A Methodological Approach for Designating Management Zones in Mount Spil National Park, Turkey

/ This study was undertaken to (1) determine the suitability of ecosystems within Mount Spil National Park (Turkey) to human activities by a systematic zoning procedure, and (2) provide the basis for developing sound management strategies based on natural-cultural resource attributes of the park. After assessing natural-cultural resources and human activity requirements, the suitability of three zones (Strict Protection Zone, SPZ; Restricted Use Zone, RUZ; and Recreation and Administration Zone, RAZ) for proposed human activities/land uses was determined in order to maintain ecological sustainability and integrity through a weighting-ranking methodology, based on a grid cell resolution of 1 km x 1 km. Results showed that out of the three management zones, the RUZ in which the recreational activities that do not require physical developments are allowed constituted 82% of the park area as the first priority management zone. The proposed zoning procedure is believed to be a key step to improve management for both the study area and other national parks with the similar landscape features.     

Thermal Degradation Mechanism of Low-Density Polyethylene Plastic Wastes in Cyclohexane

The thermal LDPE degradation mechanism harnessing a high-pressure autoclave surrounded by a furnace was investigated in this work. Rates of formation of gas, liquid, and solid during degradation of PE plastic wastes in cyclohexane as solvent at 400 and 425°C have been experimentally determined. Four reaction mechanisms have been proposed and tested to estimates of gas, liquid, and solid. Proposed mechanisms are based on the assumption that the reactions are pseudo-first-order with respect to the reacting species. Pseudo-first-order rate constants for each of the indicated mechanistic steps have been calculated by nonlinear regression analysis. The best fit was obtained by model 2 (pure parallel reaction mechanism), and its activation energy was determined.     

Heavy Metal Pollution of Surface Soil in the Thrace Region, Turkey

Abstact Samples of surface soil were collected at 73 sites in the Thrace region, northwest part of Turkey. Two complementary analytical techniques, epithermal neutron activation analysis (ENAA) and atomic absorption spectrometry (AAS) with flame and graphite furnace atomization were used to determine 35 elements in the soil samples. Concentrations of As, Cd, Co, Cu, Mn, Ni, Pb and Zn were determined using AAS and GF AAS, and ENAA was used for the remaining 27 elements. Results for As, Ba, Br, Ca, Cd, Ce, Co, Cr, Cs, Cu Eu, Fe, Hf, I, In, K, La, Mn, Mo, Na, Nd, Ni, Pb, Rb, Sb, Sc, Sm, Sr, Ta, Tb, Th, Ti, U, V and Zn are reported for the first time for soils from this region. The results show that concentrations of most elements were little affected by the industrial and other anthropogenic activities performed in region. Except for distinctly higher levels of Pb, Cu, Cd and Zn in Istanbul district than the median values for the Thrace region, the observed distributions seem to be mainly associated with lithogenic variations. Spatial distributions of As, Cd, Cr, Cu, Ni, Pb and Zn were plotted in relation to the concentration values in soil using Geographic Information System (GIS) technology     

Novel Glycopolymers Based on d-Mannose and Methacrylates: Synthesis, Thermal Stability and Biodegradability Testing

This paper presents the synthesis, thermal stability and biodegradability of new d-mannose glycopolymers. These glycopolymers have been obtained by free radical bulk copolymerization of d-mannose based glycomonomer, 1-O-(2′-hydroxy-3′-methacryloyloxypropyl)-2,3:5,6-di-O-isopropylidene-d-mannofuranose (Mm), and respectively d-mannose derived oligomer (Mo) with methyl methacrylate and respectively 2-hydroxypropyl methacrylate. The chemical structures of Mm and Mo have been confirmed via FTIR, ¹H-NMR and HPLC–MS spectroscopy. The copolymerization process has been investigated using differential scanning calorimetry, which allowed calculating the activation energies by applying Kissinger–Akahira–Sunose method. The glycopolymers are thermally stable, fact assessed by TG analysis; their glass transition temperature exceeds 50 °C, so they are part of the glassy class of polymers. The biodegradability of these glycopolymers has been investigated in vitro, using pure cultures of Zymomonas mobilis and Trichoderma reesei. The glycopolymers lose up to 55 % weight in just 14 days of incubation as their surface and composition is altered by colonies of microorganisms that grow on/into them, fact demonstrated using SEM/EDX.     

Delineation of soil and groundwater contamination using geophysical methods at a waste disposal site in Çanakkale, Turkey

Direct current (DC) resistivity, self potential (SP) and very low frequency electromagnetic (VLF-EM) measurements are carried out to detect the spread of groundwater contamination and to locate possible pathways of leachate plumes, that resulted from an open waste disposal site of Canakkale municipality. There is no proper management of the waste disposal site in which industrial and domestic wastes were improperly dumped. Furthermore, because of the dumpsite is being located at the catchment area borders of a small creek and is being topographically at a high elevation relative to the urban area, the groundwater is expected to be hazardously contaminated. Interpretations of DC resistivity geoelectrical data showed a low resistivity zone (<5 ohm-m), which appears to be a zone, that is fully saturated with leachate from an open dumpsite. The VLF-EM and SP method, support the results of geoelectrical method relating a contaminated zone in the survey area. There is a good correlation between the geophysical investigations and the results of previously collected geochemical and hydrochemical measurements.     

Odor dispersion modeling with CALPUFF: Case study of a waste and residue treatment incineration and utilization plant in Kocaeli,Turkey

This study addresses the odor problem at a waste and residue treatment incineration and utilization plant located within the borders the Alikahya district of the Kocaeli province in Turkey. In the first stage of the study, odor measurements were made at designated sampling points, while in the second stage, odor concentrations were determined at the receptor points through dispersion modelling using a USEPA (United States Environmental Protection Agency) certified long-range (>50 km) CALPUFF lagrangian puff model. In the final stage, an analysis of the predicted and observed values was carried out using such statistical methods as geometric mean bias (MG), geometric variance (VG) and fractions of predictions within a factor of two observations (FAC2).

During the modelling study, the highest one-hour concentration level was found to be 1868.10 OU (Odor Units), and the 24-hour concentration level was found to be 1316 OU, representing a decrease of approximately 30 percent. According to the measurement made, the maximum concentration value was 2455 OU. Odor measurements were carried out at 13 points within the area in order to assess the prediction results. When the results were assessed using the MG, VG and FAC2 statistical methods, it was observed that an acceptable model performance was not achieved for the whole sampling point. When the reason for this was investigated, it was concluded that the observed values were lower than the predicted values due to the fact on the measurement days, the odor was dispersed by wind. It was further concluded that the observed values were higher than the predicted values as a result of odors emitted by other plants in the area. When the measurements in residential areas were examined to identify the effect of the odors, it was determined that although the primary density of settlement is to the southwest of the plant, it was not this area that was affected most, but rather the area to the northeast, where there is a lower settlement density.     

Throughfall,stemflow, and interception characteristics of coniferous forest ecosystems in the western black sea region of Turkey (Daday example)

This study aims to identify precipitation, throughfall, stemflow, precipitation, and interception processes in pure black pine, pure Scots pine, and mixed black pine–Scots pine forest ecosystems and present the precipitation partitioning according to different stand types. Throughfall and stemflow measurements were performed using five standard precipitation gauges in a pilot area established to represent pure black pine, pure Scots pine, and mixed black pine–Scots pine stands in the Bezirgan Basin. The total precipitation was measured in an open field close to the study area. Throughfall values were calculated as the percentage of precipitation measured in an open field. According to the results of the study, the throughfall values were 69.8% in black pine, 73.9% in Scots pine, and 77.7% in the mixed black pine–Scots pine stands; the stemflow values were 2.6% in black pine, 5.9% in Scots pine, and 3.1% in the mixed black pine–Scots pine stands; the amounts of precipitation reaching the forest floor were 72.3% in black pine, 79.8% in Scots pine, and 80.7% in the mixed black pine–Scots pine stands; and the interception values were found to be 27.7% in black pine, 20.2% in Scots pine, and 19.2% in the mixed black pine–Scots pine stands.     

Landscape scale ecological monitoring as part of an EIA of major construction activities: experience at the Turkish section of the BTC crude oil pipeline project

Ecological monitoring is a complementary component of the overall environmental management and monitoring program of any Environmental Impact Assessment (EIA) report. The monitoring method should be developed for each project phase and allow for periodic reporting and assessment of compliance with the environmental conditions and requirements of the EIA. Also, this method should incorporate a variance request program since site-specific conditions can affect construction on a daily basis and require time-critical application of alternative construction scenarios or environmental management methods integrated with alternative mitigation measures. Finally, taking full advantage of the latest information and communication technologies can enhance the quality of, and public involvement in, the environmental management program. In this paper, a landscape-scale ecological monitoring method for major construction projects is described using, as a basis, 20 months of experience on the Baku-Tbilisi-Ceyhan (BTC) Crude Oil Pipeline Project, covering Turkish Sections Lot B and Lot C. This analysis presents suggestions for improving ecological monitoring for major construction activities.     

Afforestation areas defined by GIS in Gölbaşı specially protected area Ankara/Turkey

This paper concentrates on determining the areas for afforestation and the development of conservation strategies and actions in the case where there is high demand for the conservation of a particular land area. The analysis of hydrological landscape structure and of erodibility was prerequisite in the methodological design considering the site-specific natural landscape characteristics of the study area. The Gölba?? Specially Protected Area (SPA) being the case area has many local environmental disturbances, especially with respect to its hydrological system, and the area is beset by increasing demands for its use by the burgeoning human population. It is obviously clear that the present intensive demand for recreational use will be forecasted further increase in the future. The count of rural residences is estimated to increase by 50% over the next decade. This intensive demand shall further strain the carrying capacity of the ecological milieu, which has already suffered to a significant degree because of the present urban and rural activities. The Gölba?? district is located only 20 km from the city center of Ankara, and its surroundings were legally designated to be a Specially Protected Area primarily for the existence of lacustral and fluvial systems where two interconnected lakes exist: Mogan and E?mir Lakes. Essentially, the continuity of the lacustral and fluvial system of Lakes Mogan and E?mir depends on the preservation and improvement of the water sources. However, interconnected surface water bodies of these lakes are actually quite contaminated, and a decline in the water flow from Mogan to E?mir has been observed. For the elaboration of the present method, required conventional maps (at 1/25,000 scale) of topography (for slope analysis) and geology (for erodibility and permeability analysis) were transferred to computer media using AutoCAD® R.14 software. The rectification of the transferred data was done using ERDAS® Imagine 8.3. All data were then transferred into a GIS engine (Arcview® 3.2). This software provided the ability to create, manipulate, analyze and display topologically correct geographic data in digital form. The method proceeded according to the following phases: 1. Analysis of the hydrologic landscape structure; 2. Permeability of the soil structure; 3. Permeability of the geological structure; 4. Conservation zones.     

Ecological risk assessment of heavy metals in surface sediments of northern littoral zone of Lake Çıldır,Ardahan, Turkey

In this paper, the heavy metal levels (Cu, Pb, Zn, Ni, Mn, Fe, As, Cd, Cr, Hg), organic carbon, and chlorophyll degradation products were studied to prove their ecological effects in Lake Ç?ld?r, where fossil fuels are used as an energy source in the studied area for most of the year, and domestic waste from settlements is discharged directly into the lake. Sediment samples were collected from six sites on the northern shore of Ç?ld?r Lake, Turkey in November 2012. Enrichment (EF) and contamination factor (CF) values were determined, and Pollution Load (PLI) and Potential Ecological Risk (PER) indices were calculated. Average concentrations of heavy metals in the sediments were, in descending order, Fe?>?Mn?>?Zn?>?Ni?>?Cr?>?Cu?>?Pb?>?As?>?Cd?>?Hg, respectively. According to mean values, the source of these elements may be considered natural due to lack of enrichment in Cu, Pb, Zn, Ni, and Cr in the sediment samples. Regarding enrichment of As, Cd, Mn, and Hg, the highest EF belongs to Hg. PLI and PER values indicate there are moderate ecological risk in the lake.