from settled.Here we consider how colloid and tracer migration phenomena can be treated consistently. Theoretical calculations for model flow geometries yield two quantitative predictions for the transport of free (not yet captured) colloids with reference to a non-sorbing dissolved tracer within the same medium: the average migration velocity of the free colloids is higher than that of the tracer; and that the ratio of the equivalent hydrodynamic dispersion rates of colloids and tracer is dependent only upon properties of the colloids and the porous medium, it is independent of pathlengths and fluid flux, once length scales are large enough.The first of these is well known, since even in simple flow paths free colloids must stay more centre stream. The second, if validated suggests how solute and colloid dispersion may be dealt with consistently in macroscopic migration models. This is crucial since dispersion is usually ill-characterized and unaddressed by the experimental literature. In this paper we present evidence based upon an existing Drigg field injection test for the validity of these predictions.We show that starting from experimental data the fitted dispersion rates of both colloids and non-sorbing tracers increase with the measured elution rates (obeying slightly different rules for tracers and colloids); and that the ratio of colloid and nonsorbing tracer elution rates, and the ratio of colloid and nonsorbing tracer dispersion rates may be dependent upon properties of the colloids and the medium (not the flow regime).It is important to realize that even for unretarded species, an earlier peak in the breakthrough curve does not necessarily correspond to a faster mean elution rate, or vice versa. But rather that a colloid may elute faster but disperse less than an equivalent tracer. Hence its peak may be retarded compared to that of the tracer, even assuming no retardation. Hence one must consider a combination of mean elution rate and mean dispersion rate, and not rely on “peak times” to corroborate chromatographic effects. The importance of this lies in the fact that these processes are not independent and yet upscale differently. Thus realistic estimates of effective colloid dispersion rates should be upscaled in a way consistent with that adopted for tracers within the same system.     

Open-path tunable diode laser absorption spectroscopy for acquisition of fugitive emission flux data

Air pollutant emission from unconfined sources is an increasingly important environmental issue. The U.S. Environmental Protection Agency (EPA) has developed a ground-based optical remote-sensing method that enables direct measurement of fugitive emission flux from large area sources. Open-path Fourier transform infrared spectroscopy (OP-FTIR) has been the primary technique for acquisition of pollutant concentration data used in this emission measurement method. For a number of environmentally important compounds, such as ammonia and methane, open-path tunable diode laser absorption spectroscopy (OP-TDLAS) is shown to be a viable alternative to Fourier transform spectroscopy for pollutant concentration measurements. Near-IR diode laser spectroscopy systems offer significant operational and cost advantages over Fourier transform instruments enabling more efficient implementation of the measurement strategy. This article reviews the EPA's fugitive emission measurement method and describes its multipath tunable diode laser instrument. Validation testing of the system is discussed. OP-TDLAS versus OP-FTIR correlation testing results for ammonia (R2 = 0.980) and methane (R2 = 0.991) are reported. Two example applications of tunable diode laser-based fugitive emission measurements are presented.     

Lake eutrophication at the urban fringe,Seattle region,USA

Nutrient pollution and associated eutrophication of freshwaters threaten the ecological integrity and the services provided to humans by lakes. We examined how human residential development influenced the level of lake eutrophication in the Seattle, WA, USA, region. We surveyed 30 lakes and measured 3 indicators of eutrophication: concentrations of chlorophyll-a and phosphorus, and the proportion of algae that are inedible to zooplankton. We classified lakes based on the waste-treatment method for shoreline homes: septic, sewer, and undeveloped lakes. Septic lakes occurred along the urban-rural fringe while sewer lakes occurred near urban centers. Septic lakes were more eutrophic than sewer lakes and undeveloped lakes, as indicated by higher levels of phosphorus and chlorophyll-a. These results suggest that septic systems contribute to the high levels of eutrophication in lakes at the urban-rural fringe. Lakes at the urban-rural fringe represent an opportunity for proactive management of urban expansion to minimize lake eutrophication.     

Soil functional responses to excess nitrogen inputs at global scale

There is little evidence that nitrogen (N) cycling in the highly weathered, low-phosphorus (P), acidic soils found in Southern Hemisphere continents will differ greatly from that in North America and Europe. Evidence from the 'south' shows: the similarity in forms and temporal patterns in losses of N from different land uses; that the C:N ratios of the forest floor/litter layer from different continents are strongly predictive of a range of processes on a global scale; that generalizations based on Northern Hemisphere experience of the impact of N additions to 'P-limited' ecosystems are likely to fail for southern ecosystems where anatomical and physiological adaptation of native plants to low-P soils makes questionable the concept of 'P-limitation'; that the greatest threats in the 'south' are probably changes in land use that may greatly increase N inputs and turnover; that localized increases in N inputs produce similar effects to those seen in the 'north'.     

Migration of saline solutions in variably saturated porous media

Migration of concentrated NaNO3 solutions in homogeneous packs of pre-wetted silica sands was investigated using a light transmission system. Solutions of 5 molal NaNO3 were found to migrate downward 24-62% faster than pure water, in an unstable, fingered manner. This behavior was attributed primarily to a surface tension induced, non-zero apparent contact angle between the imbibing and the resident fluids. For saline solutions of similar surface tension to that of pure water (achieved by the addition of 2% methanol), the migration rates and plume shapes were comparable to that of water, demonstrating that density was not the primary source of the observed differences in migration patterns. At depths where resident saturation increased above residual, the migration process appeared to occur via film flow with slight changes in saturation (<4%), rather than in a series of abrupt jumps, as observed at shallower depths. A method for contact angle scaling was used to illustrate the effects of non-zero contact angles on capillary pressure-saturation curves.