Mediterranean cyclones and windstorms in a changing climate

Changes in the frequency and intensity of cyclones and associated windstorms affecting the Mediterranean region simulated under enhanced Greenhouse Gas forcing conditions are investigated. The analysis is based on 7 climate model integrations performed with two coupled global models (ECHAM5 MPIOM and INGV CMCC), comparing the end of the twentieth century and at least the first half of the twenty-first century. As one of the models has a considerably enhanced resolution of the atmosphere and the ocean, it is also investigated whether the climate change signals are influenced by the model resolution. While the higher resolved simulation is closer to reanalysis climatology, both in terms of cyclones and windstorm distributions, there is no evidence for an influence of the resolution on the sign of the climate change signal. All model simulations show a reduction in the total number of cyclones crossing the Mediterranean region under climate change conditions. Exceptions are Morocco and the Levant region, where the models predict an increase in the number of cyclones. The reduction is especially strong for intense cyclones in terms of their Laplacian of pressure. The influence of the simulated positive shift in the NAO Index on the cyclone decrease is restricted to the Western Mediterranean region, where it explains 10–50 % of the simulated trend, depending on the individual simulation. With respect to windstorms, decreases are simulated over most of the Mediterranean basin. This overall reduction is due to a decrease in the number of events associated with local cyclones, while the number of events associated with cyclones outside of the Mediterranean region slightly increases. These systems are, however, less intense in terms of their integrated severity over the Mediterranean area, as they mostly affect the fringes of the region. In spite of the general reduction in total numbers, several cyclones and windstorms of intensity unknown under current climate conditions are identified for the scenario simulations. For these events, no common trend exists in the individual simulations. Thus, they may rather be attributed to long-term (e.g. decadal) variability than to the Greenhouse Gas forcing. Nevertheless, the result indicates that high-impact weather systems will remain an important risk in the Mediterranean Basin.     

Biomonitoring spatial and temporal impact of atmospheric dust from a cement industry

The objective of this work was to evaluate the spatial and temporal impact of dust-pollution in the vicinity of a cement industry, located in an area with dry climate. The spatial impact integrated over time was evaluated from the concentrations of Ca, Fe and Mg in in-situ Xanthoria parietina. The temporal pattern was assessed through one-month transplants of the lichen Ramalina canariensis. Four potential sources of atmospheric dust were evaluated: the limestone-quarry; the unpaved roads, the deposit area and the cement mill. Calcium concentration in lichens was considered the best cement-dust indicator. Different types of dust (clinker and grinded-limestone-dust) resulted in different time-patterns of Ca accumulation, which was also related with the different influence that wet and dry periods have in the lichen accumulation process. The dust pollution was found to be deposited locally and dependent on: the nature of dust particles and the volume and frequency of precipitation.     

Host location behavior of Cotesia plutellae Kurdjumov (Hymenoptera: Braconidae) in ambient and moderately elevated ozone in field conditions

In field O₃-enrichment experiments increased herbivore densities have been reported, which could be due to negatively affected host location behavior of natural enemies. We addressed the impact of doubling background O₃ on the host location of the parasitoid Cotesia plutellae by conducting 24-h trials in an open-air O₃-fumigation system during two consecutive years. Two circles (radii 1.40 and 4.00 m) of Plutella xylostella-infested potted cabbage plants were placed in the O₃ and ambient plots. Female wasps were released into each plot from the center, and observed 5 times over a 24-h period to assess their host location capability. Thereafter, plants were kept in laboratory conditions until larvae pupation to determine parasitism rates. No significant differences were detected between ambient and O₃-enriched environments either in the number of wasps found in the field, or in the percentages of parasitized larvae. This suggests that moderately elevated O₃ will not affect the behavior of this parasitoid.     

Impact of neighbourhood land-cover in epiphytic lichen diversity: analysis of multiple factors working at different spatial scales

The objective of this work was to determine the impact of neighbourhood land-cover in epiphytic lichen diversity. We used geostatistics to analyse the spatial structure of lichen-indicators (number of lichen species and Lichen Diversity Value) and correlate them to land-cover considering different distances from the observed data. The results showed that lichen diversity was influenced by different environmental factors that act in the same territory but impact lichens at different distances from the source. The differences in the distance of influence of the several land-cover types seem to be related to the size of pollutants/particles that predominantly are dispersed by each land-cover type. We also showed that a local scale of analysis gives a deeper insight into the understanding of lichen richness and abundance in the region. This work highlighted the importance of a multiple spatial scale of analysis to deeply interpret the relation between lichen diversity and the underling environmental factors.     

Proposal for an Integral Quality Index for Urban and Urbanized Beaches

A composite index, based on function analysis and including thirteen sub-indices, was developed to assess the overall quality of urban and urbanized beaches in the Mediterranean area. The aggregation of components and sub-indices was based on two questionnaires completed by beach users and experts. Applying the new Beach Quality Index (BQI) demonstrated that the quality of beaches could be improved. In general, the strongest aspects of the beaches assessed were those related to short-term user demand, and the weakest were those related to the consequences of human pressure on the area, in particular, erosion problems. The composite index is intended to be used together with Environmental Management Beach Systems (EMBs) as a hierarchical management scorecard and in monitoring programs. This new tool could also make planning more proactive by synthesizing the state of the most important beach processes.     

Toward verifying fossil fuel CO2 emissions with the CMAQ model: Motivation,model description and initial simulation

Motivated by the question of whether and how a state-of-the-art regional chemical transport model (CTM) can facilitate characterization of CO₂ spatiotemporal variability and verify CO₂ fossil-fuel emissions, we for the first time applied the Community Multiscale Air Quality (CMAQ) model to simulate CO₂. This paper presents methods, input data, and initial results for CO₂ simulation using CMAQ over the contiguous United States in October 2007. Modeling experiments have been performed to understand the roles of fossil-fuel emissions, biosphere–atmosphere exchange, and meteorology in regulating the spatial distribution of CO₂ near the surface over the contiguous United States. Three sets of net ecosystem exchange (NEE) fluxes were used as input to assess the impact of uncertainty of NEE on CO₂ concentrations simulated by CMAQ. Observational data from six tall tower sites across the country were used to evaluate model performance. In particular, at the Boulder Atmospheric Observatory (BAO), a tall tower site that receives urban emissions from Denver, CO, the CMAQ model using hourly varying, high-resolution CO₂ fossil-fuel emissions from the Vulcan inventory and CarbonTracker optimized NEE reproduced the observed diurnal profile of CO₂ reasonably well but with a low bias in the early morning. The spatial distribution of CO₂ was found to correlate with NOx, SO₂, and CO, because of their similar fossil-fuel emission sources and common transport processes. These initial results from CMAQ demonstrate the potential of using a regional CTM to help interpret CO₂ observations and understand CO₂ variability in space and time. The ability to simulate a full suite of air pollutants in CMAQ will also facilitate investigations of their use as tracers for CO₂ source attribution. This work serves as a proof of concept and the foundation for more comprehensive examinations of CO₂ spatiotemporal variability and various uncertainties in the future.

Implications: Atmospheric CO₂ has long been modeled and studied on continental to global scales to understand the global carbon cycle. This work demonstrates the potential of modeling and studying CO₂ variability at fine spatiotemporal scales with CMAQ, which has been applied extensively, to study traditionally regulated air pollutants. The abundant observational records of these air pollutants and successful experience in studying and reducing their emissions may be useful for verifying CO₂ emissions. Although there remains much more to further investigate, this work opens up a discussion on whether and how to study CO₂ as an air pollutant.     

Pyrrolidinium Imides: Promising Ionic Liquids for Direct Capture of Elemental Mercury from Flue Gas

A new approach to vapor phase elemental mercury capture has been explored; this approach exploits an ionic liquid coating layer to oxidize elemental mercury for subsequent immobilization by chelating ligands. The room temperature ionic liquid 1-butyl-1-methyl pyrrolidinium bis(trifluoromethane sulfonyl)imide (P₁₄) was selected for study based on its oxidation potential window, thermal stability, and low vapor pressure. Tests were also completed in which KMnO₄ was added to P₁₄ to form a new ionic liquid, P₁₄–KMnO₄, with a higher oxidation potential. In room-temperature bulk liquid phase capture experiments, 59% of the elemental mercury in the inlet gas was captured using P₁₄ alone; mercury capture using P₁₄–KMnO₄ was quantitative. P₁₄ and P₁₄–KMnO₄ coatings were successfully applied to mesoporous silica substrates and to silica substrates functionalized with mercury chelating ligands. The coating layers were found to be thermally stable up to 300°C. Fixed-bed tests of nonfunctionalized silica coated with P₁₄ showed an elemental mercury uptake of 2.7 mg/g adsorbent at 160°C; at the same temperature, functionalized silica coated with P₁₄–KMnO₄ showed an elemental mercury capacity of at least 7.2 mg/g adsorbent, several times higher than that of activated carbon. The empty bed gas residence time in these tests was 0.04 s. A chelating adsorbent incorporating P₁₄ in the coating layer, may be capable of simultaneous removal of elemental and oxidized mercury from coal combustion flue gases.     

Landscape-scale spatial distribution of the Lanner Falcon (Falco biarmicus feldeggii) breeding population in Italy

Falco biarmicus feldeggii is one of the most threatened taxa in Europe. Its global population is estimated at a few hundred pairs unequally scattered in a vast and fragmented area stretching from Sicily to the Caspian Sea. Most recent counts showed that Italy hosts a large part (>25%) of the whole population. Consequently, Italian authorities promoted a national action plan. In this framework, we carried out the first national survey for the Lanner Falcon in Italy (2003-2004). Our study area covered the whole breeding range, i.e., Sicily and the Italian peninsula (n = 2909 cells 10 x 10 km). When possible, we considered also additional information from previous regional investigations (1993-2001). First, we estimated size and distribution of each breeding subpopulation. Then, we tried to identify, at landscape level, the main environmental features linked to the spatial distribution of the nesting sites. We found the Lanner Falcon in 184 cells (6.4% of the total grid map), but we estimated no more than 140-172 pairs (70-80 of which are in Sicily) in the same breeding season. Higher levels of isolation characterize the continental breeding cells whereas in Sicily cells are much more clustered. Altitude is the main factor influencing cell aggregations in Italy; nevertheless, other environmental variables, such as climate, precipitation, and vegetation may be important. Our results show that the conservation measures adopted in Italy are somewhat inadequate given the low number of breeding pairs included in protected areas (23%-28%). Many small and scattered special areas of conservation (SAC) devoted to conserve priority habitats fit the irregular spatial aggregations of Lanner Falcon sites better than several large special protection areas (SPA).     

An inhibitor of urease activity effectively reduces ammonia emissions from soil treated with urea under Mediterranean conditions

Urea is an important source of ammonia (NH₃) emissions to the atmosphere from agricultural soils. Abatement strategies are necessary in order to achieve NH₃ emission targets by reducing those emissions. In this context, a field experiment was carried out on a sunflower crop in spring 2006 with the aim of evaluating the effect of the N-(n-butyl) thiophosphoric triamide (NBPT) in the mitigation of volatilized NH₃ from a urea-fertilised soil. Ammonia emission was quantified, using the integrated horizontal flux (IHF) method, following application of urea with and without the urease inhibitor NBPT. Urea and a mixture of urea and NBPT (0.14%, w/w) were surface-applied at a rate of 170 kg N ha⁻¹ to circular plots (diameter 40 m). The soil was irrigated with 10 mm of water just after the application of urea to dissolve and incorporate it into the upper layer of soil. Over the duration of the measurement period (36 days) three peaks of NH₃ were observed. The first peak was associated with hydrolysis of urea after irrigation and the others with the increase of ammonia in soil solution after changes in atmospheric variables such as wind speed and rainfall. The total NH₃ emission during the whole experiment was 17.3 ± 0.5 kg NH₃–N ha⁻¹ in the case of urea treated soils and 10.0 ± 2.2 kg NH₃–N ha⁻¹ where NBPT was included with the urea (10.1 and 5.9%, respectively, of the applied urea–N). The lower NH₃ emissions from plots fertilised with urea + NBPT, compared with urea alone, were associated with a reduction in urease activity during the first 9 days after inhibitor application. This reduction in enzymatic activity promoted a decrease in the exchangeable NH₄⁺ pool.