Laboratory studies on formation and minimisation of polychlorinated dibenzodioxins and -furans (PCDD/F) in secondary aluminium process

The objectives of this work were to study the formation mechanisms of polychlorinated dibenzo-p-dioxins/polychlorinated dibenzofurans (PCDD/F) in thermal aluminium recycling processes by use of laboratory experiments. The pattern of isomers of PCDD/F indicates that de novo synthesis is important in aluminium smeltery. The mechanisms of PCDD/F formation in aluminium smelting are similar to that of various incineration processes of waste material. The results of bioanalysis (EROD-test) confirms the existence of de novo synthesis of PCDD/F, but points out to the existence to some additional, toxic compounds of unknown structure. To reduce the amount of PCDD/F the input of carbon at the metal should be reduced; in addition the metal smeltery plants should be cleaned from fly ash particles. It is suggested to use good primary methods in the technical plants like constant feeding of the metal into the oven will minimise PCDD/F concentration. The biological EROD-bioassay is a good tool to estimate PCDD/F-TEQ values also for this technical process simulated in the laboratory.     

When workplace safety depends on behavior change: Topics for behavioral safety research

Introduction

Comprehensive interventions that address public-health concerns invariably include behavior-change strategies. In occupational safety and health, behavioral safety is an approach designed to improve safety performance directly through peer observations of safe behaviors, goal setting, performance feedback, and celebrations or incentives for reaching safety goals. Although the basic components of behavioral safety processes have been studied and widely documented, the current safety literature reveals several gaps in knowledge. These gaps are associated mostly with wide practice variations among the common process elements and uncertainty about the influence of organizational and other external factors.

Impact to Industry

A major objective of this paper was to highlight not only key topic areas that warrant further research, but also to propose a list of research questions that are tied to uncertainties about various intervention practices. If only a portion of these topic areas and research questions are addressed through systematic reviews, field interventions, surveys, and laboratory-based studies, then the knowledge gained will significantly improve the delivery and effectiveness of behavioral safety interventions and thus their impact on worker health and safety.     

Multivariate analysis of potentially toxic metals in sediments of a tropical coastal lagoon

Surface sediments collected from the Lagos Lagoon, Nigeria, and three adjoining rivers were analysed for their physicochemical properties and pseudo-total concentration of the potentially toxic metals (PTM) Cd, Cr, Cu, Pb and Zn. The concentration of the PTM varied seasonally and spatially. Odo-Iyaalaro was observed to be the most polluted river, with highest concentrations of 42.1 mg kg^?1, 102 mg kg^?1, 185 mg kg^?1, 154 mg kg^?1 and 1040 mg kg^?1 of Cd, Cr, Cu, Pb and Zn, respectively, while Ibeshe River was the least contaminated, apart from a site affected by Cu from the textile industry. Some of the sediments were found to be above the consensus-based probable effect concentrations and Dutch sediment guideline for metals. Overall metal concentrations were similar to those reported for other tropical lagoon and estuarine systems affected by anthropogenic inputs as a result of rapid urbanisation. Due to the large number of samples, principal component analysis was used to examine relationships within the data set. Generally, sediments collected during the dry season were observed to have higher concentration of PTM than those collected during the rainy season. This means that PTM could accumulate over a prolonged period and then be released relatively rapidly, on an annual basis, into tropical lagoon systems.     

Regional status assessment of stony corals in the US Virgin Islands

States may protect coral reefs using biological water quality standards outlined by the Clean Water Act. This requires biological assessments with indicators sensitive to human disturbance and regional, probability-based survey designs. Stony coral condition was characterized on a regional scale for the first time in the nearshore waters of the US Virgin Islands (USVI). Coral composition, abundance, size, and health were assessed at 66 stations in the St. Croix region in fall 2007 and at 63 stations in the St. Thomas and St. John region in winter 2009. Indicators were chosen for their sensitivity to human disturbance. Both surveys were probability-based (random) designs with station locations preselected from areas covered by hardbottom and coral reef substrate. Taxa richness was as high as 21 species but more than half the area of both regions exhibited taxa richness of <10 species in the 25 m² transect area. Coral density was as high as 5 colonies m^?2 but more than half the area of both regions had <2 colonies m^?2. Both regions showed similar dominant species based on frequency of occurrence and relative abundance. Because of large colony sizes, Montastrea annularis provided more total surface area and live surface area than more abundant species. The surveys establish baseline regional conditions and provide a foundation for long-term regional monitoring envisioned by the USVI Department of Planning and Natural Resources. The probabilistic sampling design assures the data can be used in Clean Water Act reporting.     

Mercury pollution in a mining area of Guizhou,China: Fluxes over contaminated surfaces and concentrations in air,biological and geological samples

A dynamic flux chamber has been used to estimate fluxes of mercury over different types of surfaces in an abandoned open‐cut mine of Tongren prefecture, Guizhou province, China during spring and summer of 1996. The highest fluxes were obtained over cinnabar slag and contaminated soils, whereas the emissions above cinnabar ore were substantially lower. These fluxes was scaled up to estimate the contribution of mercury emissions to air from mercury wastes, compared to anthropogenic activities in the province of Guizhou, China. Atmospheric mercury concentrations measured were enhanced in the mining area (<1.3 μg m^‐3) compared to regional background sites (1.8–5.1 ng m^‐3). The spreading of mercury was estimated by using biological and geological samples. Moss bags have been employed to estimate long‐time dry‐ and wet‐deposition to this area.     

Advanced solid-state carbon-13 nuclear magnetic resonance spectroscopic studies of sewage sludge organic matter: detection of organic "domains"

Two novel solid-state 13C nuclear magnetic resonance (NMR) spectroscopic techniques, PSRE (proton spin relaxation editing) and RESTORE [Restoration of Spectra via T(CH) and T(1rho)H (T One Rho H) Editing], were used to provide detailed chemical characterization of the organic matter from six Australian sewage sludges. These methods were used to probe the submicrometer heterogeneity of sludge organic matter, and identify and quantify spatially distinct components. Analysis of the T1H relaxation behavior of the sludges indicated that each sludge contained two types of organic domains. Carbon-13 PSRE NMR subspectra were generated to determine the chemical nature of these domains. The rapidly relaxing component of each sludge was rich in protein and alkyl carbon, and was identified as dead bacterial material. The slowly relaxing component of each sludge was rich in carbohydrate and lignin structures, and was identified as partly degraded plant material. The bacterial domains were shown, using the RESTORE technique, to also have characteristically rapid T(1rho)H relaxation rates. This rapid T(1rho)H relaxation was identified as the main cause of underrepresentation of these domains in standard 13C cross polarization (CP) NMR spectra of sludges. The heterogeneous nature of sewage sludge organic matter has implications for land application of sewage sludge, since the two components are likely to have different capacities for sorbing organic and inorganic toxicants present in sewage sludge, and will decompose at different rates.     

Response of Ceriodaphnia dubia to ionic silver: discrepancies among model predictions, measured concentrations and mortality

Silver thiosulfate, often a waste product of photoprocessing, is less bioavailable or toxic to aquatic organisms than is ionic silver. We conducted duplicate 48-h Ceriodaphnia dubia tests in reconstituted laboratory water using treatments of 92.7 nM Ag+ with various concentrations of thiosulfate. Expected Ag+ concentrations were generated for thiosulfate treatment levels using MINEQL + chemical equilibrium modeling. Ag+ concentrations in treatments were determined using a novel silicon-based sensor. Based on predicted Ag+ and published 48-h LC50 values for C. dubia, we did not expect to observe adverse effects. Yet, 100% mortality was observed at low thiosulfate treatments, whereas > 85% and > 95% survival was observed at higher thiosulfate treatment levels, respectively. Our results indicate that biotic responses match the sensor-based Ag+ concentrations. However, there is a discrepancy between these empirical results and responses expected to occur with Ag+ concentrations as predicted by MINEQL + chemical modeling. By correlating silicon sensor data with toxicity results obtained from our laboratory, our work clearly relates a specific chemical form (Ag+) to toxicity results.     

Airborne reduced nitrogen: ammonia emissions from agriculture and other sources

Ammonia is a basic gas and one of the most abundant nitrogen-containing compounds in the atmosphere. When emitted, ammonia reacts with oxides of nitrogen and sulfur to form particles, typically in the fine particle size range. Roughly half of the PM(2.5) mass in eastern United States is ammonium sulfate, according to the US EPA. Results from recent studies of PM(2.5) show that these fine particles are typically deposited deep in the lungs and may lead to increased morbidity and/or mortality. Also, these particles are in the size range that will degrade visibility. Ammonia emission inventories are usually constructed by multiplying an activity level by an experimentally determined emission factor for each source category. Typical sources of ammonia include livestock, fertilizer, soils, forest fires and slash burning, industry, vehicles, the oceans, humans, pets, wild animals, and waste disposal and recycling activities. Livestock is the largest source category in the United States, with waste from livestock responsible for about 3x10(9) kg of ammonia in 1995. Volatilization of ammonia from livestock waste is dependent on many parameters, and thus emission factors are difficult to predict. Despite a seasonal variation in these values, the emission factors for general livestock categories are usually annually averaged in current inventories. Activity levels for livestock are from the USDA Census of Agriculture, which does not give information about animal raising practices such as housing types and grazing times, waste handling systems, and approximate animal slurry spreading times or methods. Ammonia emissions in the United States in 1995 from sources other than livestock are much lower; for example, annual emissions are roughly 8x10(8) kg from fertilizer, 7x10(7) kg from industry, 5x10(7) kg from vehicles and 1x10(8) kg from humans. There is considerable uncertainty in the emissions from soil and vegetation, although this category may also be significant. Recommendations for future directions in ammonia research include designing experiments to improve emission factors and their resolution in all significant source categories, developing mass balance models, and refining of the livestock activity level data by eliciting judgment from experts in this field.