Interoperable web GIS services for marine pollution monitoring and forecasting

This paper presents services and systems developed in the FP6 InterRisk (Interoperable GMES Services for Environmental Risk Management in Marine and Coastal Areas of Europe) project, which addresses the need for better access to information for risk management in Europe, both in cases of natural hazards and industrial accidents. The overall objective of the project is to develop a pilot system for interoperable GMES monitoring and forecasting services for environmental management in marine and coastal areas. This pilot system is based on established and widely adopted web-GIS standards, in line with INSPIRE recommendations. The pilot is comprised of, among other things, a portal and a web-GIS map viewer, both developed using open source tools. Providers using commercial tools adhering to the adopted standards, however, can also deliver products to the InterRisk pilot. The InterRisk services and system are based on a combination of free and commercial software, and have been demonstrated to end-users in three European areas: Norwegian, UK and Irish waters, and German and Polish waters. Products and services offered in these areas are presented, along with an outline of the technical development of web-GIS clients and portals.

Temperature cues gametogenesis and larval release in a tropical sponge

Determining the reproductive processes of benthic invertebrates is central to our understanding of their recruitment and population dynamics. Sexual reproduction of the gonochoric and viviparous Great Barrier Reef sponge, Luffariella variabilis (Poléjaeff 1884) was quantified from histological samples collected over two reproductive seasons (2004 and 2005). Gametogenesis commenced for females at a water temperature of 21°C, the lowest water temperature of the year. Spermatogenesis occurred above 22.5°C with sperm asynchronously developed and released from August or September to October. Oocytes developed asynchronously from July to September, embryos from September to December, and larvae from November to December. Female reproduction terminated in December (after larval release) prior to the highest mean annual water temperature of 30°C in January. There was a significant (35%) decrease in female reproductive output in 2005 compared to 2004, as measured by the reproductive index (0.68 ± 0.12 female reproductive propagules mm⁻² of mesohyl in 2005 compared with 1.05 ± 0.10 mm⁻² in 2004). This corresponded with delayed oogenesis and spermatogenesis, and a shortened larval development cycle corresponding with a delayed minimum temperature (21°C) in August of 2005 compared with July 2004. Accordingly, the maximum percentage of the mesohyl occupied by female reproductive propagules (eggs, embryos and larvae) was also reduced by 60% in 2005 (overall mean of 13.04% in October 2004 compared with 5.35% in October 2005). However, the mean sizes of individual female propagules remained the same from year to year. Males in contrast, showed no overall difference in either reproductive index or percentage occupation of the mesohyl between 2004 and 2005. The lowered reproductive output (∼35%) of females of L. variabilis associated with delayed minimum water temperatures may have important implications for population reproductive success where oogenesis and spermatogenesis and larval release are cued by minimum and maximum water temperatures, respectively.     

Cyanide generation during preservation of chlorinated wastewater effluent samples for total cyanide analysis.

Dechlorinating agents and pH adjustment are often used to preserve wastewater samples for cyanide analysis. The effects of four approved preservation protocols on the results of the total cyanide analysis of effluents from four water reclamation plants were examined. The results differed widely, and a clear pattern emerged. Immediate analysis without pH adjustment generally gave total cyanide concentrations below the reporting limit of 5 microg/L, irrespective of the dechlorinating agents used. When the pH was adjusted to > or =12, a slight increase in the measured total cyanide concentration was observed when thiosulfate was used to dechlorinate the samples, and a significant increase (>10 microg/L) was observed when arsenite was used as the dechlorinating agent. These results provide evidence that approved preservation protocols may give rise to cyanide formation in chlorinated wastewater effluent matrices.     

Wood pellet fly ash and bottom ash as an effective liming agent and nutrient source for rye grass (Lolium perenne L.) and oats (Avena sativa)

Fly ash (FA) and bottom ash (BA) from a softwood pellet boiler were characterized and evaluated as soil amendments. In a greenhouse study, two plant species (rye grass, Lolium perenne L. and oats, Avena sativa) were grown in three different treatments (1% FA, 1% BA, non-amended control) of a silty loam soil. Total concentrations of plant nutrients Ca, K, Mg, P and Zn in both ashes were elevated compared to conventional wood ash. Concentrations of Cd, Cr, Pb, Se and Zn were found to be elevated in the FA relative to BA and the non-amended soil. At 28 d, oat above-ground biomass was found to be significantly greater in soil amended with FA. Potassium and Mo plant tissue concentrations were significantly increased by addition of either ash, and FA significantly increased Zn tissue concentrations. Cadmium and Hg tissue concentrations were elevated in some cases. As soil amendments, either pellet ash is an effective liming agent and nutrient source, but high concentrations of Cd and Zn in FA may preclude its use as an agricultural soil amendment in some jurisdictions. Lower ash application rates than those used in this study (i.e. <1%) may still provide sufficient nutrients and effective neutralization of soil acidity.     

A framework for evaluating OSH program effectiveness using leading and trailing metrics

Introduction

Many employers and regulators today rely primarily on a few past injury/ illness metrics as criteria for rating the effectiveness of occupational safety and health (OSH) programs. Although such trailing data are necessary to assess program success, they may not be sufficient for developing proactive safety, ergonomic, and medical management plans.

Methods

The goals of this pilot study were to create leading metrics (company self-assessment ratings) and trailing metrics (past loss data) that could be used to evaluate the effectiveness of OSH program elements that range from primary to tertiary prevention. The main hypothesis was that the new metrics would be explanatory variables for three standard future workers compensation (WC) outcomes in 2003 (rates of total cases, lost time cases, and costs) and that the framework for evaluating OSH programs could be justifiably expanded. For leading metrics, surveys were developed to allow respondents to assess OSH exposures and program prevention elements (management leadership/ commitment, employee participation, hazard identification, hazard control, medical management, training, and program evaluation). After pre-testing, surveys were sent to companies covered by the same WC insurer in early 2003. A total of 33 completed surveys were used for final analysis. A series of trailing metrics were developed from 1999-2001 WC data for the surveyed companies. Data were analyzed using a method where each main 2003 WC outcome was dichotomized into high and low loss groups based on the median value of the variable. The mean and standard deviations of survey questions and 1999-2001 WC variables were compared between the dichotomized groups. Hypothesis testing was performed using F-test with a significance level 0.10.

Results/Discussion

Companies that exhibited higher musculoskeletal disorder (MSD) WC case rates from 1999-2001 had higher total WC case rates in 2003. Higher levels of several self-reported OSH program elements (tracking progress in controlling workplace safety hazards, identifying ergonomic hazards, using health promotion programs) were associated with lower rates of WC lost time cases in 2003. Higher reported exposures to noise and projectiles were also associated with higher rates of WC cases and costs in 2003.

Impact on Industry

This research adds to a growing body of preliminary evidence that valid leading and trailing metrics can be developed to evaluate OSH effectiveness. Both the rating of OSH efforts and the regular trending of past loss outcomes are likely useful in developing data-driven improvement plans that are reactive to past exposures and proactive in identifying system deficiencies that drive future losses.     

Using persuasive messages to encourage voluntary hearing protection among coal miners

INTRODUCTION: This longitudinal field study was designed to encourage Appalachian coal miners in West Virginia and Pennsylvania to engage in hearing-protection behaviors. METHOD: Participants were mailed postcards that featured either a positive, negative, or neutral message on the outside of the postcard and a message encouraging hearing protection behaviors on the inside. The first posttest measurement of the effectiveness of the persuasive messages was conducted about a week after the postcards were mailed. The delayed posttest measurement was conducted six weeks later. RESULTS: Responses from 307 coal miners revealed that the positive or neutral messages generated significantly more self-reported hearing protection behaviors than the negative message. Identical results were obtained in a delayed posttest assessment of miners' self-reported hearing protection behaviors. The positive message was also more effective than either the neutral or negative message in preventing defensive mechanisms from emerging over time. IMPACT ON INDUSTRY: Positive and neutral messages were convincingly more successful than negative messages in facilitating self-reported hearing protection behaviors among coal miners. Similarly, the positive messages kept defensive processes at bay.     

A methodology for assessing blast protection in explosive ordnance disposal bomb suits.

To reduce human casualties associated with explosive ordnance disposal, a wide range of protective wear has been designed to shield against the blast effects of improvised explosive devices and munitions. In this study, 4 commercially available bomb suits, representing a range of materials and armor masses, were evaluated against 0.227 and 0.567 kg of spherical C-4 explosives to determine the level of protection offered to the head, neck, and thorax. A Hybrid III dummy, an instrumented human surrogate [1], was tested with and without protection from the 4 commercially available bomb suits. 20 tests with the dummy torso mounted to simulate a kneeling position were performed to confirm repeatability and robustness of the dummies, as well as to evaluate the 4 suits. Correlations between injury risk assessments based on past human or animal injury model data and various parameters such as bomb suit mass, projected area, and dummy coverage area were drawn.     

A simulator study of driving behavior and mental workload in mixed-use arterial road environments

Objectives: Mixed-use urban environments, such as arterial roads with adjacent commercial land uses, represent crash locations with the highest risk. These locations are often characterized by high volumes of motor vehicle traffic, on-street parking, and interactions with multiple road user groups such as pedestrians, cyclists, and public transportation. The objective of this study was to investigate previously identified crash risk factors for mixed-use urban environments and assess how parking occupancy, center medians, and cyclist volume influence performance and workload in a driving simulator study.

Methods: Thirty participants were recruited for the study. Participants completed 6 drives that presented different combinations of cyclist volume, median condition, and parking occupancy. Incorporated into the simulator drives was a secondary peripheral detection task (PDT) designed to measure mental workload. Participants provided subjective assessments of workload using the Rating Scale Mental Effort (RSME).

Results: Mean lateral lane position was found to significantly vary across the 3 independent variables of parking occupancy, cyclist volume, and median conditions. No significant changes were identified for mean speed across the conditions. Subjective and objective measures of workload identified changes due to the presence of cyclists with slower reaction times for the PDT task when cyclists were present.

Conclusion: The findings provide insight into the interaction of road design elements in mixed-use urban road environments and demonstrate that increasingly complex environments increase driver demand. This has important road design implications for mixed-use arterial roads, which are often characterized by complex interactions between multiple road user groups.