蛋白质对PVDF超滤膜污染行为的界面微观作用力解析

采用原子力显微镜,结合自制微颗粒探针,对膜-污染物及污染物-污染物间微观作用力进行了检测分析,考察了不同p H条件下牛血清蛋白(BSA)在不同界面特性PVDF超滤膜上的膜污染行为.结果表明,在膜过滤初期,通量剧烈衰减主要由BSA和膜之间黏附力作用导致,在膜过滤后期,BSA与BSA之间的黏聚作用则是影响后期膜污染行为的主要因素;PA膜-BSA和PP膜-BSA之间的黏附作用力均大于BSA-BSA之间的黏聚作用力,说明在整个膜过滤过程中,BSA与PVDF超滤膜之间的黏附作用对膜污染起主导作用;相同p H条件下,PA膜-BSA之间的微观作用小于PP膜-BSA之间的相互作用力,说明亲水性较强的PA膜具有较强的抗污染性;而PA膜和PP膜过滤后期BSA-BSA之间黏聚力相差不大,也进一步说明膜过滤过程中膜-污染物之间的微观作用力是影响膜污染行为的主要因素.     

艾比湖区域景观格局与河流水质关系探讨

为进一步明确景观格局对河流水质的影响.本研究选择新疆艾比湖区域为研究对象,以28个水质采样点为中心,建立100、200、300、400 m的河流缓冲区,并提取土地利用/覆被-景观格局数据.首先,通过主成分分析获得水环境的主要水质变量.其次,利用多元线性回归探讨研究区不同宽度缓冲区土地利用/覆被-景观格局变化对河流水质的影响,获得水质管理的有效缓冲区.结果表明：①2015年5月,在艾比湖区域测得的18个地表水水质指标中提取TDS、SO₄^2-、NH₄⁺-N、HCO₃^-、Na⁺和TP这6个水质指标.②对斑块密度（PD）、最大斑块指数（LPI）、边缘密度（ED）、景观形状指数（LSI）、蔓延度指数（CONTAG）进行统计分析,发现人类活动在4个缓冲区内强弱不均.③本文在不同尺度的缓冲区下,将PD、LPI、ED、LSI、CONTAG和TDS、SO₄^2-、NH₄⁺-N、HCO₃^-、Na⁺、TP分别进行相关性分析,发现300m缓冲区相关性最为显著.④在300m缓冲区内,通过多元线性回归分析,将TDS、HCO₃^-与其各自对应的景观指数的关系进行定量化表达,进一步探明区域流域地表水与周围一定缓冲区范围内的景观格局的内在关系.     

辽东湾西北部海域表层沉积物重金属含量的空间分布特征与污染状况评价

对2013年秋季和2014年春季两季辽东湾西北部海域共26个采样站位7种重金属含量的分布特征进行了研究。结果表明:该海域表层沉积物中Hg、Zn和Cd含量的平均值均高于渤海工业化前沉积物重金属背景值。单因子污染指数和重金属地质累积指数评价结果显示,Cd属于"轻度"污染,Hg、Cu、Pb、Zn、As和Cr属于无污染程度。重金属潜在生态风险评价结果表明,研究区的综合潜在生态风险"较低"。单金属潜在危害系数程度较高的是Cd、Hg。表层沉积物中重金属和TOC相关性分析表明:TOC含量与重金属Hg、Cu、Cd、Cr和As含量具有一定的正相关性。进一步通过主成分分析表明该海域沉积物重金属有3个来源,即有机质降解;工业废水、城市排污及养殖自身污染;岩石的自然风化和侵蚀过程。本研究结果揭示了辽东湾西北部海域沉积物中重金属的分布特征,初步推断了重金属污染来源,可为辽东湾海洋生态环境保护、修复提供依据。     

微塑料的环境影响行为及其在我国的分布状况

微塑料是一种存在于不同环境介质中的新兴污染物,因其分布范围广、潜在环境危害大,近年来逐渐引起人们的广泛关注.主要分析了微塑料的环境影响行为及机制,以及微塑料在我国污水处理厂、土壤、地表水和海洋等环境介质中的分布特征及影响因素.结果表明,微塑料可通过物理、化学、载体等多重作用危害生态环境健康,甚至微塑料会随着食物链由低营养级向高营养级传递,对人类食品安全造成潜在威胁.我国污水处理系统、土壤及不同水体环境（河流、湖泊、海洋及饮用水等）均受到不同程度的微塑料污染,并且其污染水平总体高于国外,这可能与我国较大的人口密度相关.进一步分析发现,我国环境中微塑料的分布呈现一定的地域差异性,其分布特征不仅与人类活动、地区经济、工业结构与发展水平等因素密切相关,同时污水处理厂的处理处置工艺、环境容量也会影响环境中微塑料的污染水平.针对我国微塑料污染研究现状,建议后续从微塑料的生物毒性效应、时空分布特征及其在环境介质中的迁移转化规律等方面进一步深入研究,以便更加全面地了解我国微塑料污染现状及其潜在的环境生态风险,并为微塑料的污染防控提供指导.      

氮负荷升高对螺-附着藻-苦草生态关系的影响

本文设计了双因子(氮负荷升高、有无螺类)受控实验,研究了氮负荷升高(太湖正常氮负荷的3倍)对螺-附着藻-苦草关系的影响.结果表明,氮负荷升高处理明显提高了水体总氮、总溶解氮、叶绿素a等指标的含量,显著增加了附着生物干重,进而抑制了苦草生长;与正常氮负荷处理组相比,3倍氮负荷处理组中苦草的相对生长率、株高和叶片数分别降低了33%、25%和13%.环棱螺降低了附着生物干重和水体叶绿素a含量,明显促进了苦草生长.氮负荷升高和环棱螺存在对水体各项理化指标、附着生物干重和苦草的各项生长指标均无交互作用.此外,氮负荷升高还降低了环棱螺的生长速率.分析认为,氮负荷升高对沉水植物生长的抑制机理主要体现在浮游藻类与附着生物生物量增加的抑制效应;环棱螺的存在虽然在一定程度上减弱了这种效应,但由于氮负荷升高还同时使环棱螺生长率降低,削弱了其对附着生物的牧食压力,从而使得附着生物对苦草生长的抑制作用加强.因此,氮负荷升高使螺-附着藻-沉水植物之间的生态关系失衡,也可能是氮浓度较高的富营养湖泊中沉水植被稀少的重要原因.     

Numerical study of the effects of Planetary Boundary Layer structure on the pollutant dispersion within built-up areas

The effects of different Planetary Boundary Layer(PBL) structures on pollutant dispersion processes within two idealized street canyon configurations and a realistic urban area were numerically examined by a Computational Fluid Dynamics(CFD) model. The boundary conditions of different PBL structures/conditions were provided by simulations of the Weather Researching and Forecasting model. The simulated results of the idealized 2D and 3D street canyon experiments showed that the increment of PBL instability favored the downward transport of momentum from the upper flow above the roof to the pedestrian level within the street canyon. As a result, the flow and turbulent fields within the street canyon under the more unstable PBL condition are stronger. Therefore, more pollutants within the street canyon would be removed by the stronger advection and turbulent diffusion processes under the unstable PBL condition. On the contrary, more pollutants would be concentrated in the street canyon under the stable PBL condition. In addition, the simulations of the realistic building cluster experiments showed that the density of buildings was a crucial factor determining the dynamic effects of the PBL structure on the flow patterns. The momentum field within a denser building configuration was mostly transported from the upper flow, and was more sensitive to the PBL structures than that of the sparser building configuration. Finally, it was recommended to use the Mellor–Yamada–Nakanishi–Niino(MYNN) PBL scheme, which can explicitly output the needed turbulent variables, to provide the boundary conditions to the CFD simulation.     

Numerical study of the effects of local atmospheric circulations on a pollution event over Beijing-Tianjin-Hebei, China

Currently, the Chinese central government is considering plans to build a trilateral economic sphere in the Bohai Bay area, including Beijing, Tianjin and Hebei(BTH), where haze pollution frequently occurs. To achieve sustainable development, it is necessary to understand the physical mechanism of the haze pollution there. Therefore, the pollutant transport mechanisms of a haze event over the BTH region from 23 to 24 September 2011 were studied using the Weather Research and Forecasting model and the FLEXible-PARTicle dispersion model to understand the effects of the local atmospheric circulations and atmospheric boundary layer structure. Results suggested that the penetration by sea-breeze could strengthen the vertical dispersion by lifting up the planetary boundary layer height(PBLH) and carry the local pollutants to the downstream areas; in the early night, two elevated pollution layers(EPLs) may be generated over the mountain areas: the pollutants in the upper EPL at the altitude of 2–2.5 km were favored to disperse by long-range transport, while the lower EPL at the altitude of 1 km may serve as a reservoir, and the pollutants there could be transported downward and contribute to the surface air pollution.The intensity of the sea–land and mountain–valley breeze circulations played an important role in the vertical transport and distribution of pollutants. It was also found that the diurnal evolution of the PBLH is important for the vertical dispersion of the pollutants,which is strongly affected by the local atmospheric circulations and the distribution of urban areas.     

Application of internal standard method in recombinant luminescent bacteria test

Mercury and its organic compounds have been of severe concern worldwide due to their damage to the ecosystem and human health. The development of effective and affordable technology to monitor and signal the presence of bioavailable mercury is an urgent need. The Mer gene is a mercury-responsive resistant gene, and a mercury-sensing recombinant luminescent bacterium using the Mer gene was constructed in this study. The mer operon from marine Pseudomonas putida strain SP1 was amplified and fused with prompterless luxCDABE in the pUCD615 plasmid within Escherichia coli cells, resulting in pTHE30–E. coli. The recombinant strain showed high sensitivity and specificity. The detection limit of Hg^2 + was 5 nmol/L, and distinct luminescence could be detected in 30 min. Cd^2 +, Cu^2 +, Zn^2 +, Ca^2 +, Pb^2 +, Mg^2 +, Mn^2 +, and Al^3 + did not interfere with the detection over a range of 10^− 5–1 mM. Application of recombinant luminescent bacteria testing in environmental samples has been a controversial issue: especially for metal-sensing recombinant strains, false negatives caused by high cytotoxicity are one of the most important issues when applying recombinant luminescent bacteria in biomonitoring of heavy metals. In this study, by establishing an internal standard approach, the false negative problem was overcome; furthermore, the method can also help to estimate the suspected mercury concentration, which ensures high detection sensitivity of bioavailable Hg^2 +.     

新标准下天津市大气环境监测预警体系的构建

通过对天津大气环境监测现状进行客观分析,并结合天津市整体发展规划、经济与环境发展的新需求,提出了构建天津大气环境监测预警体系的基本框架,将逐步以"三个说清"为目标,全面提升天津大气环境监测综合能力和水平,最终建立了天津大气环境监测预警体系。该研究完善了天津市PM2.5监测及预警能力,能够实现对主要污染源的实时监控,弥补了现有预报预警能力不足的情况,使我市环境空气质量预报更为科学准确,环境空气质量预警信息发布更为及时,能大幅提高天津市对重污染天气的应对能力。     

基于PMF模型的县域尺度土壤重金属来源分析及风险评价

为探究小尺度空间区域土壤重金属的污染特征、风险和来源,以广东省揭阳市榕城区为例,运用富集系数、污染负荷指数、生态风险评价模型、健康风险评价模型进行风险评价,结合相关性分析、空间分析和正定矩阵因子分解（PMF）模型进行来源解析.结果表明,土壤中ω（Cr）、ω（Hg）、ω（As）、ω（Pb）、ω（Ni）、ω（Cd）、ω（Cu）和ω（Zn）的均值分别为54.87、0.25、8.35、56.00、15.38、0.35、30.56和124.23 mg ·kg^-1,均超过广东省土壤背景值;Cr、As、Pb和Ni无富集,Zn和Cu轻微富集,Hg和Cd中等富集;污染负荷指数的均值为2.37,总体上属于重度污染水平,8种元素处于不同的污染水平.研究区土壤重金属整体处于重度生态风险,其中Hg和Cd属于强烈生态风险,其他元素属于轻微生态风险.不同元素在3种暴露途径下产生的非致癌风险处于可接受范围;成人和儿童的致癌风险分别为9.81E-05和5.59E-04,Cr和As是致癌风险的主要贡献者,需重点关注.研究区土壤重金属共有4种主要来源：交通来源（37.02%）、成土母质来源（18.53%）、大气沉降来源（26.49%）和工业来源（17.96%）.