meteorological program for limiting power plant stack emission

This paper is directed to those individuals concerned with preserving the local air quality in areas affected by power plant operations. A meteorological forecast and field measurement program has been developed by the Tennessee Valley Authority for limiting stack emissions at the Paradise Steam Plant to preserve the air quality during adverse atmospheric dispersion conditions. Meteorological and plume dispersion criteria, developed from analysis of prior experience, govern the program. The criteria values are designed for limiting surface sulfur dioxide (SO₂) concentrations below an established threshold level.

Daily forecasts of vertical wind and temperature distribution, maximum surface temperature, and sky condition are issued each afternoon by the National Oceanic and Atmospheric Administration National Weather Service, Knoxville, Tennessee. Through use of power plant computer facilities, the forecast data are processed to determine quantitative criteria values. If the values indicate that the threshold level may be exceeded, an Air Pollution Control Notice (APCN) is issued that afternoon for the period 0900–1400 CST the following day, which is the expected period of maximum SO₂, surface concentrations. The APCN specifies the allowable SO₂ emission rate, in terms of megawatt load generation, which should prevent surface SO₂ concentrations from exceeding the established threshold level. Confirmation or cancellation of the APCN is made the following morning, based on plant-site meteorological field measurements taken at 0700–0730 CST. If confirmed, plant load generation is reduced to the designated level by 0900 CST and is continued no later than 1400 CST during the expected period of maximum SO2 surface concentrations.

The APCN conditions identified with the newer and larger TV A power plants with high stacks are associated with one principal regional weather pattern—a large surface high-pressure system, with weak-to-moderate anticyclonic circulation and pronounced stability throughout the lowest few thousand meters. With the limited mixing layer, or sometimes referred to as trapping- or capping-type dispersion associated with this weather condition, relatively high surface concentrations may persist 2–5 hours between 0900–1400 CST.     

Principal Plume Dispersion Models: TVA Power Plants

The body of information presented in this paper is directed to those individuals who may be concerned with principal plume dispersion models at coal-burning power plants. About 20 years of comprehensive field surveillance and documentation of dispersion of power plant emissions for a varied range of unit sizes, stack heights, and meteorological conditions have determined the Tennessee Valley Authority’s interpretation of principal plume dispersion models. TVA’s experience indicates that as unit sizes are increased and taller stacks are constructed, the plume dispersion model associated with maximum surface concentrations changes. Maximum surface concentrations for principal plume dispersion models were approximately equal for the early small plants. However, the coning model was considered the critical plume dispersion model because the frequency of recurrence of surface concentrations from this model was appreciably greater than other models.

There were progressive changes because of an increase in unit sizes and stack heights; the magnitude of maximum surface concentrations from the coning model decreased, and the magnitude (relative to the coning model) of concentrations from the inversion breakup model increased. However, with plumes from newer and larger units with higher stacks, the trapping dispersion model became prominent. Finally, by the time unit size had increased to 900 mw and stack height to about 245 meters, as at Bull Run Power Plant, the magnitude of surface concentrations associated with trapping had increased to such a degree that it became the critical dispersion model identified with power plants of this size.     

Full-Scale Study of Plume Rise At Large Coal-Fired Electric Generating Stations

This paper reports on the plume rise research project conducted by TVA under sponsorship of the U. S. Public Health Service. Plume rise data were collected at six coal-fired, steam-electric generating stations within the TVA system over a 2-year period. Unit ratings ranged from 173 to 704 Mw with stack heights varying from 250 to 600 ft. An instrumented helicopter and special photographic equipment were used to obtain 1580 separate plume observations and significant related meteorological parameters during stable, neutral, and slightly unstable conditions. The 1580 observations were resolved and consolidated into 133 composite observation periods covering 30 to 120 min. Meteorological parameters and other compiled input data were entered into four principal equations for calculation of plume rise, and calculated plume rise values were compared with observed values. Most equations overestimated plume rise in low wind speed. For moderately high wind speeds, the Carson and Moses and the Concawe equations gave best fit.     

A Comparison of Conductivity And West-Gaeke Analyses For Sulfur Dioxide

A comparison of the two most common methods used by air pollution control agencies for the analyses of sulfur dioxide is discussed in this paper. Samples were collected simultaneously (502 pairs) for an eight month period at eight sites in the City of Chicago, using the West-Gaeke and conductivity methods. These methods are analyzed statistically to ascertain the existence of a factor describing adequately any differences between methods.     

A Study of Wood Stove Particulate Emissions

Particulate emission factors for two wood stove models have been determined for two types of fuel and a range of operating conditions. The emission factors range from 1 g/kg (fuel) to 24 g/kg. A model is presented which represents the emission factor as a simple function of the ratio of fuel load to combustion rate, or the length of time between refueling. This model is felt to be appropriate for evaluating the impact of wood-based residential space heating on ambient air concentrations of particulate matter If certain assumptions can be made about stove operating conditions. An application of the emission factor model to a typical community suggests that the contribution of wood stoves to ambient particulate levels might reach 100 μg/m³ if the entire heating load were carried by wood.

Preliminary analyses of the particulate matter Indicate that benzene extractables range from 42% of the total particulate mass at short refuel times to 67% at longer refuel times. About 45% of the mass of benzene extractables appeared in the neutral fraction of acid base extractions. Polycyclic aromatic hydrocarbons are expected to be included in this neutral fraction.     

Fly Ash from Electrostatic Precipitators: Characterization of Large Spheres

The body of information contained in this paper is directed towards individuals concerned with the toxicology and physical state of airborne effluents from pulverized coal-fired stationary sources. A flotation/sedimentation technique was used to separate fly ash from power plant clean-up devices into light, medium, and high density fractions. Large spherical particles were selected from each fraction and examined by optical and scanning electron microscopy. Attempts were made to identify pleurospheres (filled hollow spheres) by crushing the spheres in situ under the optical microscope. In no cases were filled spheres observed, suggesting that they are not a common structure in fly ash. Several phenomena which generate hollow spheres are discussed.     

Demolition of High-Rise Public Housing Increases Particulate Matter Air Pollution in Communities of High-Risk Asthmatics

Abstract

Public housing developments across the United States are being demolished, potentially increasing local concentrations of particulate matter (PM) in communities with high burdens of severe asthma. Little is known about the impact of demolition on local air quality. At three public housing developments in Chicago, IL, PM with an aerodynamic diameter <10 μm (PM₁₀) and <2.5 μm were measured before and during high-rise demolition. Additionally, size-selective sampling and real-time monitoring were concurrently performed upwind and downwind of one demolition site. The concentration of particulates attributable to demolition was estimated after accounting for background urban air pollution. Particle microscopy was performed on a small number of samples. Substantial increases of PM₁₀ occurred during demolition, with the magnitude of that increase varying based on sampler distance, wind direction, and averaging time. During structural demolition, local concentrations of PM₁₀ 42 m downwind of a demolition site increased 4- to 9-fold above upwind concentrations (6-hr averaging time). After adjusting for background PM₁₀, the presence of dusty conditions was associated with a 74% increase in PM₁₀ 100 m downwind of demolition sites (24-hr averaging times). During structural demolition, short-term peaks in real-time PM₁₀ (30-sec averaging time) occasionally exceeded 500 μg/m³. The median particle size downwind of a demolition site (17.3 μm) was significantly larger than background (3 μm). Specific activities are associated with real-time particulate measures. Microscopy did not identify asbestos or high concentrations of mold spores. In conclusion, individuals living near sites of public housing demolition are at risk for exposure to high particulate concentrations. This increase is characterized by relatively large particles and high short-term peaks in PM concentration.     

Aseptic hydroponics to assess rhamnolipid-Cd and rhamnolipid-Zn bioavailability for sunflower (<Emphasis Type="Italic">Helianthus annuus</Emphasis>): a phytoextraction mechanism study

The availability of cadmium (Cd) and zinc (Zn) to sunflower (Helianthus annuus) was investigated in rhamnolipid- and ethylenediaminetetraacetic acid (EDTA)-buffered solutions in order to evaluate the influence of aqueous speciation of the metals on their uptake by the plant, in relation to predictions of uptake by the free ion activity model (FIAM). Free metal ion activity was estimated using the chemical equilibrium program MINTEQ or measured by Donnan dialysis. The uptake of Cd followed the FIAM for the EDTA-buffered solution at EDTA concentrations below 0.4 μM; for the rhamnolipid-buffered solution, the uptake of both metals in roots was not markedly affected by increasing rhamnolipid concentrations in solution. This suggests rhamnolipid enhanced metal accumulation in plant roots (per unit free metal in solution) possibly through formation and uptake of lipophilic complexes. The addition of normal Ca concentrations (low millimetre range) to the rhamnolipid uptake solutions reduced Cd accumulation in shoots by inhibiting Cd translocation, whereas it significantly increased Zn accumulation in shoots. This study confirms that although rhamnolipid could enhance accumulation of Cd in plants roots at low Ca supply, it is not suitable for Cd phytoextraction in contaminated soil environments where Ca concentrations in soil solution are orders of magnitude greater than those of Cd.     

Determination of indicator polychlorinated biphenyls (PCBs) by gas chromatography–electron capture detector

An effective method for determination of indicator polychlorinated biphenyls (PCBs) has been validated using gas chromatography (GC) equipped with electron capture detector (ECD). The GC–ECD method was validated by determining the linear range (working range) for determination of the compounds, minimum detectable quantities (MDQ), the precision and accuracy of the method for the analysis of the compounds. MDQ obtained for the compounds ranges from 0.0005 to 0.002 ng. Indeed the method was found to be more sensitive as the number of chlorine atoms attached to the biphenyl increases. The precision and accuracy of the GC method validated ranges from 2.4% to 14.5% and −7.0% to 14.6% respectively. Coefficient of variation associated with the repeatability of the retention times and corresponding peak areas was found to be 0.0001–0.0007 for the retention times and 0.0014–0.059 for the peak areas. Percentage recoveries for the compounds were in the range of 95.7–101.0%. The validated method was then applied to determine levels of indicator PCBs in sediments sampled from eleven sampling points along the Lake Bosuntwi in Ghana and the highest PCB load of 19.17 ng g⁻¹ was recorded at Pipie No. 2. PCB 52 and PCB 101 were found to be the most ubiquitous indicator PCBs in the study area, both with 90.91% occurrence.     

Antecedents of early career stage mentoring among Chinese employees

This study examined the mediating influence of protege‐initiated mentoring relationships on the relationship between personality and situational characteristics and mentoring received. Data were obtained from Hong Kong Chinese graduate employees (N=184) in their early career stage. Results of the regression analysis showed that protege‐initiated mentoring relationships mediated the relationship between the personality (extraversion) but not the situational (individual development culture and opportunities for interactions on the job) characteristics and mentoring received. In other words, extraversion was indirectly related to mentoring received through protege‐initiated mentoring relationships but individual development culture and opportunities for interactions on the job were directly related to mentoring received. Additionally, opportunities for interactions on the job indirectly influenced mentoring received through protege‐initiated mentoring relationships. Limitations of the study, implications of the findings and directions for future research are discussed. Copyright © 1999 John Wiley & Sons, Ltd.