Biochemical characterization of a multiple heavy metal, pesticides and phenol resistant Pseudomonas fluorescens strain

Pseudomonas fluorescens SM1 isolate was found to be resistant to some major water pollutants namely Cd2+, Cr6+, Cu2+, Ni2+, Pb2+, BHC, 2,4-D, mancozeb and phenols up to a concentration four times to the normal levels occurring in the highly pollulated regions. Curing experiment brought about the loss of one or more resistance markers indicating the plasmid born resistance. Plasmid profile of SM1 strain showed the presence of one DNA band of 43.6 kb. This Plasmid was isolated from SM1 strain and introduced into Escherichia coli DH5 alpha with a transformation frequency of 6.7 x 10(-4)transformants/recipient cell. The test SM1 strain was also capable of biotransforming Cr(VI) to Cr(III) which is less toxic compounds. Present studies further indicated that the test SM1 strain was not only resistant to 2,4-D, phenols and catechol but also capable of bioremediating these toxicants quite efficiently. Moreover, studies with inhibitors like sodium azide, 2,4-DNP and chloramphenicol suggested that the major mechanism for the bioremediation of the heavy metals other than Cr6+ would be the biosorption process.     

Waste management strategies for concrete

Recycling and reuse of waste such as building rubble, concrete lumps, etc. generated at construction and demolition sites form part of a wider, complex issue, primarily relating to improving supplies of construction material and solving problems of disposal of waste construction material. Within the framework of the sustainable development of the environment, the use of waste materials with minimum environmental impact has received much attention. The conversion of a large amount of demolished waste into an alternative resource will conserve the depleting natural resources of building materials. Demolished waste is mainly used as a non-stabilized base or sub-base in highway construction. The present paper discusses the recycling process and makes an effort to assess a safe and economic use of recycled concrete as a structural grade material for the construction industry. Extensive tests of structural properties such as compressive strength, flexural strength and split tensile strength of recycled concrete were carried out, in which cement and similarly fine aggregate were partially replaced by demolished waste to obtain recycled concrete and recycled aggregate concrete whose properties were compared with results for the conventional concrete.     

Wind speed pattern data and wind energy potential in Pakistan: current status,challenging platforms and innovative prospects

Environmental Science and Pollution Research - Energy is an essential parameter for the economic growth and sustainable development of any country. Due to the rapid increase in energy demand,...     

Seasonal Variation in Bacterial Flora of the Wastewater and Soil in the Vicinity of Industrial Area

Environmental pollution is one of the major problems being facedtoday due to the advent of extensive industrialization. Heavy metals are the most important contaminants in wastewater that are present in abundance and are toxic. Heavy metal contentsof sewage in the industrial estate of Aligarh (U.P.) have beendetermined by atomic absorption spectrophotometry. The analysisof samples collected from six different locations revealedsignificantly high levels of Fe, Zn, Cu, Cr and Ni. Certainbacteriological (Total bacterial count, Total coliform, Fecal coliform, and Fecal Streptococci) parameters of domestic and industrial sewage as well as soils were monitored from March1990 to January 1993. Total bacterial count, total coliform,fecal coliform and fecal streptococci were found to be lowestin all the samples of industrial wastewater compared to thosein domestic sewage and soil systems. The soil however, contained highest total culturable bacterial population. In view of the common practice of the application of sewage to agricultural land in the neighbouring area, the discharge ofindustrial wastewater without proper treatment into public sewers should be strictly prohibited.     

Biomechanical pulping: a mill-scale evaluation

Mechanical pulping process is electrical energy intensive and results in low paper strength. Biomechanical pulping, defined as the fungal treatment of lignocellulosic materials prior to mechanical pulping, has shown at least 30% savings in electrical energy consumption, and significant improvements in paper strength properties compared to the control at a laboratory scale. In an effort to scale-up biomechanical pulping to an industrial level, 50 tons of spruce wood chips were inoculated with the best biopulping fungus in a continuous operation and stored in the form of an outdoor chip pile for 2 weeks. The pile was ventilated with conditioned air to maintain the optimum growth temperature and moisture throughout the pile. The control and fungus-treated chips were refined through a thermomechanical pulp mill (TMP) producing lightweight coated paper. The fungal pretreatment saved 33% electrical energy and improved paper strength properties significantly compared to the control. Since biofibers were stronger than the conventional TMP fibers, we were able to reduce the amount of bleached softwood kraft pulp by at least 5% in the final product. Fungal pretreatment reduced brightness, but brightness was restored to the level of bleached control with 60% more hydrogen peroxide. The economics of biomechanical pulping look attractive.     

Nitrogen and plant population change radiation capture and utilization capacity of sunflower in semi-arid environment

The combination of nitrogen and plant population expresses the spatial distribution of crop plants. The spatial distribution influences canopy structure and development, radiation capture, accumulated intercepted radiation (Sa), radiation use efficiency (RUE), and subsequently dry matter production. We hypothesized that the sunflower crop at higher plant populations and nitrogen (N) rates would achieve early canopy cover, capture more radiant energy, utilize radiation energy more efficiently, and ultimately increase economic yield. To investigate the above hypothesis, we examined the influences of leaf area index (LAI) at different plant populations (83,333, 66,666, and 55,555 plants ha^?1) and N rates (90, 120, and 150 kg ha^?1) on radiation interception (Fi), photosynthetically active radiation (PAR) accumulation (Sa), total dry matter (TDM), achene yield (AY), and RUE of sunflower. The experimental work was conducted during 2012 and 2013 on sandy loam soil in Punjab, Pakistan. The sunflower crop captured more than 96% of incident radiant energy (mean of all treatments), 98% with a higher plant population (83,333 plants ha^?1), and 97% with higher N application (150 kg ha^?1) at the fifth harvest (60 days after sowing) during both study years. The plant population of 83,333 plants ha^?1 with 150 kg N ha^?1 ominously promoted crop, RUE, and finally productivity of sunflower (AY and TDM). Sunflower canopy (LAI) showed a very close and strong association with Fi (R ² = 0.99 in both years), PAR (R ² = 0.74 and 0.79 in 2012 and 2013, respectively), TDM (R ² = 0.97 in 2012 and 0.91 in 2013), AY (R ² = 0.95 in both years), RUE for TDM (RUE_TDM) (R ² = 0.63 and 0.71 in 2012 and 2013, respectively), and RUE for AY (RUE_AY) (R ² = 0.88 and 0.87 in 2012 and 2013, respectively). Similarly, AY (R ² = 0.73 in 2012 and 0.79 in 2013) and TDM (R ² = 0.75 in 2012 and 0.84 in 2013) indicated significant dependence on PAR accumulation of sunflower. High temperature during the flowering stage in 2013 shortened the crop maturity duration, which reduced the LAI, leaf area duration (LAD), crop growth rate (CGR), TDM, AY, Fi, Sa, and RUE of sunflower. Our results clearly revealed that RUE was enhanced as plant population and N application rates were increased and biomass assimilation in semi-arid environments varied with radiation capture capacity of sunflower.     

Thermal,Rheological, Mechanical and Morphological Behavior of High Density Polyethylene and Carboxymethyl Cellulose Blend

In this study water soluble sodium carboxymethyl cellulose (CMC) was blended with high density polyethylene (HDPE) by peroxide-initiated melt compounding technique. The compatibility of the blended polymers were carried out by silane crosslinking agent. A series of blends were prepared by varying the CMC contents up to a maximum of 50 phr. The physical properties of non-crosslinked and crosslinked blends were investigated in detail. FTIR analysis of crosslinked blend confirmed the presence of Si–O–Si and Si–O–C absorption peaks at 1050 and 1159 cm^?1. Thermal stability of crosslinked blends improved as compared to its non-crosslinked congener. Rheological study of crosslinked blends illustrated high complex viscosity and dynamic shear storage modulus. The tensile strength of virgin polyethylene was 8.1 MPa whereas the maximum tensile strength of 19.6 MPa was observed in crosslinked blend. Similarly lower deformation was observed in crosslinked blends under static load. Scanning electron microscopy of crosslinked formulations also showed strong adhesion between the polymers interface. The compatibility of HDPE and CMC is attributed to both free radical and condensation reactions.     

Toxicological effects of major environmental pollutants: an overview

The last quarter of the twentieth century had witnessed a global surge in awakening against the unabated menace of environmental pollution. Among the various types of environmental pollution, water pollution is an age-old problem but it has gained an alarming dimension lately because of the problems of population increase, sewage disposal, industrial waste, radioactive waste, etc. Present scenario of water pollution calls for immediate attention towards the remediation and detoxification of these hazardous agents in order to have a healthy living environment. The present communication will deal with the toxicological effects of major environmental pollutants, viz. heavy metals, pesticides, and phenols.     

Cytochrome P450 system as potential biomarkers of certain toxicants: comparison between plant and animal models

In present study, we measured the activities of some selected cytochrome P450 isozymes like ethoxyresorufin-o-deethylase (EROD), pentoxyresorufin-o-deethylase (PROD), and N-nitrosodimethylamine demethylase (NDMA-d) treating experimental rats with different environmental toxicants, namely trichloroethylene (TCE), heavy metal mixture, and ethyl alcohol individually or in combination and by exposing the Allium cepa bulbs to increasing concentration of TCE for 48 h. In animal system, NDMA-d activity displayed a remarkable amplification by 4.2-fold in the liver of alcohol ingested rats compared with control animals. TCE intake also resulted in a marked increase of around 3.8-fold and 1.2-fold in rats’ NDMA-d activity in the liver and kidney, respectively. In onion bulbs, an amazing rise in the activity of test enzymes was recorded in a dose-dependent manner. Among the said enzymes, PROD showed maximum increase up to the extent of 22-fold in comparison with control at 20 ppm of TCE exposure, whereas NDMA-d and EROD showed 11- and 9-fold increase in enzymatic activity, respectively, compared with the control. Based on this study, we conclude and advocate that all the selected isozymes of CYP450 system, viz. PROD, NDMA-d, and EROD can act as potent biomarkers in plant system for assessing the TCE pollution.     

Microelectrophoretic study of environmentally induced DNA damage in fish and its use for early toxicity screening of freshwater bodies

This study investigates the potential of the comet and micronucleus assays of fish DNA as a means of screening the toxicity of aquatic environments. Catla catla and Cirrhinus mrigala collected from the River Chenab in Pakistan were used as a case study for the application of comet and micronucleus techniques. Comet and micronucleus assays were used to compare DNA damage in C. catla and C. mrigala collected from polluted areas of the River Chenab and farmed fish. Atomic absorption spectrophotometry showed an acute level of toxicity from Cd, Cu, Mn, Zn, Pb, Cr, Sn, and Hg in river water. Comet assay showed significant (p < 0.05) DNA damage in C. catla representing 17.33 ± 2.42, 11.53 ± 2.14, and 14.17% DNA in the comet tail, averaged from three sites of the polluted area of the river. Tail moment was observed as 10.06 ± 2.71, 3.11 ± 0.74, and 14.70 ± 1.89, while olive moment was 8.85 ± 1.84, 3.83 ± 0.76, and 7.11 ± 0.73, respectively. Highly significant (p < 0.01) damage was reported in C. mrigala as 37.29 ± 2.51, 34.96 ± 2.53, and 38.80 ± 2.42% DNA in comet tail, tail moment was 23.48 ± 3.90, 19.78 ± 4.26, and 14.30 ± 1.82, and olive moment was 16.22 ± 2.04, 13.83 ± 1.96, and10.99 ± 0.90. Significant (p < 0.05) differences were observed in genotoxicity between farmed and polluted area fish. Micronucleus assay showed a similar picture of significant difference in respect to single and double micronucleus induction: i.e., 23.20 ± 4.19 and 2.80 ± 1.07‰ in C. catla and 44.80 ± 3.73 and 06.20 ± 0.97‰, respectively, in C. mrigala. Nuclear abnormalities were found as 6.00 ± 0.84 and 09.60 ± 1.72/thousand cells, respectively, in both species. The results of this study suggest that these novel fish DNA damage assays can be used as an expedient toxicity screening for aquatic environments.