Comparative study of extraction methods for the determination of PAHs from contaminated soils and sediments

The following four methods were compared on the extraction efficiency of 16 EPA (US Environmental Protection Agency) polycyclic aromatic hydrocarbons (PAHs): German method of the Verband Deutscher Landwirtschaftlicher Untersuchungs und Forschungsanstalten (VDLUFA), two methods of the International Organization for Standardization using shaking (ISO A) and Soxhlet extraction (ISO B) and an ultrasonic method. Recovery rates of 16 PAHs were determined in two soils. Extraction efficiency was evaluated in five soils and three sediments. Effect of drying soils and sediments on extraction efficiency was tested using the VDLUFA and the ultrasonic methods. Our study shows that the number of aromatic rings, rather than extraction procedures, significantly influenced recovery rates of individual PAHs. No significant differences in extraction efficiency of the four methods were observed for less polluted samples. For highly polluted soils, extraction efficiency decreased in the following order: VDLUFA method > ISO A > ultrasonic method > ISO B. Influence of soil moisture on extraction efficiency depended to some extent on both solvent used and content of PAHs in samples. A mixture of dichloromethane/acetone (5:1) is recommended for PAH extraction from moist samples when the ultrasonic method is used.     

层状氢氧化镁铝对偶氮染料酸性黑10B的脱色性能研究

分别用层状氢氧化镁铝(LDH)和焙烧层状氢氧化镁铝(CLDH)作为吸附剂吸附脱除水溶液中偶氮染料酸性黑10B.考察了脱色时间、pH值、吸附剂的投加量、温度、染料初始浓度和焙烧温度等因素对脱色率的影响.结果表明,LDH及CLDH对酸性黑10B染料具有良好的脱除效果,室温下,10g/L LDH和1g/L的CLDH对浓度为100mg/L的染料的脱色率分别达95.93%和99.97%.pH值是影响吸附能力的关键因素,吸附剂对溶液pH值有一定缓冲作用.LDH及CLDH对酸性黑10B吸附结果符合Langmuir吸附等温式.饱和吸附后的LDH及CLDH用高温热解法再生,吸附性能良好,随再生次数增多,脱色率下降.     

Ce掺杂改性对MnFe2O4低温选择性催化还原脱硝性能的影响研究

采用水热合成法制备了Ce掺杂MnFe2O4催化剂,用于低温选择性催化还原(SCR)脱硝.对催化剂晶型、脱硝性能和表面结构等进行分析,结果表明,Ce/(Fe+Mn)为0.5％(摩尔分数,下同)时催化剂表现出最优的SCR活性,80℃NO去除率可达100％;Ce/(Fe+Mn)分别为5.0％ 和10.0％ 时,催化剂80℃N...     

Gliding arc plasma processing for decomposition of chloroform

The decomposition of chloroform (CHCl₃) diluted in air was studied. The experiment was carried out by using a gliding arc plasma. Different values of initial concentrations of chloroform, total gas flow rates, and input power frequencies have been used to investigate this effects on the conversion reaction products both qualitatively and quantitatively. Experimental results indicate that the maximum conversion of chloroform was 97% at a total gas flow rate of 180?L?h^?1 containing 1% chloroform. Using air as carrier gas, decomposition of CHCl₃ produces CCl₄, CO₂, CO, and Cl₂ as the main products. Small amounts of HCl and COCl₂ are also detected. Liquid products were also produced.     

Methodology for an urban ecological footprint to evaluate sustainable development in China

The ecological footprint (EF) is a method for measuring sustainable development through ecological impact. A methodology is presented for predicting urban ecological footprints. Urban energy use and natural resource consumption were analyzed to calculate an EF based on land type (arable, pasture, forest, fossil energy land, built-up area and water area) and consumption (food, housing, transportation, goods, services and waste). The result was then compared with the local ecological carrying capacity to develop criteria for sustainable ecological footprints. Case studies of four cities in China (Guangzhou, Ningbo, Suzhou and Yangzhou) illustrate the urban EF approach. The time series of EF in a case study of Guangzhou for 1991–2001 was analyzed and the consumption–land-use matrix of urban EF was established. The results show that the cities are ecologically unsustainable, with average ecological conflicts per capita of more than 2 ha. The urban EF method is useful to measure urban sustainable development and provides policy proposals for decision-making. However, the EF method still has limitations and weaknesses.     

链霉菌的抗砷特性及其对蜈蚣草富集砷的作用

本文研究了链霉菌Streptomyces sp.的耐砷特性及其对蜈蚣草富集砷的影响。结果表明,Streptomyces sp.可在100mmo·lL-1的砷酸盐溶液中生长,具有较强的抗砷毒害能力,且在48h内对As(Ⅴ)的还原率达96.5%。施用Streptomyces sp.能促进植物对砷的吸收,蜈蚣草地上部砷浓度为930mg·kg-1,地上部砷累积量达到对照组的2.09倍。加入Streptomyces sp.后,能促进根际土壤中As(Ⅴ)还原成As(Ⅲ),大幅度降低根际土壤残渣态砷含量,从48.15mg·kg-1下降至28.75mg·kg-1。Streptomyces sp.通过影响蜈蚣草根际环境,提高根际土壤pH,增加DOC含量,促使砷形态变化,从而增加砷生物可利用性。该菌可作为强化蜈蚣草修复砷污染土壤的材料。     

我国区域空气污染治理效率及其影响机制——基于超效率SBM模型和门槛回归模型

随着人民对美好生活需求的日益增长,政府空气污染治理的效率问题日益得到重视。本文从地方政府空气污染治理效率及其影响因素的视角入手,以全国30个省份为研究对象,运用超效率SBM模型测算2003—2015年各省级区域的空气污染治理效率。在此基础上,运用门槛回归模型分析政府空气污染治理效率的影响机制。研究表明:①地区间空气污染治理效率差异性较为显著。中部、西部空气污染治理效率整体呈下降趋势。东部和东北地区空气污染治理效率则上升比较平稳。②政策规划、碳源、污染物排放和环境治理投入表现出双重门槛特征,其中碳源对空气污染治理效率影响显著,而以碳为首的能源消费结构则主要对中部和西部空气污染治理效率产生影响。落后地区政府应注重产业升级,财政上应对碳税等税目进行征收,产业上应鼓励企业创新,并对落后企业进行倒逼升级。     

关于“十四五”土壤、地下水与农业农村生态环境保护的思考

净土保卫战和农业农村污染治理攻坚战是污染防治攻坚战的重要组成部分。本文对"十四五"及今后一个时期土壤、地下水和农业农村生态环境保护总体形势进行了分析,研究提出"十四五"目标指标、重点任务和政策措施的建议,提出坚持问题导向、目标导向,坚持分类施策、精准治污,以解决人民群众关心的突出环境问题为重点,实施一批源头预防、风险管控、治理修复重大工程,推进土壤、地下水和农业农村生态保护治理体系与治理能力现代化,为美丽中国建设提供坚实保障。     

Effect of pipes in heat pump system on electric vehicle energy saving

ABSTRACT

Refrigerant pressure drop and temperature change in pipes are normally ignored in the thermodynamic analysis of traditional vehicle air conditioning system, this will result in serious errors. In this Paper, pressure drop and temperature difference are simulated in different pipes of electric vehicle (EV) heat pump system to analysis the effects of pipes in the actual EV heat pump system. The results indicate that the greater the mass flow, the faster pressure drop increases, the temperature difference decreases. Pressure drop of saturated liquid refrigerant is smaller than that of saturated gas refrigerant at the same saturation pressure and mass flow rate. The higher the refrigerant pressure (no phase change), the slower pressure drop decreases, the faster the temperature difference decreases. Pressure drop decreases with the increment of bending angle of the pipe. For EV heat pump system, suitable valves and less branches are helpful for energy saving of the system. Shortening the pipe between compressor and condenser can reduce temperature change obviously. Pressure drop per unit length in the pipe between evaporator and compressor is large especially in heating mode because of lower refrigerant density. It even reaches to over 100 times of that in the pipe between condenser and throttle valve in heating mode and has negative effects on the performance of the system. If the evaporator is closer to the compressor and the number of branches is less, then pressure drop will decrease a lot, which will be advantageous for energy saving of the heat pump system.