Ash and deposit formation from oxy-coal combustion in a 100 kW test furnace

Ash deposition is still an unresolved problem when retrofitting existing air-fired coal power plants to oxy-fuel combustion. Experimental data are quite necessary for mechanism validation and model development. This work was designed to obtain laboratory combustor data on ash and deposits from oxy-coal combustion, and to explore the effects of oxy-firing on their formation. Two bituminous coals (Utah coal and Illinois coal) and one sub-bituminous coal (PRB coal) were burned on a down-fired combustor under both oxy- and air-firing. Two oxy-fired cases, i.e., 27 vol% O₂/73 vol% CO₂ and 32 vol% O₂/68 vol% CO₂, were selected to match the radiation flux and the adiabatic flame temperature of air combustion, respectively. Once-through CO₂ was used to simulate fully cleaned recycled flue gas. The flue gas excess oxygen was fixed at 3 vol%. For each case, both size-segregated fly ash and bulk fly ash samples were obtained. Simultaneously, ash deposits were collected on an especially designed un-cooled deposition probe. Ash particle size distributions and chemical composition of all samples were characterized. Data showed that oxy-firing had insignificant impacts on the tri-modal ash particle size distributions and composition size distributions in the size range studied. Bulk ash compositions also showed no significant differences between oxy- and air-firing, except for slightly higher sulfur contents in some oxy-fired ashes. The oxy-fired deposits were thicker than those from air-firing, suggesting enhanced ash deposition rates in oxy-firing. Oxy-firing also had apparent impacts on the deposit composition, especially for those components (e.g., CaO, Fe₂O₃, SO₃, etc.) that could contribute significantly to ash deposition. Based on these results, aerodynamic changes in gas flow and changes in combustion temperature seemed more important than chemical changes of ash particles in determining deposit behavior during oxy-coal combustion.     

Can we measure carrying capacity with foraging behavior?

Carrying capacity is one of the most important, yet least understood and rarely estimated, parameters in population management and modeling. A simple behavioral metric of carrying capacity would advance theory, conservation, and management of biological populations. Such a metric should be possible because behavior is finely attuned to variation in environment including population density. We connect optimal foraging theory with population dynamics and life history to develop a simple model that predicts this sort of adaptive density-dependent change in food consumption. We then confirm the model's unexpected and manifold predictions with field experiments. The theory predicts reproductive thresholds that alter the marginal value of energy as well as the value of time. Both effects cause a pronounced discontinuity in quitting-harvest rate that we revealed with foraging experiments. Red-backed voles maintained across a range of high densities foraged at a lower density-dependent rate than the same animals exposed to low-density treatments. The change in harvest rate is diagnostic of populations that exceed their carrying capacity. Ecologists, conservation biologists, and wildlife managers may thus be able to use simple and efficient foraging experiments to estimate carrying capacity and habitat quality.     

Mating success and fidelity to territories in a fallow deer lek: a female removal experiment

A lek is a clump of male territories that females visit only for mating; it is quite a rare mating system among mammals. As we wanted to investigate the role of past male mating success on their fidelity to lek territories, we displaced fallow deer females by a lek (Lek A), i.e. we removed the resources for rutting males. They moved to a new area followed by some of the territorial males (mobile males) where they established a new lek (Lek B). Other males (faithful males) stayed on Lek A. The former had lower mating success and dominance ranking in the early, undisturbed part of the rut. After disturbance, the MS of faithful males was much reduced, while that of mobile males was higher on Lek B than it had been on Lek A. We then disturbed Lek B. Females returned to Lek A, and the mating success of faithful males reverted to its original level. Past mating success was the main factor predicting whether a male was faithful or mobile. We illustrated for the first time the importance of past experience in promoting lek fidelity; this experiment gives an insight into the mechanisms leading to the traditional use of leks.     

Ion mobility based on column leaching of South African gold tailings dam with chemometric evaluation

New column leaching experiments were designed and used as an alternative rapid screening approach to element mobility assessment. In these experiments, field-moist material was treated with an extracting solution to assess the effects of acidification on element mobility in mine tailings. The main advantage of this version of column leaching experiments with partitioned segments is that they give quick information on current element mobility in conditions closely simulating field conditions to compare with common unrepresentative air-dried, sieved samples used for column leaching experiments. Layers from the tailings dump material were sampled and packed into columns. The design of columns allows extracting leachates from each layer. The extracting solutions used were natural (pH 6.8) and acidified (pH 4.2) rainwater. Metals and anions were determined in the leachates. The concentrations of metals (Ca, Mg, Fe, Mn, Al, Cr, Ni, Co, Zn, and Cu) in sample leachates were determined using ICP OES. The most important anions (NO3-, Cl-, and SO4(2)-) were determined using the closed system izotacophoresis ITP analyser. The chemical analytical data from tailings leaching and physico-chemical data from field measurements (including pH, conductivity, redox potential, temperature) were used for chemometric evaluation of element mobility. Principal factor analysis (PFA) was used to evaluate ions mobility from different layers of tailings dump arising from varied pH and redox conditions. It was found that the results from the partitioned column leaching illustrate much better complex processes of metals mobility from tailings dump than the total column. The chemometric data analysis (PFA) proofed the differences in the various layers leachability that are arising from physico-chemical processes due to chemical composition of tailings dump deposit.     

Studies on the lipid metabolism of some oceanic crustaceans

Mid-water, oceanic crustaceans were either fed food labelled with (¹⁴C) palmitic acid under controlled conditions, or injected directly with (¹⁴C) palmitic acid. Lipid classes and their constituent fatty acids and fatty alcohols were subsequently separated and assayed for radioactivity. Significant levels of radioactivity were present in the 16:0¹ alcohols and 18:1 acids of wax esters, and in the 16:0/16:1, 18:0/18:1, 20:5 and 22:6 acids of both triglycerides and phospholipids. It was concluded that these crustaceans were capable of biosynthesis of wax esters and higher polyunsaturated fatty acids.     

Polynuclear Aromatic Hydrocarbons In Urban Atmospheres in Ontario

A comprehensive program comprising the collection of particulate samples at some 20 sampling sites throughout the Province of Ontario afforded seasonal or monthly composites of airborne particulates which were extracted for determinations of polynuclear hydrocarbons. Results indicated that concentrations of airborne carcinogens or potential carcinogens in urban air throughout Ontario are much lower than values reported in the literature for urban atmospheres in England. The project served as a test of the practicability of methods recommended for extractive, chromatographic, and spectroscopic aspects of a complex routine, and the experience gained should be useful as a guide in the ultimate establishment of standardized methods. The work has identified areas in the province where more detailed sampling would be useful, and has indicated analytical problems requiring investigation.     

Rollback Modeling: Basic and Modified

The rollback or proportional model is widely used in pollution control calculations and included in the guidelines for preparing and evaluating state implementation plans. Its basis and limitations are not widely known or understood. In this paper, the basis and limitations of rollback are listed and discussed, and extensions of basic rollback are proposed.