电动增压补气消除柴油机瞬态加速冒烟的试验

将自行开发的、适用车载24V电源的电动增压补气系统在一台490QDI柴油机上进行了实验研究.实验工况包括起始负荷分别为0和40N.m的加载加速的瞬态工况以及1400r·min-1、60N·m,1600 r·min-1、90N-m和1800 r.min-1、120N·m 3种低转速、大扭矩稳态工况,针对以上工况分别进行了有无电动增压补气的实验.试验结果表明,有电动增压补气的柴油机同原机相比,零负荷加载加速时的微粒排放降低达70%以上,瞬间输出功率最大可提高54.5%;在稳态工况时,HC、CO排放都随着电机转速的升高而降低,最大减少量分别达到66.7%和75.O%;波许烟度平均减小50%以上.此外,加速补气对提高燃油经济性也有一定效果,比油耗最大能降低7.46%.     

光化学烟雾模拟实验系统

为开展光化学污染成因的敏感性分析,设计和建立了目前国内唯一的大型光化学烟雾模拟实验系统．该系统主要包括烟雾箱系统、空气充填置换系统、采样测试系统和记录显示控制系统等4个分系统．与国内外同类型实验系统相比,该系统具有烟雾箱在实验过程中受光均匀、换气系统快捷、效率高以及可实现两箱对比实验等特色．利用实验系统开展了光化学污染过程的模拟实验,得到了典型的污染特征．进行了同等条件的两箱对比实验,实验结果完全一致,表明该实验系统能够开展基于对比实验的敏感性分析研究,从而为进一步针对北京实际开展光化学污染的模拟研究奠定了良好的基础．     

Efficient adsorption of Mn(Ⅱ) by layered double hydroxides intercalated with diethylenetriaminepentaacetic acid and the mechanistic study

In this study, greatly enhanced Mn(II) adsorption was achieved by as-synthesized diethylenetriaminepentaacetate acid intercalated Mg/Al layered double hydroxides(LDHsDTPA). The adsorption capacity of LDHs-DTPA was 83.5 mg/g, which is much higher than that of LDHs-EDTA(44.4 mg/g), LDHs-Oxalate(21.6 mg/g) and LDHs(28.8 mg/g). The adsorption data of aqueous Mn(II) using LDHs-DTPA could be well described by the pseudosecond order kinetics and Langmuir isotherm model. Thermodynamics study results also showed that the adsorption process of Mn(II) by LDHs-DTPA was exothermic as indicated by the negative ΔH value. Furthermore, based on the structural, morphological and thermostable features, as well as FT-IR and XPS characterizations of LDHs-DTPA and the pristine LDHs, the adsorption mechanism of Mn(II) was proposed. The carboxyl groups of DTPA were proposed to be the main binding sites for Mn(II), and the hydroxyl groups of LDHs also played a minor role in the adsorption process. Among the three common regeneration reagents, 0.1 mol/L Na_2CO_3 was the best for reusing LDHs-DTPA in Mn(II)adsorption. Besides, the Mn(II) adsorption performance could be hindered in the presence of typical inorganic ions, especially cations. Further specific modifications of LDHs-DTPA are suggested to get more selective adsorption of Mn(II) in practical applications.     

氚水在大豆土壤系统中的迁移与分布

采用模拟污染物的同位素示踪技术研究氚水在大豆-土壤模拟生态系统中的迁移、分布规律.通过为期50d的模拟试验,测定了植物和土壤样品中2种形态氚(自由水氚和结合态氚)的比活度.结果表明:引入土壤中的氚水,不仅在系统各分室间转移和分配,而且迅速向系统外散逸;氚水中的氚以自由水氚和结合态氚形态存在于大豆植株和土壤中;大豆植株中的自由水氚比活度于6h时即达最大值(根19.4Bq·g^-1;茎叶12.3Bq·g^-1),随后便逐渐下降,而结合态氚呈缓慢增加;大豆根中的总氚比活度开始时高于茎叶中的比活度,而后趋于平衡,表层土中2种形态氚基本呈逐渐下降.运用示踪动力学分室模型原理对实验数据拟合得:土壤中的比活度C_s=88.37e^-11.847t+7.38e^-0030t;大豆植株中的比活度C_b=10.30(e^-0.030t-e^-11.847t).     

Fabrication and photoelectrocatalytic properties of nanocrystalline monoclinic BiVO4 thin-film electrode

Monoclinic bismuth vanadate(BiVO4) thin film was fabricated on indium-tin oxide glass from an amorphous heteronuclear complex via dip-coating.After annealation at 400,500,and 600°C,the thin films were characterized by X-ray diffraction,field emission scanning electron microscopy,X-ray photoelectron spectroscopy,and UV-Vis spectrophotometry.The BiVO4 particles on the ITO glass surface had a monoclinic structure.The UV-Visible diffuse reflection spectra showed the BiVO4 thin film had photoabsorption propertie...     

铊在矿物胶体和天然有机质界面上迁移转化行为的研究进展

铊(Tl)是典型的毒害重金属元素之一,对生物体的毒性高于Hg、Cd和Pb等元素。铊在天然水环境相关介质中的背景含量较低,但可通过各种工业活动大量进入水体环境,借由水体迅速迁移扩散,对生态系统造成巨大的环境隐患。本文总结了铊在水体中的分布特征,并重点阐述了铊在矿物胶体和天然有机质(腐殖酸)等界面上迁移转化行为的研究进展。研究表明,铁(氢)氧化物、锰(氢)氧化物均能在一定程度上吸附水体中的Tl(I),铊在一些锰(氢)氧化物表面的吸附行为可能会涉及Tl(I)在矿物表面的氧化还原机制。矿物表面对铊离子的吸附作用不仅与矿物的组成成分有关,还可能与矿物组成成分的晶型结构密切相关。天然有机质对铊迁移转化影响作用的研究目前主要偏重天然腐殖酸对铊的络合作用。因此,要加强的研究铊分别在不同种类、不同晶型的矿物和不同类型的天然有机质界面上的迁移转化行为,并借助高精度的价态和结构分析手段从分子水平上探讨其迁移转化机理。了解铊在水体中的迁移转化有助于深入认识铊的环境地球化学行为,并为研究铊的污染治理提供理论基础。     

Optimum conditions for the formation of Al13 polymer and active chlorine in electrolysis process with Ti/RuO2-TiO2 anodes

A polyaluminum containing a high concentration of Al₁₃ polymer and active chlorine (PACC) was successfully synthesized by a new electrochemical reactor using Ti/RuO₂-TiO₂ anodes. PACC can potentially be used as a dual-function chemical reagent for water treatment. The obtained results indicated that the formation of Al₁₃ polymer and active chlorine, were the most active components in PACC responsible for coagulation and disinfection respectively. These components were significantly influenced by electrolyte temperature, current density, and stirring rate. It was observed that high electrolyte temperature favored the formation of Al₁₃. Increasing current density and stirring rate resulted in high current efficiency of chlorine evolution, thus favoring the generation of Al₁₃ and active chlorine in PACC. When the PACC (Al_T = 0.5 mol/L, basicity = 2.3) was prepared at the optimum conditions by electrolysis process, the Al₁₃ polymer and active chlorine in product reached above 70% of Al_T and 4000 mg/L, respectively. In the pilot scale experiment with raw polyaluminum chloride used as an electrolyte, PACC was successfully prepared and produced a high content of Al₁₃ and active chlorine products. The pilot scale experiment demonstrated a potential industrial approach of PACC preparation.     

Relationship between groundwater cadmium and vicinity resident urine cadmium levels in the non-ferrous metal smelting area,China

● This study systematically examined the relationship between groundwater Cd and UCL. ● The study covered 211 UCL and sociological characteristic from nine groundwater samples. ● We found a significant positive correlation between groundwater Cd and UCL. ● Smoking status and education level also significantly affected UCL. Cadmium (Cd) has received widespread attention owing to its persistent toxicity and non-degradability. Cd in the human body is mainly absorbed from the external environment and is usually assessed using urinary Cd. Hunan Province is the heartland of the Chinese non-ferrous mining area, where several serious Cd pollution events have occurred, including high levels of Cd in the urine of residents. However, the environmental factors influencing high urinary Cd levels (UCLs) in nearby residents remain unclear. Therefore, 211 nearby residents’ UCLs and the corresponding sociological characteristics from nine groundwater samples in this area were analyzed using statistical analysis models. Groundwater Cd concentration ranged from 0.02 to 1.15 μg/L, aligning with class III of the national standard; the range of UCL of nearby residents was 0.37–36.60 μg/L, exceeding the national guideline of 0–2.5 μg/L. Groundwater Cd levels were positively correlated with the UCL (P < 0.001, correlation coefficient 95 % CI = 9.68, R² = 0.06). In addition, sociological characteristics, such as smoking status and education level, also affect UCL. All results indicate that local governments should strengthen the prevention and abatement of groundwater Cd pollution. This study is the first to systematically evaluate the relationship between groundwater Cd and UCL using internal and external environmental exposure data. These findings provide essential bases for relevant departments to reduce Cd exposure in regions where the heavy metal industry is globally prevalent.     

Research progress on distribution,sources, identification,toxicity, and biodegradation of microplastics in the ocean,freshwater, and soil environment

• Microplastics are widely found in both aquatic and terrestrial environments. • Cleaning products and discarded plastic waste are primary sources of microplastics. • Microplastics have apparent toxic effects on the growth of fish and soil plants. • Multiple strains of biodegradable microplastics have been isolated. Microplastics (MPs) are distributed in the oceans, freshwater, and soil environment and have become major pollutants. MPs are generally referred to as plastic particles less than 5 mm in diameter. They consist of primary microplastics synthesized in microscopic size manufactured production and secondary microplastics generated by physical and environmental degradation. Plastic particles are long-lived pollutants that are highly resistant to environmental degradation. In this review, the distribution and possible sources of MPs in aquatic and terrestrial environments are described. Moreover, the adverse effects of MPs on natural creatures due to ingestion have been discussed. We also have summarized identification methods based on MPs particle size and chemical bond. To control the pollution of MPs, the biodegradation of MPs under the action of different microbes has also been reviewed in this work. This review will contribute to a better understanding of MPs pollution in the environment, as well as their identification, toxicity, and biodegradation in the ocean, freshwater, and soil, and the assessment and control of microplastics exposure.     

烟气脱硫过程锰催化氧化亚硫酸钙的研究

利用直径280 mm、高320 mm的间歇式搅拌槽,在MnSO4加入浓度为0～0.05 mol/L的情况下,对亚硫酸钙悬浮液进行了催化氧化实验研究.实验结果表明,锰离子的加入会改变亚硫酸钙的氧化机理及氧化过程,表现为终点氧化率和氧化速率的变化.当Mn2 浓度为0.05 mol/L时,亚硫酸钙的终点氧化率比未加入Mn2 时高30%;此外,与非催化反应过程相比,Mn2 的加入能使亚硫酸钙在一个更宽的浓度范围内(0.02～0.073 mol/L)和一个更宽的时间范围内(20～100 min)均保持较高的氧化速率水平.