HPLC determination of chlorate metabolism in bovine ruminal fluid

Salmonella and Escherichia coli are two bacteria that are important causes of human and animal disease worldwide. Chlorate is converted in the cell to chlorite, which is lethal to these bacteria. An HPLC procedure was developed for the rapid analysis of chlorate (ClO₃ ^?), nitrate (NO₃ ^?), and nitrite (NO₂ ^?) ions in bovine ruminal fluid samples. Standard curves for chlorite, nitrite, nitrate, and chlorate were well defined linear curves with R² values of 0.99846, 0.99106, 0.99854, and 0.99138, respectively. Concentrations of chlorite could not be accurately determined in bovine ruminal fluid because chlorite reacts with or binds a component(s) or is reduced to chloride in bovine ruminal fluid resulting in low chlorite measurements. A standard curve ranging from 25 to 150 ppm ClO₃ ^? ion was used to measure chlorate fortified into ruminal fluid. The concentration of chlorate was more rapidly lowered (P < 0.01) under anaerobic compared to aerobic incubation conditions. Chlorate alone or chlorate supplemented with the reductants sodium lactate or glycerol were bactericidal in anaerobic incubations. In anaerobic culture, the addition of sodium formate to chlorate-fortified ruminal fluid appeared to decrease chlorate concentrations; however, formate also appeared to moderate the bactericidal effect of chlorate against E. coli. Addition of the reductants, glycerol or lactate, to chlorate-fortified ruminal fluid did not increase the killing of E. coli at 24 h, but may be useful when the reducing equivalents are limiting as in waste holding reservoirs or composting systems required for intense animal production.     

Air Pollution In Pittsburgh: A Historical Perspective

Sources and concentrations of indoor air pollutants and aeroallergens were evaluated in the arid Southwest community of Tucson, Arizona. One major purpose was to appraise the interaction of indoor and outdoor human exposures. A rough time budget study showed that 74% of adults spent 75% or more of their time in some indoor environment. Outdoor and indoor concentrations of TSP, RSP, CO, O₃ and aeroallergens were measured for 41 detached dwellings. Small area and basin monitoring occurred for TSP, CO, NO₂, O₃ and aeroallergens; ambient TSP frequently exceeds NAAQS and both CO and O3 do occasionally. Indoor TSP and RSP were lower than outdoors and were of a different composition. Outdoor infiltration falls rapidly for particles and pollen, related to distance Indoors. CO was low and O₃ was very low indoors. TSP and RSP correlated significantly with tobacco smoking and CO correlated with gas stove usage. Temperature varied minimally indoors and relative humidity indoors was similar to outdoor readings In this climate. It was concluded that better particle characterization and better estimates of total exposure are required.     

Relationship of Particulate Control,SO2 Removal,and Waste Management

Results with the EPRI 2.5 MW(e) Integrated Environmental Control Pilot Plant (IECPP) indicate the interrelationship of particulate penetration, SO₂ scrubber operation, waste production, and waste properties. Tests compared a fabric filter/wet scrubber and ESP/wet scrubber, the latter operated to simulate 1979 New Source Performance Standards (NSPS), 1971 NSPS, and pre-NSPS ESP units. Tests were conducted with low-sulfur coal producing a flue gas concentration of400ppm; flue gas spiking could be used to increase SO₂ to 2000 ppm. Scrubber waste was dewatered in a thickener and vacuum belt filter (to 55 percent solids content), and mixed with fly ash. The pilot SO₂ scrubber—when preceded by an ESP and forced to operate in zero-discharge—captured less SO₂ than when preceded by a fabric filter. Also, scrubber operation with the ESP produced a greater quantity of waste with difficult handling characteristics, as compared to operation with the fabric filter. These difficulties occurred with particulate penetration above 0.10 lb/MBtu, which could reduce reagent utilization to 80percent. These results are attributable to inhibited limestone dissolution due to accumulation of an aluminum/fluoride compound. For both lowsulfur and simulated high-sulfur test conditions, allowing wastewater discharge to purge aluminum/fluoride content restored performance to design levels. Particulate control efficiency also affected solid waste physical properties. The fabric filter/wet scrubber produced the lowest solid waste permeability (10^?8 cm/s). ESP operation at 1979 NSPS and pre-1971 NSPS ESPs increased solid waste permeability to 10^?7 and 10^?6 cm/s, respectively. These results are meaningful for SO₂ scrubbers both for new plants and for retrofit to units with pre-NSPS ESPs, and could become significant with the increasing trend to restricted water discharge.     

Measurement of Ultrafine Particle Size Distributions from Coal-, Oil-, and Gas-Fired Stationary Combustion Sources

Abstract

Currently, we have limited knowledge of the physical and chemical properties of emitted primary combustion aerosols and the changes in those properties caused by nucleation, condensation growth of volatile species, and particle coagulations under dilution and cooling in the ambient air. A dilution chamber was deployed to sample exhaust from a pilot-scale furnace burning various fuels at a nominal heat input rate of 160 kW/h^?1 and 3% excess oxygen. The formation mechanisms of particles smaller than 420 nm in electrical mobility diameter were experimentally investigated by measurement with a Scanning Mobility Particle Sizer (SMPS) as a function of aging times, dilution air ratios, combustion exhaust temperatures, and fuel types. Particle formation in the dilution process is a complex mixture of nucleation, coagulation, and condensational growth, depending on the concentrations of available condensable species and solid or liquid particles (such as soot, ash) in combustion exhausts. The measured particle size distributions in number concentrations measured show peaks of particle number concentrations for medium sulfur bituminous coal, No. 6 fuel oil, and natural gas at 40-50 nm, 70-100 nm, and 15-25 nm, respectively. For No. 6 fuel oil and coal, the particle number concentration is constant in the range of a dilution air ratio of 50, but the number decreases as the dilution air ratio decreases to 10. However, for natural gas, the particle number concentration is higher at a dilution air ratio of 10 and decreases at dilution air ratios of 20-50. At a dilution air ratio of 10, severe particle coagulation occurs in a relatively short time. Samples taken at different combustion exhaust temperatures for these fuel types show higher particle number concentrations at 645 K than at 450 K. As the aging time of particles increases, the particles increase in size and the number concentrations decrease. The largest gradient of particle number distribution occurs within the first 10 sec after dilution but shows only minor differences between 10 and 80 sec. The lifetimes of the ultrafine particles are relatively short, with a scale on the order of a few seconds. Results from this study suggest that an aging time of 10 sec and a dilution air ratio of 20 are sufficient to obtain representative primary particle emission samples from stationary combustion sources.     

Testing implementation conditions for in-vehicle information systems

In the European 6th Framework Programme, fundamental research in the field of technology assessment regarding behavioural effects was conducted in the HASTE (Human machine interface And the Safety of Traffic in Europe) project. Methods, metrics and scenarios for the exploration of safety problems related to IVIS (in-vehicle information systems) were defined and applied to the evaluation of surrogate systems in the laboratory originally and real systems subsequently, in laboratories and field studies. The results of the laboratory and field studies led to the formulation of guidelines for a standardized test regime regarding existing and newly developed IVIS. In this way the HASTE project has succeeded in the development of a valid, reliable and efficient tool that may aid testing authorities in their safety evaluation of IVIS.     

The Development of an Ecosystem Services Framework for South East Queensland

Extensive research has been conducted globally into conceptual frameworks for ecosystem services, the most notable being the Millennium Ecosystem Assessment (Millennium ecosystem assessment: ecosystems and human well-being; a framework for assessment. World Resources Institute, Washington, DC, pp 51, 53–55, 2005). The South East Queensland (SEQ) Ecosystem Services Framework (Australia) aims to provide the tools to enable government, industry, business, researchers, non-government organizations and land managers to apply the concept of ecosystem services in their planning and management practices. This article describes the Framework and the process that has produced matrices and maps that identify and illustrate the linkages between ecosystems, ecosystem functions, ecosystem services and the community’s well-being. The matrices and maps derived can identify areas in the region where the most ecosystem services are generated. This allows areas to be considered as valuable natural assets of the region, deserving appropriate protection measures or significant offsets if they are diminished or degraded in any way. Although the Framework requires further refinement and ongoing development, the process applied and the products produced has enabled decision makers to turn the concept of ecosystem services into practical application in SEQ.     

Simulating N2O fluxes from a Brazilian cropped soil with contrasted tillage practices

Assessing the N₂O fluxes balance is a key challenge to estimate the effect of agriculture practices on greenhouse gas production. N₂O fluxes remained difficult to measure on a field scale due to high spatial and temporal variability and usually low concentrations. Our work aimed at (i) characterizing by laboratory measurements soil potential N₂O emissions from nitrification and denitrification and (ii) testing a modelling approach of N₂O emissions that circumvents the problem of discrete measurements for two Brazilian rainfed rice cropping systems, no-tillage (NT) vs. disk tillage (DT). This latter approach consisted in the combination of 2 models: a mechanistic water transfer model and a N₂O emission model, namely PASTIS and NOE. Simulations with the PASTIS + NOE approach showed for both NT and DT treatments that: (i) the soil emitted low amounts of N₂O, (ii) emissions by denitrification corresponded to short periods of high N₂O emissions (15 times as high as emission by nitrification), (iii) nitrification contributed to ca 35% of the total N₂O emissions at the crop cycle scale, (iv) field N₂O emission measurements corresponded to the low bound of simulated emissions from nitrification.