Preparation and Optimization of Starch/Poly Vinyl Alcohol/ZnO Nanocomposite Films Applicable for Food Packaging

Pollution and destruction of the environment due to the accumulation of non-degradable plastics are some of the most important concerns in the world. A significant amount of this waste is related to the polymers used in food packaging. Therefore, experts in the food industry have been looking for suitable biodegradable alternatives to synthetic polymers. Preparing biocompatible and biodegradable films based on starch is a good choice. In this study, various factors affecting films of starch/polyvinyl alcohol (PVA)/containing ZnO nanoparticles such as the amount of starch, PVA, glycerol, and ZnO were evaluated by response surface methodology (RSM). Film formation by solvent casting method, mechanical properties, swelling, solubility, and water vapor permeability (WVP) were selected as responses of RSM. The results showed that hydrogen bonding interactions between polyvinyl alcohol and starch improved the film formation. The effect of glycerol and PVA content on the mechanical strength was contrary to each other. As the amount of PVA increased, the tensile strength first decreased and then increased. The value of WVP was for all Runs from 0 to 6.77?×?10^??8 g m^??1 s^??1 Pa^??1. Finally, films with high film formation, maximum tensile strength, and high elongation at break, minimum solubility, permeability, and swelling were optimized.

     

Proteomics study of Southern Punjab Pakistani cobra (Naja naja: formerly Naja naja karachiensis) venom

Because of the potential of significant geographic variation in the compositions of snake venoms, much insight can be gained by examining individuals originating from diverse locations, and detailed characterization of any species can only be done by including animals from the entire range. Pakistani N. naja (formerly N. naja karachiensis) venom was decomplexed by applying diverse techniques and found a concoction of proteins (a total of 43 venomous proteins comprising 11 super families) from 6 to 200 kilodaltons in size. Among them three finger toxins (58%), phosphoplipses A₂ (19%), snake venom metalloproteinases (5%), l-amino acid oxidases (5%), helvepryns (3%), vespryns (2%), cobra venom factor (2%), 5′-nucleotidases (2%), venom nerve growth factor (2%), and Kunitz type serine protease inhibitor (2%) were included. It is the first report that this venom possesses significantly higher percentage of three finger toxins belonging to the cytotoxins (32% overall) and α‐neurotoxins (32% overall, predominately long chain neurotoxins, 24% overall) compared to N. naja from other geographic locations. Better understanding of intraspecific variations in venom can improve the development of location-specific anti-venoms. Furthermore, this pool of diverse toxins could potentially be a source of novel drug candidates for the treatment of muscarinic acetylcholine receptors mediated nervous disorders.     

Fate of selenium in biofortification of wheat on calcareous soil: an isotopic study

Selenium (Se) biofortification of staple cereal crops can improve the Se nutritional status of populations. A field trial employing an enriched stable isotope of Se (⁷⁷Se) was undertaken over three consecutive cropping seasons in a coarse-textured, calcareous soil in Gilgit-Baltistan, Pakistan. The objectives were to (1) assess the feasibility and efficiency of Se biofortification, (2) determine the fate of residual Se, and (3) assess the consequences for dietary Se intake. Isotopically enriched ⁷⁷Se (⁷⁷Se_Fert) was applied, either as selenate or as selenite, at three levels (0, 10, and 20 g ha^?1) to a wheat crop. Residual ⁷⁷Se_Fert availability was assessed in subsequent crops of maize and wheat without further ⁷⁷Se_Fert addition. Loss of ⁷⁷Se_Fert was c.35% by the first (wheat) harvest, for both selenium species, attributable to the practice of flood irrigation and low adsorption capacity of the soil. No ⁷⁷Se_Fert was detectable in subsequent maize or wheat crops. The remaining ⁷⁷Se_Fert in soil was almost entirely organically bound and diminished with time following a reversible (pseudo-)first-order trend. Thus, repeat applications of Se would be required to adequately biofortify grain each year. In contrast to native soil Se, there was no transfer of ⁷⁷Se_Fert to a recalcitrant form. Grain from control plots would provide only 0.5 µg person^?1 day^?1 of Se. By contrast, a single application of 20 g ha^?1 Se^VI could provide c. 47 µg person^?1 day^?1 Se in wheat, sufficient to avoid deficiency when combined with dietary Se intake from other sources (c. 25 µg day^?1).

     

A sustainable method for optimizing product design with trade-off between life cycle cost and environmental impact

In today’s competitive market, corporations have learned that taking sustainability issues into account can significantly improve their public image. Modern producers therefore must simultaneously reduce the environmental impact of their products and make economic gains. Therefore, making trade-offs between economic and environmental issues is required to ensure a company’s continuity. In doing so, companies have attached a great deal of importance to the new product design phase. However, optimization at the design stage becomes very complex for a product with a large number of parts, which can have several design alternatives with similar forms and functionality, but different costs and environmental impacts. In the automobile, shipbuilding and aircraft industries, if the conventional complete enumeration method is applied, the time required for selecting the optimal combination of design alternatives with respect to life cycle cost and environmental impact may exceed a human’s natural life span. To overcome this limitation, this paper introduces an optimization method for use as a design aid tool that enables a designer to assess the life cycle cost and environmental impact of his/her design very early in the product development process. To support the developed method, an illustration is provided using a case study on a locally manufactured automobile.     

Treatment of tannery wastewater in a pilot-scale hybrid constructed wetland system in Bangladesh

This paper reports the pollutant removal performances of a hybrid wetland system in Bangladesh for the treatment of a tannery wastewater. The system consisted of three treatment stages: a subsurface vertical flow (VF) wetland, followed by a horizontal flow (HF) and a VF wetland. The wetlands were planted with common reed (Phragmites australis), but employed different media, including organic coco-peat, cupola slag and pea gravel. In the first stage, experimental results demonstrated significant removal of ammonia (52%), nitrate (54%), BOD (78%), and COD (56%) under high organics loading rate (690 g COD m⁻² d⁻¹); simultaneous nitrification, denitrification, and organics degradation were attributed to the unique characteristics of the coco-peat media, which allowed greater atmospheric oxygen transfer for nitrification and organic degradation, and supply of organic carbon for denitrification. The second stage HF wetland produced an average PO₄ removal of 61%, primarily due to adsorption by the iron-rich cupola slag media. In the third treatment stage, which was filled with gravel media, further BOD removal (78%) from the tannery wastewater depleted organic carbon, causing the accumulation of NO₃ in the wastewater. Overall, the average percentage removals of NH₃-N, NO₃-N, BOD, COD, and PO₄ were 86%, 50%, 98%, 98% and 87%, respectively, across the whole hybrid system. The results provided a strong evidence to support widespread research and application of the constructed wetland as a low-cost, energy-efficient, wastewater treatment technology in Bangladesh.     

Antimony (Sb) – pollution and removal techniques – critical assessment of technologies

In view of increasing emissions of antimony (Sb) into the environment due to industrialization and consequent carcinogenicity, it is essential to remove this metal from the ecosystem. Antimony and arsenic (As) are analogs. Although numerous studies examined arsenic removal, few reports are available on Sb removal. In this review, various Sb removal techniques are described to understand how this process occurs and what research gaps are needed to improve efficiency. At present, surface adsorption technique is the most widely used for Sb removal. Biological treatment namely phytoremediation is also a promising method and more investigations are required in this regard. The selection of a suitable technique for a given area depends on the conditions including economic, environmental, and social conditions.     

Rapid adsorption of toxic Pb(Ⅱ) ions from aqueous solution using multiwall carbon nanotubes synthesized by microwave chemical vapor deposition technique

Multiwall carbon nanotubes(MWCNTs) were synthesized using a tubular microwave chemical vapor deposition technique, using acetylene and hydrogen as the precursor gases and ferrocene as catalyst. The novel MWCNT samples were tested for their performance in terms of Pb(Ⅱ)binding. The synthesized MWCNT samples were characterized using Fourier Transform Infrared(FT-IR), Brunauer, Emmett and Teller(BET), Field Emission Scanning Electron Microscopy(FESEM) analysis, and the adsorption of Pb(Ⅱ) was studied as a function of p H,initial Pb(Ⅱ) concentration, MWCNT dosage, agitation speed, and adsorption time, and process parameters were optimized. The adsorption data followed both Freundlich and Langmuir isotherms. On the basis of the Langmuir model, Qmaxwas calculated to be 104.2 mg/g for the microwave-synthesized MWCNTs. In order to investigate the dynamic behavior of MWCNTs as an adsorbent, the kinetic data were modeled using pseudo first-order and pseudo second-order equations. Different thermodynamic parameters, viz., ΔH0, ΔS0and ΔG0were evaluated and it was found that the adsorption was feasible, spontaneous and endothermic in nature. The statistical analysis revealed that the optimum conditions for the highest removal(99.9%) of Pb(Ⅱ) are at p H 5, MWCNT dosage 0.1 g, agitation speed 160 r/min and time of 22.5 min with the initial concentration of 10 mg/L. Our results proved that microwave-synthesized MWCNTs can be used as an effective Pb(Ⅱ) adsorbent due to their high adsorption capacity as well as the short adsorption time needed to achieve equilibrium.     

Predictors of poor outcomes among patients of acute methanol intoxication with particular reference to Sequential Organ Failure Assessment (SOFA) score

Environmental Science and Pollution Research - Methanol intoxication is a global problem with serious morbidities and mortalities. Apart from the lifelong disabilities experienced by methanol...     

Most Influential Parameters for the Bed-Load Sediment Flux Equations Used in Alluvial Rivers1

Khorram, Saeed and Mustafa Ergil, 2010. Most Influential Parameters for the Bed-Load Sediment Flux Equations Used in Alluvial Rivers. Journal of the American Water Resources Association (JAWRA): 46(6):1065–1090. DOI: 10.1111/j.1752-1688.2010.00468.x Abstract: Problems of bed-load sediment transport equations in alluvial rivers are addressed in this study where user-friendly parameters were developed. To determine the influences of 300 parameters on the final result, 52 selected bed-load equations for noncohesive particles (sand and gravel separately) were gathered and individually investigated. The influences of discrepancies among the computed and measured datasets were obtained by sensitivity analysis through multilinear regression method. The most influential parameters for the bed-load sediment flux equations used to describe sand particles in alluvial rivers are: the gravitational power due to Shields’ parameter with an energy slope, the universal stream power due to critical Shields’ parameter with an energy slope, the Shields’ parameter ratio, the critical unit stream power, and the Shields’ parameter with energy slope. For gravel particles, the most influential parameters are: the universal stream power due to critical Shields’ parameter with an energy slope, the Shields’ parameter ratio, the gravitational power due to Shields’ parameter with an energy slope, the Shields’ parameter with an energy slope, and the Froude number of the channel. It is expected that researchers working in this field will be able to use these predicted parameters to generate new bed-load sediment flux equations that give results that more closely agree with the actual values measured in alluvial rivers.     

The impact of age-related sub-chronic exposure to chlorpyrifos on metabolic indexes in male rats

Chlorpyrifos (CPF), an organophosphorus pesticide (OP), has been implicated in metabolic diseases; however, the data are controversial. Rising age has been