Application of fuzzy logic and sensitivity analysis for soil contamination hazard classification

The present article is aimed at illustrating a methodology for a rapid and effective assessment of pollution hazard connected with the presence of uncontrolled landfills. In particular, by means of a fuzzy approach, the criterion adopted allowed a comparison of the results obtained from a cross analysis of some intrinsic characteristics of the single landfills and the territory where they are located. Their identification shows the most relevant environmental problem. Therefore, we have classified each site within a hazard scale enabling us to understand which one requires to be checked more urgently, to do instrumental surveys and, if needed, to do restoration and reclamation. Moreover, the sensitivity analysis we carried out allowed us to identify which is the best membership function belonging and which is the best defuzzification method. That is, in particular, the trapezoidal function and the centroid method. The proposed fuzzy approach, supported by the sensitivity analysis, has revealed to be an important tool for supporting decisions, in order to optimise technical and economic resources.     

End-of-Life Vehicles management: Italian material and energy recovery efficiency

Each European Member State must comply with Directive 2000/53/EC recycling and recovery targets by 2015, set to 85% and 95%, respectively. This paper reports a shredder campaign trial developed and performed in Italy at the beginning of 2008. It turns out to be the first assessment about the critical aspects belonging to the Italian End-of-Life Vehicles (ELVs) reverse supply chain involving 18 dismantling plants, a shredder plant and 630 ELV representatives of different categories of vehicles treated in Italy during 2006. This trial aims at improving the experimental knowledge related to ELVs added waste, pre-treatment, part reuse, recycling and final metal separation and car fluff disposal. Finally, the study also focuses on the calculation of the effective Italian ELV recycling rate, which results equal to 80.8%, and auto shredder residue (ASR) characterization. According to the results obtained in this work, ASR still contains up to 8% of metals and 40% of polymers that could be recovered. Moreover, physical-chemical analysis showed a Lower Heat Value of almost 20,000 kJ/kg and revealed the presence of pollutants such as heavy metals, mineral oils, PCBs and hydrocarbons.     

Reduction of Cr(VI) by caffeic acid

In the soil-plant system, the Cr(VI) toxicity can be moderated through redox reactions involving phenolic substances. In such a context, we report the reducing activity of caffeic acid (CAF) towards Cr(VI) in aqueous phase. The redox reaction between Cr(VI) and CAF was studied as a function of both time and pH at different initial metal concentrations. The reaction was particularly effective at pH 2.5. The kinetic data indicate that the reaction proceeds through two steps: the first is faster and involves four electrons, the latter, which is slower, five electrons. The chromatograms evidence the formation of oxidation products (OP) with a different redox activity towards Cr(VI). A yield of Cr(III) equal to that obtained at pH 2.5 and pH 3.1 in about 7 and 25 h, respectively, was reached at pH 4.2 only after a much longer reaction time (50h). At pH>4.2 the reaction occurred even more slowly, and its kinetic trend was more and more difficult to study at pH values higher than 5.0 due to the formation of precipitates. Other phenolics investigated (o-, m-, p-coumaric acids) showed a reducing activity negligible compared to that of CAF: about 30% of p-coumaric acid was oxidized at pH 2.5 only after two months of reaction.     

Annoyance due to aircraft noise has increased over the years—Results of the HYENA study

In the HYENA study (HYpertension and Exposure to Noise near Airports) noise annoyances due to aircraft and road traffic noise were assessed in subjects that lived in the vicinity of 6 major European airports using the 11-point ICBEN scale (International Commission on Biological Effects of Noise). A distinction was made between the annoyance during the day and during the night. L_den and L_night were considered as indicators of noise exposure. Pooled data analyses showed clear exposure–response relationships between the noise level and the noise annoyance for both exposures. The exposure–response curves for road noise were congruent with the EU standard curves used for predicting the number of highly noise annoyed subjects in European communities. Annoyance ratings due to aircraft noise, however, were higher than predicted by the EU standard curves. The data supports other findings suggesting that the people's attitude towards aircraft noise has changed over the years, and that the EU standard curve for aircraft noise should be modified.     

Toxicity and biodegradation of the LAS surfactant 1-(p-sulfophenyl)nonane in presence of the ascidian Styela plicata

The main objective of this study, within development of engineering solutions for coastal areas depuration, was to establish the role of the benthic macro-organisms in the biodegradation of the detergents in marine environment and to estimate the toxicity of these substances for a particular marine species: the ascidian Styela plicata. The experimental studies undertaken in aquarium with seawater enriched in a pure lynear alkylbenzene sulfonate (LAS), the 1-(p-sulfophenyl)nonane (1C9-LAS), showed that the degradation was two times more fast in presence of the S. plicata, than of the only marine bacteria. The toxicity of this pollutant was also determined. This study demonstrates that the ascidia S. plicata can be a potential biomediator for the surfactant 1C9-LAS, and it can be used to design a pilot project, to bioremediate harbours and the coastal areas interested from the urban pollution.     

Mutagenic properties of linuron and chlorbromuron evaluated by means of cytogenetic biomarkers in mammalian cell lines

Agricultural practices are usually supported by several chemical substances, such as herbicides. Linuron and chlorbromuron are phenylurea herbicides largely used to protect crops from weeds, blocking photosynthesis by inhibition of the photosystem II complex. The former, also commercially known as lorox or afalon, is selectively used to protect bean and French bean plants, fennels, and celeriacs; the second, commercially known as maloran, is selectively used for carrots, peas, potatoes, soy sprouts, and sunflowers. Considering the widespread use of herbicides and, more generally, pesticides, it is important to clarify their involvement on human health, one of them concerning the possible direct or indirect effect on the genome of exposed populations. Here, we show that these herbicides are endowed by mutagenic properties, as demonstrated by an increased number of chromosomal aberrations (CAs) in two exposed Chinese hamster cell lines derived from ovary and epithelial liver, respectively. This was also confirmed by sister chromatid exchange (SCE) and micronucleus (MN) assays. Our present and previously obtained data clearly indicate that phenylurea herbicides must be used with great caution, especially for agricultural workers who use large amounts of herbicides during their work, and particular attention should be given to residues of these herbicides and their involvement in environmental pollution.     

Linking mean pore velocity and dispersivity to pore velocity distribution by advection–dispersion and stream tube modeling

Environmental Fluid Mechanics - A large set of experimental solute tracer breakthrough data (corresponding to more than 350 individual tracer breakthrough curves) in eight granular filter...     

Investigation of Thermoplasticity of Zein and Kafirin Proteins: Mixing Process and Mechanical Properties

Conventional direct melt mixing technology was investigated on zein and kafirin, two vegetable proteins extracted, respectively, from maize and sorghum. A lab scale internal mixer has been used to thoroughly study the thermo-plasticization process of the proteins with several plasticizers. Different compositions were investigated under different processing conditions. In particular, the lengthy procedures of forming the protein/solvent/plasticizer solution followed by drying or the protein/plasticizer emulsion followed by the precipitation of the extrudable resin, reported in the literature for these systems, were avoided and the protein and plasticizer were directly fed into the mixer to obtain a plastic-like material. The effect of plasticizer type and content and mixing process variables on the mechanical properties was analyzed. Compression molded slabs were transparent, strong and flexible, with properties similar to the cast films reported in the literature, prepared with the same type of plasticizers. However, lower plasticizer content was sufficient to produce equally flexible films, proving an enhanced plasticization efficiency of the mixing process, as compared to casting.